Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
OSG
Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | Long-Neck Ball | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] | 0.75 ~ 4.5 | 3 | For High Hardness (Silicon Group) | 50 ~ 70 | 4 ~ 30 | 4 ~ 6 |
EIKOSHA
Carbide Graphite Solid Ball End Mill 2-Flute, Long Type
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
1 ~ 15 | Ball | Aluminum[◎] / Copper[◎] / Graphite[◎] | 20 ~ 80 | 2 | - | 120 ~ 250 | - | 4 ~ 25 |
EIKOSHA
Carbide Air Hole Ball End Mill 2-Flute, Standard Type
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 12.5 | Ball | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | 20 ~ 60 | 2 | - | 70 ~ 180 | - | 6 ~ 25 |
EIKOSHA
Carbide Air Hole Ball End Mill 2-Flute, Long Type
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
3.25 ~ 12.5 | Ball | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | 40 ~ 80 | 2 | - | 150 ~ 250 | - | 6 ~ 25 |
EIKOSHA
Carbide Air Hole Ball End Mill 4-Flute, Standard Type
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
2 ~ 12.5 | Ball | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | 20 ~ 60 | 4 | - | 70 ~ 180 | - | 6 ~ 25 |
EIKOSHA
Carbide Air Hole Ball End Mill 4-Flute, Long Type
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
3 ~ 12.5 | Ball | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | 40 ~ 80 | 4 | - | 150 ~ 250 | - | 6 ~ 25 |
SANKO MFG
DLGCALBE, DL-Coated Carbide 2-Flute for Aluminium, Ball Nose
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
8 | Ball | Aluminum[◎] / Copper[◎] | 40 | 2 | DLC | 140 | - | 16 |
ATOM
Small Diameter Ball End Mill, 2-Flute
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.05 ~ 0.475 | Ball | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | 0.2 ~ 2.5 | 2 | Non-Coated | 40 | - | 3 |
ATOM
Standard Ball End Mill, 2-Flute
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 10 | Ball | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | 3 ~ 40 | 2 | Non-Coated | 40 ~ 105 | - | 4 ~ 20 |
ATOM
Standard Ball End Mill, 4-Flute
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 10 | Ball | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | 3 ~ 40 | 2 | Non-Coated | 40 ~ 105 | - | 4 ~ 20 |
EIKOSHA
Carbide Graphite Solid Tapered Ball End Mill with 4 Flutes Standard Type GBES4
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
1.5 ~ 15 | Ball | Aluminum[◎] / Copper[◎] / Graphite[◎] | 20 ~ 60 | 4 | - | 90 ~ 180 | - | 6 ~ 25 |
EIKOSHA
Carbide Graphite Solid Tapered Ball End Mill with 4 Flutes Long Type GBEL4
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
1.5 ~ 15 | Ball | Aluminum[◎] / Copper[◎] / Graphite[◎] | 30 ~ 80 | 4 | - | 120 ~ 250 | - | 6 ~ 25 |
EIKOSHA
Carbide Solid Ball End Mill CSBE
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.4 ~ 20 | Ball | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | 3 ~ 70 | 2 | - | 45 ~ 180 | - | 4 ~ 32 |
KYOWA SEIKO
CBN 2-Flute Spiral Ball-End Mill SBBE-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | Ball | High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | 0.2 ~ 3.5 | 2 | - | 50 ~ 60 | - | 6 |
KYOWA SEIKO
CBN 2-Flute Spiral Ball-End Mill SBBEF-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1.5 | Ball | High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | 0.2 ~ 2 | 2 | - | 50 ~ 60 | - | 4 |
KYOWA SEIKO
CBN 3-Flute Spiral Ball-End Mill SBBE-3
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | Ball | High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | 1 ~ 3.5 | 3 | - | 50 ~ 60 | - | 6 |
KYOWA SEIKO
PCD 2-Flute Spiral Ball-End Mill DBE-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 2.5 | Ball | Aluminum[◎] / Copper[◎] / Graphite[◎] | 0.2 ~ 3 | 2 | - | 50 ~ 60 | - | 4 ~ 6 |
KYOWA SEIKO
PCD Ball End Mill with 2 Flutes for Carbide Machining DCBE-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.2 ~ 1 | Ball | - | 0.3 ~ 1.5 | 2 | - | 50 | - | 4 |
KYOWA SEIKO
Carbide Ball End Mill for Resin Processing PSB-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | Ball | Aluminum[◎] / Resin[◎] | 0.6 ~ 20 | 2 | - | 45 ~ 100 | - | 3 ~ 6 |
KYOWA SEIKO
Carbide Ball End Mill for Rib for Resin Processing PRB-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 2.5 | Ball | Aluminum[◎] / Resin[◎] | 0.3 ~ 6 | 2 | - | 45 ~ 100 | - | 4 ~ 6 |
KYOWA SEIKO
Carbide Miniature Ball End Mill KMBE-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1.5 | Ball | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] | 0.4 ~ 8 | 2 | - | 40 | - | 3 |
KYOWA SEIKO
Carbide Long Ball End Mill KLB-2
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | Long-Neck Ball | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] | 1 ~ 50 | 2 | - | 40 ~ 100 | - | 3 ~ 6 |
NS TOOL
Aluminium Ball-End Mill (DLC Coating) ALB225-DLC
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.3 ~ 6 | Ball | Aluminum[◎] | 0.45 ~ 24 | 2 | DLC | 60 ~ 120 | 3 ~ 60 | 4 ~ 12 |
NS TOOL
SSPB220 CBN Super Spiral Ball End Mill
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
0.1 ~ 3 | Ball | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | 0.15 ~ 3.6 | 2 | Non-Coated | 50 ~ 70 | 0.3 ~ 18 | 4 |
WIDIN
R Size(mm) | Type | work material | Blade length (ℓ)(mm) | Number of flutes(sheet) | Coating | Overall Length (L)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) |
---|---|---|---|---|---|---|---|---|
R0.75 ~ R10 | Ball | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | 4 ~ 38 | 2 | TiAlN | 50 ~ 160 | - | 3 ~ 20 |