Registrace

Překládáme náš obchod do češtiny! 

Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Kategorie
Podmínky filtrování

Vymazat vše

Radius End Mills (Carbide)

    143 položek
    * Informace o dnech dodání, přepravních nákladech a cenách
    Seznam
    Fotografie
    Porovnat specifikace
  • 1
  • 2
  • 3
  • 4
  • Další
    • TSC series carbide radius end mill, 2-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 2-flute / regular model

      [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

      [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 563Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 2-flute / short model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute / regular model

      [Features] -Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 364Radius45 ～ 854 ～ 1223 ～ 55
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 2-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide radius end mill, 2-flute / short model

      Radius end mills are available at low prices
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3 ～ 302Radius50 ～ 754 ～ 12-
      Cena (bez DPH) od:
      14.52 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

      4-Flute Radius for High-Efficiency and High-Speed Machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ～ 120.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]18 ～ 384Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute, 45°, regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide radius end mill, 4-flute, 45°, regular model

      [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 564Radius60 ～ 1306 ～ 2026 ～ 92
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
      • Volume Discount
      • XAL
      • General Steel
      • 3 Flutes

      MISUMI

      XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

      3-flute 45° helix radius that's resistant to chattering is available at an affordable price
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]16 ～ 383Radius60 ～ 1006 ～ 12-
      Cena (bez DPH) od:
      23.73 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL series carbide radius end mill, 4-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 4 Flutes

      MISUMI

      XAL series carbide radius end mill, 4-flute / short model

      The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]8 ～ 384Radius50 ～ 1004 ～ 20-
      Cena (bez DPH) od:
      18.89 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

      [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      3 ～ 120.3 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 263Radius60 ～ 1006 ～ 1218 ～ 70
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TSC series carbide radius end mill, 4-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide radius end mill, 4-flute / stub model

      [Features] -Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 184Radius40 ～ 754 ～ 1214 ～ 45
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
      • Volume Discount

      MISUMI

      XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

      Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]4 ～ 454Radius50 ～ 1104 ～ 20-
      Cena (bez DPH) od:
      17.06 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • VAC Series Carbide 2-Flute Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Radius End Mill

      [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ～ 302Radius50 ～ 1306 ～ 12-
      Cena (bez DPH) od:
      49.28 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • HYP-HS-CRE , Carbide end mill

        OSG

        HYP-HS-CRE , Carbide end mill

        Carbide end mill - For hard materials and cast iron - 4 flutes, super radius
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        ---------
        Cena (bez DPH) od:
        71.70 €
        Běžné datum odeslání:
        4 pracovních dnů
        Konfigurovat
      • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 4 Flutes
        • S (Short)

        MISUMI

        TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

        [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 200.813 ～ 2.607General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 404High-Feed Radius50 ～ 1506 ～ 20-
        Cena (bez DPH) od:
        116.38 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

        [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
        Cena (bez DPH) od:
        93.37 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

        [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ～ 123High-Feed Radius50 ～ 1004 ～ 12-
        Cena (bez DPH) od:
        87.94 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

        [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.5 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius60 ～ 1006 ～ 1214 ～ 68
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

        [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.5 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 184Radius60 ～ 1006 ～ 1214 ～ 68
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide radius end mill, 4-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, 4-flute, 45° spiral / short model

        [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 200.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 384Radius60 ～ 1106 ～ 2018 ～ 73
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide radius end mill, 4-flute / short model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, 4-flute / short model

        [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 244Radius40 ～ 754 ～ 1217 ～ 45
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

        [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.2 ～ 30.05 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.16 ～ 62Tapered neck radius40 ～ 1004 ～ 61 ～ 60
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
        • Non-Coated
        • General Steel

        MISUMI

        Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

        [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ～ 602 ～ 4Radius40 ～ 1254 ～ 20-
        Běžné datum odeslání:
        7 pracovních dnů
        Konfigurovat
      • VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
        • Volume Discount

        MISUMI

        VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

        [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1.5 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]4 ～ 304Radius50 ～ 1506 ～ 12-
        Cena (bez DPH) od:
        49.28 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Square End Mill, Regular, 4-Flute Corner R 3562
        • Volume Discount

        GUHRING

        Square End Mill, Regular, 4-Flute Corner R 3562

        [Features]· Ideal for corner rounding of molds and machine parts.
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        6 ～ 20---4Radius57 ～ 1046 ～ 20-
        Cena (bez DPH) od:
        84.67 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

          KYOWA SEIKO

          PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

          [Specifications]· Shape: Radius End Mill (carbide)· Material: PCD Polycrystalline Diamond· Work materials: For carbide alloy machining[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          0.5 ～ 2--0.5 ～ 1.52Radius504-
          Cena (bez DPH) od:
          671.80 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
          • Volume Discount

          SANDVIK

          CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

          [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          -0.5 ～ 2General Steel[○] / Cast Iron[○]-4Radius57 ～ 726 ～ 12-
          Cena (bez DPH) od:
          111.93 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • EPL-HI-CR-EMS, Carbide end mill

            OSG

            EPL-HI-CR-EMS, Carbide end mill

            Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius
            Více informací
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            ---------
            Cena (bez DPH) od:
            46.60 €
            Běžné datum odeslání:
            4 pracovních dnů
            Konfigurovat
          • EPL-HI-CR-WEMS, Carbide end mill

              OSG

              EPL-HI-CR-WEMS, Carbide end mill

              Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              ---------
              Cena (bez DPH) od:
              46.60 €
              Běžné datum odeslání:
              4 pracovních dnů
              Konfigurovat
            • EPL-HP-4FL, Carbide end mill

                OSG

                EPL-HP-4FL, Carbide end mill

                Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                ---------
                Cena (bez DPH) od:
                42.20 €
                Běžné datum odeslání:
                4 pracovních dnů
                Konfigurovat
              • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 3 Flutes
                • S (Short)

                MISUMI

                TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius50 ～ 1006 ～ 12-
                Cena (bez DPH) od:
                122.52 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 244High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
                Cena (bez DPH) od:
                96.97 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 4-flute / stub model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill, 4-flute / stub model

                A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 60.2 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 94Radius506-
                Cena (bez DPH) od:
                59.74 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 3 Flutes
                • S (Short)

                MISUMI

                TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ～ 243High-Feed Radius50 ～ 1004 ～ 12-
                Cena (bez DPH) od:
                83.28 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 4 Flutes

                MISUMI

                TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                3 ～ 120.75 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]1.2 ～ 54High-Feed Radius60 ～ 1106 ～ 127.5 ～ 24
                Cena (bez DPH) od:
                64.07 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ～ 124High-Feed Radius50 ～ 1004 ～ 12-
                Cena (bez DPH) od:
                56.61 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 200.5 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ～ 404High-Feed Radius50 ～ 1304 ～ 20-
                Cena (bez DPH) od:
                77.71 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                Long neck type with interference prevention can be selected from a number of effective lengths
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                4 ～ 161 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]6 ～ 244Long-Neck Radius70 ～ 1804 ～ 16-
                Cena (bez DPH) od:
                92.43 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
                • Volume Discount
                • TS
                • General Steel
                • 3 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                3 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius40 ～ 656 ～ 12-
                Cena (bez DPH) od:
                76.51 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                3 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 184Radius40 ～ 656 ～ 12-
                Cena (bez DPH) od:
                82.35 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                3 ～ 220.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 304Radius80 ～ 2006 ～ 2010 ～ 18
                Cena (bez DPH) od:
                76.72 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 2-flute stub model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill, 2-flute stub model

                [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 182Radius35 ～ 604 ～ 12-
                Cena (bez DPH) od:
                34.89 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 4-flute / stub model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill, 4-flute / stub model

                [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink holder-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 184Radius35 ～ 604 ～ 12-
                Cena (bez DPH) od:
                45.06 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
                • Volume Discount
                • TS
                • High-Hardness Steel
                • 3 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

                By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                3 ～ 120.8 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4.5 ～ 183Tapered neck radius80 ～ 1606 ～ 1624 ～ 105
                Cena (bez DPH) od:
                87.20 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
            • 1
            • 2
            • 3
            • 4
            • Další

              • Nedávno zobrazené produkty

              Kategorie související s Radius End Mills (Carbide)