Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Coating
  • Long Neck Ball End Mills (Carbide) (Machining Application: Engraving)

      • TSC series carbide long neck ball end mill, 2-flute / long neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide long neck ball end mill, 2-flute / long neck model

        [Features] -Long neck shape suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.07 ~ 82For High Hardness (Silicon Group)40 ~ 1100.2 ~ 603 ~ 8
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

        [Features] -High rigidity, 2 flute type with longitudinal taper-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.15 ~ 5Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.3 ~ 82For High Hardness (Silicon Group)50 ~ 1101.5 ~ 604 ~ 12
        Cena (bez DPH) od:
        33.49 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes

        MISUMI

        TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

        [Features] -High feed, high rigidity 3-spiral taper shape with taper length-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 3Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 63For High Hardness (Silicon Group)50 ~ 1107 ~ 604 ~ 8
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
        • Volume Discount
        • XAL
        • General Steel
        • 2 Flutes

        MISUMI

        XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

        A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.07 ~ 62For General Steels (AlCrN, etc.)50 ~ 1100.2 ~ 603 ~ 6
        Cena (bez DPH) od:
        17.09 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • HM Coated 2-Flute, Long Neck Ball HSLB
        • SLEVA
        • Volume Discount
        • Stock

        UNION TOOL

        HM Coated 2-Flute, Long Neck Ball HSLB

        [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.08 ~ 4.82For High Hardness (Silicon Group)45 ~ 1200.3 ~ 603 ~ 6
        Cena (bez DPH) od:
        28.03 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • TSC series carbide long neck ball end mill, 3-flute / long neck model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes

        MISUMI

        TSC series carbide long neck ball end mill, 3-flute / long neck model

        [Features] -Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 4.82 ~ 3For High Hardness (Silicon Group)50 ~ 1103 ~ 504 ~ 6
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes

        MISUMI

        TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

        [Features] The shape with 3 flutes and short flute length prevents chatter and enables high feed machiningThe tapered neck effectively suppresses chatterMachining of high hardness steel up to 65HRC is possibleThe coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.5 ~ 3Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.8 ~ 4.83For High Hardness (Silicon Group)70 ~ 11020 ~ 504 ~ 8
        Cena (bez DPH) od:
        74.53 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • HSB, HM Coated 2-Flute Ball
        • SLEVA
        • Volume Discount
        • Stock

        UNION TOOL

        HSB, HM Coated 2-Flute Ball

        [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.03 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.06 ~ 222For High Hardness (Silicon Group)50 ~ 110-4 ~ 12
        Cena (bez DPH) od:
        37.04 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • TSC series carbide long neck ball end mill, 4-flute / long neck model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes

        MISUMI

        TSC series carbide long neck ball end mill, 4-flute / long neck model

        [Features] -Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        1 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.6 ~ 64For High Hardness (Silicon Group)50 ~ 704 ~ 304 ~ 6
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
        • Volume Discount
        • DIA
        • Graphite
        • 2 Flutes

        MISUMI

        Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

        Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.2 ~ 3Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]0.6 ~ 7.52Dia Coat50 ~ 1102 ~ 604 ~ 6
        Cena (bez DPH) od:
        87.71 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
        • Volume Discount
        • MR
        • General Steel
        • 2 Flutes
        • S (Short)

        MISUMI

        MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

        High-performance MRC series is available in the industry's largest number of sizes
        Více informací
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]0.07 ~ 62MRC50 ~ 1100.2 ~ 604 ~ 6
        Cena (bez DPH) od:
        20.69 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • SSBL200 CBN Super Speed Long Neck Ball End Mill

          NS TOOL

          SSBL200 CBN Super Speed Long Neck Ball End Mill

          Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 1Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.08 ~ 1.22Non-Coated50 ~ 530.3 ~ 104
          Cena (bez DPH) od:
          160.24 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
          • SLEVA
          • Volume Discount

          NS TOOL

          MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

          Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.07 ~ 62TiAlN45 ~ 1200.3 ~ 504 ~ 6
          Cena (bez DPH) od:
          30.38 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

          A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ~ 5Long-Neck Ball / Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-2For High Hardness (Silicon Group)70 ~ 904 ~ 556 ~ 10
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model
          • Volume Discount
          • CrN
          • Copper
          • 2 Flutes

          MISUMI

          CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

          CrN coated products that are ideal for copper electrode processing are available at affordable prices
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ~ 2Long-Neck BallAluminum[○] / Copper[◎] / Graphite[○] / Resin[○]0.4 ~ 42CrN50 ~ 1102 ~ 404 ~ 6
          Cena (bez DPH) od:
          33.74 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • Long Neck for Copper Work, Ball CURIBR
          • Volume Discount

          NACHI(FUJIKOSHI)

          Long Neck for Copper Work, Ball CURIBR

          Well suited for detailed machining on copper electrodes. A variety of size alignment allows for multiple types of machining.
          Více informací
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ~ 1.5Long-Neck BallAluminum[◎] / Copper[◎]0.4 ~ 2.52CrN45 ~ 801.5 ~ 354 ~ 6
          Cena (bez DPH) od:
          86.20 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • 2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD

            OSG

            2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD

            Ideal for copper electrode machining if large overhang is required due to short blade with high rigidity and long neck shape.
            Více informací
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 2.5Long-Neck BallAluminum[○] / Copper[◎] / Resin[○]1.5 ~ 7.52CrN60 ~ 903 ~ 406
            Cena (bez DPH) od:
            84.00 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Long Neck Ball End for 2-Flute Graphite
            • Volume Discount

            OSG

            Long Neck Ball End for 2-Flute Graphite

            Diamond Coating End-mill for Graphite Processing
            Více informací
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ~ 2Long-Neck BallAluminum[○] / Graphite[◎] / Resin[◎]0.6 ~ 62DG50 ~ 1004 ~ 604
            Cena (bez DPH) od:
            107.25 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • 2-Flute Long Neck, Ball End CBN-LN-SXB

              OSG

              2-Flute Long Neck, Ball End CBN-LN-SXB

              2-Flute Long Neck Ball End Type CBN-LN-SXB-Achieves deep cut milling even with small diameters. Good cutting quality.With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.-CBN sintered body is used for flute material.
              Více informací
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.2 ~ 1.5Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ~ 1.82Non-Coated45 ~ 502 ~ 154 ~ 6
              Cena (bez DPH) od:
              110.50 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • 2-Flute Long Neck, Ball End CRN-LN-EBD-4
              • Volume Discount

              OSG

              2-Flute Long Neck, Ball End CRN-LN-EBD-4

              In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
              Více informací
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.1 ~ 1Long-Neck BallAluminum[○] / Copper[◎] / Resin[○]0.16 ~ 1.62CrN45 ~ 701 ~ 304
              Cena (bez DPH) od:
              64.79 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • 2-Flute Long Neck, Ball End DLC-LN-EBD
              • Volume Discount

              OSG

              2-Flute Long Neck, Ball End DLC-LN-EBD

              Ultra-smooth DLC coating prevents welding. It is possible to achieve high-speed in the shape processing such as aluminum alloy, and good surface finishing can also be obtained.
              Více informací
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ~ 2Long-Neck BallAluminum[◎] / Resin[◎]1.5 ~ 62DLC60 ~ 805 ~ 206
              Cena (bez DPH) od:
              82.63 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • 2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                OSG

                2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.3 ~ 1.5Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.5 ~ 2.42For General Steels (AlCrN, etc.)35 ~ 401.5 ~ 124
                Cena (bez DPH) od:
                20.02 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • 2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6
                • Volume Discount

                OSG

                2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

                High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.25 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.5 ~ 62TiAlN60 ~ 902.5 ~ 306
                Cena (bez DPH) od:
                88.82 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • 2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD
                • SLEVA
                • Volume Discount

                OSG

                2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

                Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.1 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]0.16 ~ 4.82For High Hardness (Silicon Group)45 ~ 900.5 ~ 404 ~ 6
                Cena (bez DPH) od:
                57.40 €
                Speciální cena
                Běžné datum odeslání:
                Skladová položka: 1 pracovní den
                Některé položky lze dodat ve stejný den
                Konfigurovat
              • 2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
                • SLEVA
                • Volume Discount

                OSG

                2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

                Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.
                Více informací
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.08 ~ 62For General Steels (AlCrN, etc.)45 ~ 1200.3 ~ 503 ~ 6
                Cena (bez DPH) od:
                49.20 €
                Speciální cena
                Běžné datum odeslání:
                Skladová položka: 1 pracovní den
                Některé položky lze dodat ve stejný den
                Konfigurovat
              • 2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                  OSG

                  2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                  Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.
                  Více informací
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.1 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.16 ~ 4.82TiAlN45 ~ 1200.5 ~ 504 ~ 6
                  Cena (bez DPH) od:
                  35.60 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM

                    OSG

                    Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM

                    Diamond Coating End-mill for Graphite Processing
                    Více informací
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    1 ~ 1.5Long-Neck BallAluminum[◎] / Graphite[◎] / Resin[◎]3 ~ 4.54DG50 ~ 6010 ~ 204
                    Cena (bez DPH) od:
                    107.25 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD

                      OSG

                      DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD

                      Ball end mill of the long neck shape that has been subjected to ultra-fine crystal diamond coating. Outstanding endurance in the graphite processing. Copper, is also effective in the aluminum alloy.
                      Více informací
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ~ 2.5Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]1.5 ~ 7.52Dia Coat60 ~ 1005 ~ 506
                      Cena (bez DPH) od:
                      156.54 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
                      • Volume Discount

                      UNION TOOL

                      HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

                      [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
                      Více informací
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.1 ~ 0.75BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.3 ~ 2.52For High Hardness (Silicon Group)50-4
                      Cena (bez DPH) od:
                      43.34 €
                      Běžné datum odeslání:
                      8 pracovních dnů
                      Konfigurovat
                    • HBL, HM Coated 2-Flute Long Shank Ball

                        UNION TOOL

                        HBL, HM Coated 2-Flute Long Shank Ball

                        [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
                        Více informací
                        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                        1.5 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]4.5 ~ 252For High Hardness (Silicon Group)80 ~ 200-3 ~ 12
                        Cena (bez DPH) od:
                        110.99 €
                        Běžné datum odeslání:
                        8 pracovních dnů
                        Konfigurovat
                      • HLB, HM Coated 2-Flute Long Neck Ball

                          UNION TOOL

                          HLB, HM Coated 2-Flute Long Neck Ball

                          [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
                          Více informací
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.4 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.64 ~ 4.82For High Hardness (Silicon Group)45 ~ 803 ~ 304 ~ 6
                          Cena (bez DPH) od:
                          48.19 €
                          Běžné datum odeslání:
                          7 pracovních dnů
                          Konfigurovat
                        • HTNB HM Coated High-Precision Taper Neck Ball
                          • SLEVA

                          UNION TOOL

                          HTNB HM Coated High-Precision Taper Neck Ball

                          [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
                          Více informací
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.1 ~ 2Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.16 ~ 3.22For High Hardness (Silicon Group)50 ~ 1201.5 ~ 624 ~ 6
                          Cena (bez DPH) od:
                          69.30 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                            UNION TOOL

                            DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                            [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                            Více informací
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.5 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]5 ~ 552Dia Coat60 ~ 180-4 ~ 12
                            Cena (bez DPH) od:
                            277.34 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
                            • SLEVA

                            UNION TOOL

                            DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing

                            [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                            Více informací
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.2 ~ 3Long-Neck BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.32 ~ 62Dia Coat45 ~ 1202 ~ 804 ~ 6
                            Cena (bez DPH) od:
                            105.36 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • CGB2000 2-Flute Ball for Graphite Processing

                              UNION TOOL

                              CGB2000 2-Flute Ball for Graphite Processing

                              [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
                              Více informací
                              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                              0.2 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.8 ~ 552Non-Coated60 ~ 200-4 ~ 12
                              Cena (bez DPH) od:
                              115.16 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • CGB4000 4-Flute Ball for Graphite Processing

                                UNION TOOL

                                CGB4000 4-Flute Ball for Graphite Processing

                                [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
                                Více informací
                                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                2 ~ 10BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]20 ~ 604Non-Coated100 ~ 250-4 ~ 20
                                Cena (bez DPH) od:
                                228.98 €
                                Běžné datum odeslání:
                                7 pracovních dnů
                                Konfigurovat
                              • CPRB for Resin Processing, 2-Flute Long Neck Ball

                                  UNION TOOL

                                  CPRB for Resin Processing, 2-Flute Long Neck Ball

                                  [Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
                                  Více informací
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.2 ~ 3Long-Neck BallAluminum[○] / Copper[◎] / Resin[◎]0.4 ~ 62Non-Coated45 ~ 1201 ~ 504 ~ 6
                                  Cena (bez DPH) od:
                                  72.74 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • MRBH230 Long-Neck Ball, Hard (for High Hardness)
                                  • SLEVA
                                  • Volume Discount
                                  • Stock

                                  NS TOOL

                                  MRBH230 Long-Neck Ball, Hard (for High Hardness)

                                  The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
                                  Více informací
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.07 ~ 62For High Hardness (Silicon Group)45 ~ 1200.2 ~ 504 ~ 6
                                  Cena (bez DPH) od:
                                  31.29 €
                                  Speciální cena
                                  Běžné datum odeslání:
                                  Skladová položka: 1 pracovní den
                                  Některé položky lze dodat ve stejný den
                                  Konfigurovat
                                • DHB Long Neck Ball End Mill for Copper Electrode / Aluminium / Plastic (for Deep Rib)
                                  • Volume Discount

                                  NS TOOL

                                  DHB Long Neck Ball End Mill for Copper Electrode / Aluminium / Plastic (for Deep Rib)

                                  [Features] Long shank cutter with 2 cutting edges.[Features] Suitable for machining aluminium alloys, copper and resins.
                                  Více informací
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.5 ~ 3Long-Neck BallAluminum[◎] / Copper[◎] / Resin[◎]1.5 ~ 92Non-Coated50 ~ 1104 ~ 504 ~ 8
                                  Cena (bez DPH) od:
                                  91.81 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
                                  • SLEVA
                                  • Volume Discount

                                  NS TOOL

                                  MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

                                  Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
                                  Více informací
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.1 ~ 1.5Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ~ 2.52TiAlN35 ~ 500.5 ~ 204
                                  Cena (bez DPH) od:
                                  34.97 €
                                  Speciální cena
                                  Běžné datum odeslání:
                                  Skladová položka: 1 pracovní den
                                  Některé položky lze dodat ve stejný den
                                  Konfigurovat
                                • UT Coat, 2-Flute Ball CSEB

                                    UNION TOOL

                                    UT Coat, 2-Flute Ball CSEB

                                    [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
                                    Více informací
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.3 ~ 182TiCN50 ~ 110-4 ~ 12
                                    Cena (bez DPH) od:
                                    38.11 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • UT COAT 2-Flute Long-Neck Ball CSLEB
                                    • SLEVA

                                    UNION TOOL

                                    UT COAT 2-Flute Long-Neck Ball CSLEB

                                    [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
                                    Více informací
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.08 ~ 4.82TiCN45 ~ 1200.3 ~ 603 ~ 6
                                    Cena (bez DPH) od:
                                    45.25 €
                                    Speciální cena
                                    Běžné datum odeslání:
                                    Skladová položka: 1 pracovní den
                                    Některé položky lze dodat ve stejný den
                                    Konfigurovat
                                  • Long-Neck Ball End Mill (for Deep Ribs) NHB-2
                                    • Volume Discount

                                    NS TOOL

                                    Long-Neck Ball End Mill (for Deep Ribs) NHB-2

                                    Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing
                                    Více informací
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.4 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]0.6 ~ 62Non-Coated45 ~ 1206 ~ 504 ~ 6
                                    Cena (bez DPH) od:
                                    72.56 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Diamond Coating, Long-Neck Ball End Mill DCRB230
                                    • SLEVA
                                    • Volume Discount

                                    NS TOOL

                                    Diamond Coating, Long-Neck Ball End Mill DCRB230

                                    The unique diamond coating demonstrates high durability when machining graphite, high silicon aluminum alloy, etc.
                                    Více informací
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.2 ~ 3Long-Neck BallAluminum[○] / Resin[○]0.3 ~ 62Dia Coat45 ~ 1201 ~ 604 ~ 6
                                    Cena (bez DPH) od:
                                    131.83 €
                                    Speciální cena
                                    Běžné datum odeslání:
                                    Skladová položka: 1 pracovní den
                                    Některé položky lze dodat ve stejný den
                                    Konfigurovat
                                  • Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck
                                    • Volume Discount

                                    OSG

                                    Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck

                                    A long neck ball nose cutter with WXS coating.A corner radius shape that achieves both cutting force and cutting edge rigidity.Peripheral cutting edge and undercutting specifications to suppress chatter vibration.A special edge line prevents interference.Optimum chip groove for excellent chip evacuation.
                                    Více informací
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.5 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○]0.75 ~ 4.53For High Hardness (Silicon Group)50 ~ 704 ~ 304 ~ 6
                                    Cena (bez DPH) od:
                                    62.70 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat