Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • R Size(mm)
  • Blade length (ℓ)(mm)
    [5–30/1mm jednotek]
  • Number of flutes(sheet)
    • UT Coat, 2-Flute Ball CSEB

        UNION TOOL

        UT Coat, 2-Flute Ball CSEB

        [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        R0.05 ~ R6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.1 ~ 222TiCN50 ~ 110-4 ~ 12
        Cena (bez DPH) od:
        38.11 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • UT COAT 2-Flute Long-Neck Ball CSLEB
        • SLEVA

        UNION TOOL

        UT COAT 2-Flute Long-Neck Ball CSLEB

        [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.08 ~ 4.82TiCN45 ~ 1200.3 ~ 603 ~ 6
        Cena (bez DPH) od:
        45.25 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Long-Neck Ball End Mill (for Deep Ribs) NHB-2
        • Volume Discount

        NS TOOL

        Long-Neck Ball End Mill (for Deep Ribs) NHB-2

        Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.4 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]0.6 ~ 62Non-Coated45 ~ 1206 ~ 504 ~ 6
        Cena (bez DPH) od:
        72.56 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Miniature Ball End Mill NCB-2
        • Volume Discount

        NS TOOL

        Miniature Ball End Mill NCB-2

        Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.2 ~ 0.9BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]0.8 ~ 3.62Non-Coated35-3
        Cena (bez DPH) od:
        77.16 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • X Coated Miniature Ball-End Mill NCB-2X
        • Volume Discount

        NS TOOL

        X Coated Miniature Ball-End Mill NCB-2X

        Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.2 ~ 0.9BallGeneral Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]0.8 ~ 3.62TiCN35-3
        Cena (bez DPH) od:
        87.24 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • X Coated Ball-End Mill NSB-2X
        • Volume Discount

        NS TOOL

        X Coated Ball-End Mill NSB-2X

        Ideal for high-precision 3D processing. A universal type for roughing, semi-finishing and finishing
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]3 ~ 152TiCN60 ~ 110-4 ~ 12
        Cena (bez DPH) od:
        75.32 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Long Ball End Mill NSBL-2
        • Volume Discount

        NS TOOL

        Long Ball End Mill NSBL-2

        The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]302Non-Coated180-12
        Cena (bez DPH) od:
        257.62 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Aluminium Ball-End Mill ALB225
        • Volume Discount

        NS TOOL

        Aluminium Ball-End Mill ALB225

        The unique blade shape suppresses chattering during corner and side machining
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.3 ~ 6BallAluminum[◎] / Resin[○]0.45 ~ 242Non-Coated60 ~ 1203 ~ 604 ~ 12
        Cena (bez DPH) od:
        33.13 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230
        • Volume Discount

        NS TOOL

        MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

        Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2.5 ~ 252TiAlN100 ~ 250-3 ~ 10
        Cena (bez DPH) od:
        123.73 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Diamond Coating, Long-Neck Ball End Mill DCRB230
        • SLEVA
        • Volume Discount

        NS TOOL

        Diamond Coating, Long-Neck Ball End Mill DCRB230

        The unique diamond coating demonstrates high durability when machining graphite, high silicon aluminum alloy, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.2 ~ 3Long-Neck BallAluminum[○] / Resin[○]0.3 ~ 62Dia Coat45 ~ 1201 ~ 604 ~ 6
        Cena (bez DPH) od:
        131.83 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Ball End Mill for Copper Electrode / Aluminium / Plastic DB
        • Volume Discount

        NS TOOL

        Ball End Mill for Copper Electrode / Aluminium / Plastic DB

        Uses a very sharp cutting edge for outstanding nonferrous machining performance
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 3BallAluminum[◎] / Copper[◎] / Resin[◎]2 ~ 122Non-Coated45 ~ 80-4 ~ 6
        Cena (bez DPH) od:
        71.65 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck
        • Volume Discount

        OSG

        Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck

        A long neck ball nose cutter with WXS coating.A corner radius shape that achieves both cutting force and cutting edge rigidity.Peripheral cutting edge and undercutting specifications to suppress chatter vibration.A special edge line prevents interference.Optimum chip groove for excellent chip evacuation.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○]0.75 ~ 4.53For High Hardness (Silicon Group)50 ~ 704 ~ 304 ~ 6
        Cena (bez DPH) od:
        62.70 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Graphite Solid Ball End Mill 2-Flute, Long Type
        • Volume Discount

        EIKOSHA

        Carbide Graphite Solid Ball End Mill 2-Flute, Long Type

        Graphite Electrode Processing Long Hilt
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 15BallAluminum[◎] / Copper[◎] / Graphite[◎]20 ~ 802-120 ~ 250-4 ~ 25
        Cena (bez DPH) od:
        164.16 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Air Hole Ball End Mill 2-Flute, Standard Type
        • Volume Discount

        EIKOSHA

        Carbide Air Hole Ball End Mill 2-Flute, Standard Type

        Graphite Electrode Processing With Air Hole
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        2 ~ 12.5BallGeneral Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]20 ~ 602-70 ~ 180-6 ~ 25
        Cena (bez DPH) od:
        101.87 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Air Hole Ball End Mill 2-Flute, Long Type
        • Volume Discount

        EIKOSHA

        Carbide Air Hole Ball End Mill 2-Flute, Long Type

        Graphite Electrode Processing With Long Air Hole
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        3.25 ~ 12.5BallGeneral Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]40 ~ 802-150 ~ 250-6 ~ 25
        Cena (bez DPH) od:
        194.46 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Air Hole Ball End Mill 4-Flute, Standard Type
        • Volume Discount

        EIKOSHA

        Carbide Air Hole Ball End Mill 4-Flute, Standard Type

        Graphite Electrode Processing With Air Hole
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        2 ~ 12.5BallGeneral Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]20 ~ 604-70 ~ 180-6 ~ 25
        Cena (bez DPH) od:
        112.06 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Air Hole Ball End Mill 4-Flute, Long Type
        • Volume Discount

        EIKOSHA

        Carbide Air Hole Ball End Mill 4-Flute, Long Type

        Graphite Electrode Processing With Long Air Hole
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        3 ~ 12.5BallGeneral Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎]40 ~ 804-150 ~ 250-6 ~ 25
        Cena (bez DPH) od:
        205.76 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Solid Spherical Cutter, 2-Flute
        • Volume Discount

        EIKOSHA

        Carbide Solid Spherical Cutter, 2-Flute

        Copying Back / Curved Surface Deburring
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 10Spherical Ball--2-70 ~ 1004 ~ 424 ~ 16
        Cena (bez DPH) od:
        102.47 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Solid Spherical Cutter, 2-Flute Long Type
        • Volume Discount

        EIKOSHA

        Carbide Solid Spherical Cutter, 2-Flute Long Type

        Copying Back / Curved Surface Deburring Longneck
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        3 ~ 10Spherical Ball--2-100 ~ 13018 ~ 426 ~ 16
        Cena (bez DPH) od:
        168.53 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Solid Spherical Cutter, 4-Flute
        • Volume Discount

        EIKOSHA

        Carbide Solid Spherical Cutter, 4-Flute

        Copying Back / Curved Surface Deburring
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        3 ~ 10Spherical Ball--4-70 ~ 10018 ~ 426 ~ 16
        Cena (bez DPH) od:
        149.29 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Solid Spherical Cutter, 4-Flute Long Type
        • Volume Discount

        EIKOSHA

        Carbide Solid Spherical Cutter, 4-Flute Long Type

        Copying Back / Curved Surface Deburring Longneck
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        3 ~ 10Spherical Ball--4-100 ~ 13018 ~ 426 ~ 16
        Cena (bez DPH) od:
        194.28 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • DLGCALBE, DL-Coated Carbide 2-Flute for Aluminium, Ball Nose
        • Volume Discount

        SANKO MFG

        DLGCALBE, DL-Coated Carbide 2-Flute for Aluminium, Ball Nose

        DLC coating provides excellent abrasion resistance and surface lubricity, preventing weld adhesion. Ideal for machining aluminum.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        8BallAluminum[◎] / Copper[◎]402DLC140-16
        Cena (bez DPH) od:
        487.61 €
        Běžné datum odeslání:
        9 pracovních dnů
        Konfigurovat
      • Small Diameter Ball End Mill, 2-Flute
        • Volume Discount

        ATOM

        Small Diameter Ball End Mill, 2-Flute

        Good surface roughness of the cutting edge realizes high quality finished surface.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 0.475BallGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]0.2 ~ 2.52Non-Coated40-3
        Cena (bez DPH) od:
        77.59 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Standard Ball End Mill, 2-Flute
        • Volume Discount

        ATOM

        Standard Ball End Mill, 2-Flute

        Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 10BallGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]3 ~ 402Non-Coated40 ~ 105-4 ~ 20
        Cena (bez DPH) od:
        65.83 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Standard Ball End Mill, 4-Flute
        • Volume Discount

        ATOM

        Standard Ball End Mill, 4-Flute

        Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 10BallGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]3 ~ 402Non-Coated40 ~ 105-4 ~ 20
        Cena (bez DPH) od:
        75.80 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • SBD2 Ball End Mill, 2-Flute, Non-Coated
        • Volume Discount

        OKAZAKI SEIKO

        SBD2 Ball End Mill, 2-Flute, Non-Coated

        Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 552Non-Coated60 ~ 180-4 ~ 25
        Cena (bez DPH) od:
        61.86 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • SBD2D Ball End Mill, 2-Flute, Pure DLC-Coated
        • Volume Discount

        OKAZAKI SEIKO

        SBD2D Ball End Mill, 2-Flute, Pure DLC-Coated

        The weld prevention effect of the pure DLC coating makes it ideal for copper electrode machining.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 12.5BallAluminum[◎] / Copper[◎]2 ~ 552DLC60 ~ 180-4 ~ 25
        Cena (bez DPH) od:
        104.29 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • SBD2L Long Ball End Mill, 2-Flute, Non-Coated
        • Volume Discount

        OKAZAKI SEIKO

        SBD2L Long Ball End Mill, 2-Flute, Non-Coated

        [Features] A long ball end cutter made of carbide with 2 cutting edges.The deep rib prevents the tool from interfering with deep cuts.The long shank allows milling over a wide area.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 602Non-Coated80 ~ 23014 ~ 216 ~ 25
        Cena (bez DPH) od:
        82.18 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • SBD2LA Long Ball End Mill, 2-Flute, OK Coated
        • Volume Discount

        OKAZAKI SEIKO

        SBD2LA Long Ball End Mill, 2-Flute, OK Coated

        [Features] A carbide long ball end mill with 2 cutting edges.The deep rib shape prevents tool interference when deep cutting.The long shank allows milling in a wide range.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2 ~ 602TiAlN80 ~ 23014 ~ 216 ~ 25
        Cena (bez DPH) od:
        97.43 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated
        • Volume Discount

        OKAZAKI SEIKO

        SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

        Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]2 ~ 602For High Hardness (Silicon Group)80 ~ 23014 ~ 216 ~ 25
        Cena (bez DPH) od:
        97.43 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated
        • Volume Discount

        OKAZAKI SEIKO

        SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

        Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]2 ~ 552TiAlN60 ~ 180-4 ~ 25
        Cena (bez DPH) od:
        22.44 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Solid Ball-End Mill for Graphite GF-SBL Type
        • Volume Discount

        DIJET

        Solid Ball-End Mill for Graphite GF-SBL Type

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 6BallGraphite[◎]10 ~ 552Non-Coated100 ~ 200-4 ~ 12
        Cena (bez DPH) od:
        148.42 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • Solid Ball-End Mill for Graphite GF-SBX Type
        • Volume Discount

        DIJET

        Solid Ball-End Mill for Graphite GF-SBX Type

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 6BallGraphite[◎]20 ~ 1302Non-Coated100 ~ 190-6 ~ 12
        Cena (bez DPH) od:
        164.71 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • Solid Ball-End Mill for Graphite GF-SBR Type
        • Volume Discount

        DIJET

        Solid Ball-End Mill for Graphite GF-SBR Type

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 6BallGraphite[◎]10 ~ 552Non-Coated80 ~ 130-4 ~ 12
        Cena (bez DPH) od:
        107.15 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • Solid Ball End Mill LN-SBEL
        • Volume Discount

        DIJET

        Solid Ball End Mill LN-SBEL

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 15Ball-10 ~ 802Non-Coated100 ~ 200-4 ~ 32
        Cena (bez DPH) od:
        119.43 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • Solid Ball End Mill L S-SBE
        • Volume Discount

        DIJET

        Solid Ball End Mill L S-SBE

        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 15BallGeneral Steel[○] / Quenched and tempered steel[○] / Graphite[○]4 ~ 702Non-Coated140 ~ 250-4 ~ 32
        Cena (bez DPH) od:
        167.50 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • Beam Bore End Mill VN-DBS2 Type

          DIJET

          Beam Bore End Mill VN-DBS2 Type

          Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          2BallAluminum[◎]152Non-Coated80-4
          Cena (bez DPH) od:
          1,858.96 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • One Cut Ball (Slim Shank) DZ-OCUB

            DIJET

            One Cut Ball (Slim Shank) DZ-OCUB

            Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
            Více informací
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]92TiAlN120-5
            Cena (bez DPH) od:
            97.06 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • One Cut Ball 03 DZ03-OCSB

              DIJET

              One Cut Ball 03 DZ03-OCSB

              Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
              Více informací
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]152TiAlN100-10
              Cena (bez DPH) od:
              113.20 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • One Cut Hard End Mill DV-OCSB

                DIJET

                One Cut Hard End Mill DV-OCSB

                Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                3 ~ 5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○]9 ~ 152TiAlN90 ~ 100-6 ~ 10
                Cena (bez DPH) od:
                78.00 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Stainless Steel Unequal Lead End Mill RF100VA 6707
                • Volume Discount

                GUHRING

                Stainless Steel Unequal Lead End Mill RF100VA 6707

                An uneven lead ball end mill ideal for machining stainless steel.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                -Ball-13 ~ 454Other57 ~ 12121 ~ 656 ~ 25
                Cena (bez DPH) od:
                90.46 €
                Běžné datum odeslání:
                8 pracovních dnů
                Konfigurovat
              • Diamond Coated Ball End Mill, 2-Flute, Type-N 6724
                • Volume Discount

                GUHRING

                Diamond Coated Ball End Mill, 2-Flute, Type-N 6724

                Diamond coated endmill suitable for graphite or plastic.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                -Ball--2Dia Coat57 ~ 83-6 ~ 12
                Cena (bez DPH) od:
                125.72 €
                Běžné datum odeslání:
                24 pracovních dnů
                Konfigurovat
              • Diamond Coated Ball End Mill, 4-Flute, Type-N 6725
                • Volume Discount

                GUHRING

                Diamond Coated Ball End Mill, 4-Flute, Type-N 6725

                Diamond coated endmill suitable for graphite or plastic.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                -Ball--4Dia Coat75 ~ 150-3 ~ 12
                Cena (bez DPH) od:
                122.58 €
                Běžné datum odeslání:
                24 pracovních dnů
                Konfigurovat
              • All Purpose Ball End Mill Regular 2-Flute 3679
                • Volume Discount

                GUHRING

                All Purpose Ball End Mill Regular 2-Flute 3679

                Machining is possible with a wide range of materials, from raw materials to hardened materials. Suitable for processing of curved surfaces.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                -Ball--2Other38 ~ 104-3 ~ 20
                Cena (bez DPH) od:
                62.23 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • All Purpose Ball End Mill Regular 4-Flute 3727
                • Volume Discount

                GUHRING

                All Purpose Ball End Mill Regular 4-Flute 3727

                Machining is possible with a wide range of materials, from raw materials to hardened materials. Suitable for processing of curved surfaces.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                -Ball--4Other50 ~ 104-6 ~ 20
                Cena (bez DPH) od:
                78.40 €
                Běžné datum odeslání:
                8 pracovních dnů
                Konfigurovat