Carbide Ball End Mills (Coating: Non-Coated)

• 

  Ball End Mills (Carbide) (45)

• 

  Long Neck Ball End Mills (Carbide) (11)

• 

  VAN_HOORN

  MCD Diamond Tip Ball 2 Flutes

  [Features]· The cutting edge is a diamond tip. The tool service life is 2 to 5 times that of PCD and 10 to 20 times that of diamond coated.· Ideal for machining graphite and composite materials such as CFRP, etc. Provides a beautiful aluminum finish too.· European-made high quality for peace of mind.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  6	Ball	Aluminum[◎] / Graphite[◎] / Resin[○]	12	2	Non-Coated	78	30	12

  Běžná cena (bez DPH):

  1,213.84 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  NS TOOL

  SSBL200 CBN Super Speed Long Neck Ball End Mill

  Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.05 ～ 1	Long-Neck Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.08 ～ 1.2	2	Non-Coated	50 ～ 53	0.3 ～ 10	4

  Běžná cena (bez DPH):

  166.68 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • Non-Coated
  • General Steel
  • 2 Flutes
  • S (Short)

  MISUMI

  Carbide ball end mill, 2-flute / short model

  Highly versatile due to the non-coated specification

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 10	Ball	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	0.8 ～ 25	2	Non-Coated	40 ～ 150	-	3 ～ 20

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 2 Flutes
  • S (Short)

  MISUMI

  Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

  A type for aluminum that achieves high efficiency while having the affordable uncoated design

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 6	Ball	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	1.5 ～ 18	2	Non-Coated	50 ～ 110	14 ～ 68	4 ～ 12

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • Non-Coated
  • Graphite
  • 2 Flutes
  • L (Long)

  MISUMI

  Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

  The price of the non-coated product with excellent cost performance has been further reduced

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	10 ～ 55	2	Non-Coated	100 ～ 200	20 ～ 65	4 ～ 12

  Běžná cena (bez DPH):

  77.02 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • Non-Coated
  • Resin
  • 2 Flutes
  • S (Short)

  MISUMI

  Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

  Sharp edge that's suitable for machining resin

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 6	Ball	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	1.5 ～ 18	2	Non-Coated	50 ～ 120	-	4 ～ 12

  Běžná cena (bez DPH):

  30.26 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount
  • High-Hardness Steel
  • 2 Flutes

  MISUMI

  CBN Ball End Mill, 2-Flute

  CBN ball end mill that's ideal for precision finishing is available at a value price

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.3 ～ 1	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.5 ～ 1.2	2	Non-Coated	50	1.5 ～ 5	4

  Běžná cena (bez DPH):

  138.36 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  OSG

  2-Flute, Ball End, Miniature, MG-EBD-3

  Shank diameter (mm) 3, total length (mm) 40, helix angle: standard helix (30 to 44°).

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.05 ～ 1.5	Ball	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	0.2 ～ 8	2	Non-Coated	40	-	3

  Běžná cena (bez DPH):

  64.79 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  2-Flute, Ball End, CBN-EBD

  2-Flute Ball End Type CBN-EBD-Demonstrates high performance when machining high strength materials and cast iron-The wide selection of CBN tools allows you to choose the best tool for your application.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  3 ～ 6	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○]	4 ～ 7	2	Non-Coated	90 ～ 110	20	6 ～ 12

  Běžná cena (bez DPH):

  235.08 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  2-Flute, Ball End, CBN-SXB

  Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 1.5	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 1.8	2	Non-Coated	45 ～ 50	1.2 ～ 6	4 ～ 6

  Běžná cena (bez DPH):

  125.12 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  2-Flute, Ball End, MG-EBD

  Achieves long tool life at medium low speed by adopting the high toughness cemented carbide

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  6.5 ～ 12.5	Ball	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	26 ～ 50	2	Non-Coated	110 ～ 180	-	12 ～ 25

  Běžná cena (bez DPH):

  232.16 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  2-Flute, for Plus Check, Ball End CAP-EBD

  Ball end mill for copper, aluminum alloy, and plastic. Good cutting properties and expels debris well.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 5	Ball	Aluminum[◎] / Copper[◎] / Resin[○]	2.5 ～ 18	2	Non-Coated	60 ～ 125	-	4 ～ 10

  Běžná cena (bez DPH):

  88.10 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL

  Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	20 ～ 130	2	Non-Coated	100 ～ 200	25 ～ 80	6 ～ 12

  Běžná cena (bez DPH):

  132.60 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  For Graphite, 2 Flutes, Ball End Type, GF-EBDR

  Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	10 ～ 65	2	Non-Coated	75 ～ 130	20 ～ 85	4 ～ 12

  Běžná cena (bez DPH):

  108.56 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  For Graphite, 2 Flutes, Long Shank, Ball End Type, GF-LS-EBDR

  Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	10 ～ 65	2	Non-Coated	100 ～ 200	25 ～ 130	4 ～ 12

  Běžná cena (bez DPH):

  125.73 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  2-Flute Long Neck, Ball End CBN-LN-SXB

  2-Flute Long Neck Ball End Type CBN-LN-SXB-Achieves deep cut milling even with small diameters. Good cutting quality.With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.-CBN sintered body is used for flute material.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 1.5	Long-Neck Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 1.8	2	Non-Coated	45 ～ 50	2 ～ 15	4 ～ 6

  Běžná cena (bez DPH):

  110.50 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  UNION TOOL

  CGB2000 2-Flute Ball for Graphite Processing

  [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 6	Ball	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	0.8 ～ 55	2	Non-Coated	60 ～ 200	-	4 ～ 12

  Běžná cena (bez DPH):

  115.16 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  UNION TOOL

  CGB4000 4-Flute Ball for Graphite Processing

  [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  2 ～ 10	Ball	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	20 ～ 60	4	Non-Coated	100 ～ 250	-	4 ～ 20

  Běžná cena (bez DPH):

  228.98 €～

  Běžné datum odeslání:

  7 pracovních dnů

  Konfigurovat
• 

  UNION TOOL

  CPRB for Resin Processing, 2-Flute Long Neck Ball

  [Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 3	Long-Neck Ball	Aluminum[○] / Copper[◎] / Resin[◎]	0.4 ～ 6	2	Non-Coated	45 ～ 120	1 ～ 50	4 ～ 6

  Běžná cena (bez DPH):

  72.74 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  NS TOOL

  SSB200 CBN Super Speed Ball End Mill

  High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.1 ～ 1	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.15 ～ 1.2	2	Non-Coated	52 ～ 53	0.3 ～ 5	4

  Běžná cena (bez DPH):

  160.01 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  NS TOOL

  SFB200 CBN Super Finish Ball End Mill

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.1 ～ 1	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.15 ～ 1.2	2	Non-Coated	50 ～ 52	0.5 ～ 5	4

  Běžná cena (bez DPH):

  200.00 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  RSB230 Ball-End Mill for Resin Clear Cut

  3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.1 ～ 3	Long-Neck Ball	Aluminum[◎] / Copper[◎] / Resin[◎]	0.6 ～ 30	2	Non-Coated	50 ～ 130	2 ～ 80	3 ～ 6

  Běžná cena (bez DPH):

  42.09 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  NS TOOL

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.01 ～ 0.05	Ball	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○]	0.02 ～ 0.1	1	Non-Coated	50	-	4

  Běžná cena (bez DPH):

  239.99 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  NS TOOL

  NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

  World's smallest ball end mill "Micro Ball" extends the microfabrication area

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.005 ～ 0.05	Ball	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.01 ～ 0.1	1	Non-Coated	45	-	4

  Běžná cena (bez DPH):

  76.47 €～

  Běžná cena (bez DPH):

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)

  [Features] Long shank cutter with 2 cutting edges.[Features] Suitable for machining aluminium alloys, copper and resins.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 3	Long-Neck Ball	Aluminum[◎] / Copper[◎] / Resin[◎]	1.5 ～ 9	2	Non-Coated	50 ～ 110	4 ～ 50	4 ～ 8

  Běžná cena (bez DPH):

  95.50 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  Long-Neck Ball End Mill (for Deep Ribs) NHB-2

  Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.4 ～ 3	Long-Neck Ball	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.6 ～ 6	2	Non-Coated	45 ～ 120	6 ～ 50	4 ～ 6

  Běžná cena (bez DPH):

  75.47 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  Miniature Ball End Mill NCB-2

  Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.2 ～ 0.9	Ball	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.8 ～ 3.6	2	Non-Coated	35	-	3

  Běžná cena (bez DPH):

  80.25 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  Long Ball End Mill NSBL-2

  The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  6	Ball	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	30	2	Non-Coated	180	-	12

  Běžná cena (bez DPH):

  267.97 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  Aluminum Ball-End Mill ALB225

  The unique blade shape suppresses chattering during corner and side machining

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.3 ～ 6	Ball	Aluminum[◎] / Resin[○]	0.45 ～ 24	2	Non-Coated	60 ～ 120	3 ～ 60	4 ～ 12

  Běžná cena (bez DPH):

  34.47 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  NS TOOL

  Ball End Mill for Copper Electrode / Aluminum / Plastic DB

  Uses a very sharp cutting edge for outstanding nonferrous machining performance

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 3	Ball	Aluminum[◎] / Copper[◎] / Resin[◎]	2 ～ 12	2	Non-Coated	45 ～ 80	-	4 ～ 6

  Běžná cena (bez DPH):

  74.53 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ATOM

  Small Diameter Ball End Mill, 2-Flute

  Good surface roughness of the cutting edge realizes high quality finished surface.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.05 ～ 0.475	Ball	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	0.2 ～ 2.5	2	Non-Coated	40	-	3

  Běžná cena (bez DPH):

  80.70 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ATOM

  Standard Ball End Mill, 2-Flute

  Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 10	Ball	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	3 ～ 40	2	Non-Coated	40 ～ 105	-	4 ～ 20

  Běžná cena (bez DPH):

  68.47 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ATOM

  Standard Ball End Mill, 4-Flute

  Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 10	Ball	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	3 ～ 40	2	Non-Coated	40 ～ 105	-	4 ～ 20

  Běžná cena (bez DPH):

  78.85 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ASAHI TOOLS

  BEM2 Ball End Mill G2

  Up to R4.5 specification products (solid tip) have a torsional shape on the rounded section as well, resulting in corners with improved profiling efficiency, which are ideal for rounding.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  2 ～ 20	Ball	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	9 ～ 80	2	Non-Coated	100 ～ 220	-	10 ～ 32

  Běžná cena (bez DPH):

  140.39 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  ASAHI TOOLS

  BEM2 Long Shank Ball End Mill G2

  2-flute ball end mill long shank type. Ideal for rounding corners.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  5 ～ 15	Ball	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	30 ～ 60	2	Non-Coated	130 ～ 240	-	12 ～ 32

  Běžná cena (bez DPH):

  187.46 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OKAZAKI SEIKO

  SBD2 Ball End Mill, 2-Flute, Non-Coated

  Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 12.5	Ball	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 55	2	Non-Coated	60 ～ 180	-	4 ～ 25

  Běžná cena (bez DPH):

  64.35 €～

  Běžné datum odeslání:

  10 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OKAZAKI SEIKO

  SBD2L Long Ball End Mill, 2-Flute, Non-Coated

  [Features] A long ball end cutter made of carbide with 2 cutting edges.The deep rib prevents the tool from interfering with deep cuts.The long shank allows milling over a wide area.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 12.5	Ball	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 60	2	Non-Coated	80 ～ 230	14 ～ 21	6 ～ 25

  Běžná cena (bez DPH):

  85.50 €～

  Běžné datum odeslání:

  10 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball-End Mill for Graphite GF-SBL Type

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	10 ～ 55	2	Non-Coated	100 ～ 200	-	4 ～ 12

  Běžná cena (bez DPH):

  148.42 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball-End Mill for Graphite GF-SBX Type

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	20 ～ 130	2	Non-Coated	100 ～ 190	-	6 ～ 12

  Běžná cena (bez DPH):

  164.71 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball-End Mill for Graphite GF-SBR Type

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 6	Ball	Graphite[◎]	10 ～ 55	2	Non-Coated	80 ～ 130	-	4 ～ 12

  Běžná cena (bez DPH):

  107.15 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball End Mill ESL-SBE

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  3 ～ 12.5	Ball	-	40 ～ 100	2	Non-Coated	250 ～ 350	-	6 ～ 25

  Běžná cena (bez DPH):

  378.54 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball End Mill LN-SBEL

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 15	Ball	-	10 ～ 80	2	Non-Coated	100 ～ 200	-	4 ～ 32

  Běžná cena (bez DPH):

  119.43 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball End Mill SBEL

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  0.5 ～ 15	Ball	General Steel[○] / Quenched and tempered steel[○] / Graphite[○]	5 ～ 80	2	Non-Coated	45 ～ 150	-	4 ～ 32

  Běžná cena (bez DPH):

  107.03 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  DIJET

  Solid Ball End Mill L S-SBE

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  1 ～ 15	Ball	General Steel[○] / Quenched and tempered steel[○] / Graphite[○]	4 ～ 70	2	Non-Coated	140 ～ 250	-	4 ～ 32

  Běžná cena (bez DPH):

  167.50 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  DIJET

  Beam Bore End Mill VN-DBS2 Type

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Více informací

  R Size(mm)	Type	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)
  2	Ball	Aluminum[◎]	15	2	Non-Coated	80	-	4

  Běžná cena (bez DPH):

  1,858.96 €

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat