Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1–3/0.1mm jednotek]
  • work material
  • Blade length (ℓ)(mm)
    [5–56/1mm jednotek]
  • Number of flutes(sheet)
  • Type

Radius End Mills (Carbide) (Machining Application: Groove Stránka 2)

    • SCD2 End Mill with Corner R, 2-Flute, Non-Coated
      • Volume Discount

      OKAZAKI SEIKO

      SCD2 End Mill with Corner R, 2-Flute, Non-Coated

      The adoption of a long shank allows for corner rounding in deep sections.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ~ 120.2 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]12 ~ 362Radius70 ~ 1106 ~ 12-
      Cena (bez DPH) od:
      74.06 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SCD2A End Mill with Corner R, 2-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SCD2A End Mill with Corner R, 2-Flute, OK Coated

      The adoption of a long shank allows for corner rounding in deep sections.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ~ 120.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]12 ~ 362Radius70 ~ 1106 ~ 12-
      Cena (bez DPH) od:
      96.42 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
      • Volume Discount

      OKAZAKI SEIKO

      SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

      A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ~ 120.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]8 ~ 244Radius70 ~ 1106 ~ 1215 ~ 42
      Cena (bez DPH) od:
      96.42 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated
      • Volume Discount

      OKAZAKI SEIKO

      SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

      Multi-function type radius end mill capable of high speed machining of high hardness materials up to 65 HRC due to the effects of OK hard coating.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      4 ~ 120.5 ~ 2General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]8 ~ 244Radius70 ~ 1106 ~ 1215 ~ 42
      Cena (bez DPH) od:
      96.42 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • Solid End Mill for Aluminium Machining AL-SEES3-LS-R Type
      • Volume Discount

      DIJET

      Solid End Mill for Aluminium Machining AL-SEES3-LS-R Type

      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      6 ~ 220.4 ~ 5Aluminum[◎] / Copper[○]9 ~ 333Radius80 ~ 2005.8 ~ 20-
      Cena (bez DPH) od:
      132.92 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • Solid End Mill for Aluminium Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type
      • Volume Discount

      DIJET

      Solid End Mill for Aluminium Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      6 ~ 200.4 ~ 3.2Aluminum[◎] / Copper[○]17 ~ 452Radius55 ~ 1156 ~ 20-
      Cena (bez DPH) od:
      117.53 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • Solid End Mill for Aluminium Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type
      • Volume Discount

      DIJET

      Solid End Mill for Aluminium Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      8 ~ 200.5 ~ 4Aluminum[◎] / Copper[○]12 ~ 333Radius70 ~ 1208 ~ 20-
      Cena (bez DPH) od:
      145.86 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
      • Volume Discount

      SANDVIK

      CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

      Unique shape exhibits high performance
      Více informací
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ~ 160.2 ~ 3General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]2 ~ 162 ~ 4Radius / Long-Neck Radius57 ~ 1506 ~ 164 ~ 42
      Cena (bez DPH) od:
      105.98 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • CBN 2-Flute Corner Radius End Mill SBRE-2

        KYOWA SEIKO

        CBN 2-Flute Corner Radius End Mill SBRE-2

        Direct milling of high-hardness materials and hardened steel.Increasing the depth of cut is possible.Machining applications (machining mode): flat surface / side face / curved surface / groove / angled cut
        Více informací
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.3 ~ 6-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ~ 22Radius50 ~ 606-
        Cena (bez DPH) od:
        166.80 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • CBN 2-Flute Corner Radius End Mill SBREF-2

          KYOWA SEIKO

          CBN 2-Flute Corner Radius End Mill SBREF-2

          Direct carving of high hardness materials and hardened steel.It is possible to increase the depth of cut.Machining applications (machining type): flat face / side face / curved face / groove / bevel cut.
          Více informací
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          0.3 ~ 3-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ~ 22Radius50 ~ 604-
          Cena (bez DPH) od:
          159.70 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • CBN 3-Flute Corner Radius End Mill SBRE-3

            KYOWA SEIKO

            CBN 3-Flute Corner Radius End Mill SBRE-3

            Direct milling of high hardness materials and hardened steel.High efficiency machining is possible with high feed rate.Machining applications (machining shape): flat surface / side surface / curved surface / groove / bevel cut.
            Více informací
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            3 ~ 6-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]1.5 ~ 23High-Feed Radius50 ~ 706-
            Cena (bez DPH) od:
            288.25 €
            Běžné datum odeslání:
            8 pracovních dnů
            Konfigurovat
          • CBN 3-Flute Corner Radius End Mill SBREF-3

              KYOWA SEIKO

              CBN 3-Flute Corner Radius End Mill SBREF-3

              Direct milling of high-hardness materials and hardened steelHighly efficient machining with high feed rate possibleMachining applications (machining mode): flat surface / side surface / curved surface / groove / angled cut.
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              0.3 ~ 2-High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.5 ~ 1.53High-Feed Radius504-
              Cena (bez DPH) od:
              188.11 €
              Běžné datum odeslání:
              8 pracovních dnů
              Konfigurovat
            • End Mill with 2 Carbide Flutes and Corner Radius KSER-2
              • Volume Discount

              KYOWA SEIKO

              End Mill with 2 Carbide Flutes and Corner Radius KSER-2

              [Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              1 ~ 4-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]1 ~ 402Radius50 ~ 804 ~ 6-
              Cena (bez DPH) od:
              91.83 €
              Běžné datum odeslání:
              8 pracovních dnů
              Konfigurovat
            • End Mill with 2 Carbide Flutes and Corner Radius KSR-2
              • Volume Discount

              KYOWA SEIKO

              End Mill with 2 Carbide Flutes and Corner Radius KSR-2

              [Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              1 ~ 6-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]3 ~ 132Radius40 ~ 504 ~ 6-
              Cena (bez DPH) od:
              84.42 €
              Běžné datum odeslání:
              8 pracovních dnů
              Konfigurovat
            • End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
              • Volume Discount

              KYOWA SEIKO

              End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

              [Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
              Více informací
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              0.5 ~ 3-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]1.5 ~ 102Radius603-
              Cena (bez DPH) od:
              108.75 €
              Běžné datum odeslání:
              8 pracovních dnů
              Konfigurovat
            • Endmill with 3 Carbide Flutes for Aluminium Alloys for Use with Vertical Walls ALRE-3DLC

                KYOWA SEIKO

                Endmill with 3 Carbide Flutes for Aluminium Alloys for Use with Vertical Walls ALRE-3DLC

                [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting
                Více informací
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                8 ~ 16-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]12 ~ 243-100 ~ 1606 ~ 14-
                Cena (bez DPH) od:
                128.44 €
                Běžné datum odeslání:
                8 pracovních dnů
                Konfigurovat
              • Endmill with 3 Carbide Flutes and Corner Radius for Aluminium Alloys Short Type ALERS-3DLC

                  KYOWA SEIKO

                  Endmill with 3 Carbide Flutes and Corner Radius for Aluminium Alloys Short Type ALERS-3DLC

                  [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting
                  Více informací
                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                  3 ~ 16-Aluminum[◎] / Copper[◎]6 ~ 323-60 ~ 1006 ~ 16-
                  Cena (bez DPH) od:
                  109.63 €
                  Běžné datum odeslání:
                  8 pracovních dnů
                  Konfigurovat
                • Endmill with 3 Carbide Flutes and Corner Radius for Aluminium Alloys Strong Type ALERT-3DLC

                    KYOWA SEIKO

                    Endmill with 3 Carbide Flutes and Corner Radius for Aluminium Alloys Strong Type ALERT-3DLC

                    [Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting
                    Více informací
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    3 ~ 16-Aluminum[◎] / Copper[◎]4.5 ~ 243-60 ~ 1206 ~ 16-
                    Cena (bez DPH) od:
                    102.52 €
                    Běžné datum odeslání:
                    8 pracovních dnů
                    Konfigurovat
                  • End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
                    • Volume Discount

                    KYOWA SEIKO

                    End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

                    [Features] A carbide cutter suitable for general steel, stainless steel and other workpieces, 2 cutting edges, with corner R.It is resistant to breakage and chipping.The high cutting speed and high production efficiency lead to a reduction in overall production costs.[Features] Suitable for plate milling, side milling, curved surface milling, grooving and ramping.
                    Více informací
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 3-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]3 ~ 104Radius603-
                    Cena (bez DPH) od:
                    109.96 €
                    Běžné datum odeslání:
                    8 pracovních dnů
                    Konfigurovat
                  • WATERMILLS ® End Mill for Aluminium WR345 3-Flute High-Helix AL R345, No Coating

                      WATERMILLS

                      WATERMILLS ® End Mill for Aluminium WR345 3-Flute High-Helix AL R345, No Coating

                      [Features]· Strong torsion.
                      Více informací
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 200.3 ~ 4Aluminum[○] / Copper[○]12 ~ 503Radius39 ~ 1043 ~ 20-
                      Cena (bez DPH) od:
                      60.30 €
                      Běžné datum odeslání:
                      8 pracovních dnů
                      Konfigurovat
                    • SHR320 CBN High Efficiency Radius End Mill

                        NS TOOL

                        SHR320 CBN High Efficiency Radius End Mill

                        [Features]· 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.
                        Více informací
                        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                        0.5 ~ 20.1 ~ 0.3General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.25 ~ 1-Radius50 ~ 5241.5 ~ 10
                        Cena (bez DPH) od:
                        154.04 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat