Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Blade diameter (D)(φ)
    [2.7–3/0.01φ jednotek]
    [3.15–3.5/0.01φ jednotek]
    [3.6–4/0.01φ jednotek]
    [4.05–16/0.01φ jednotek]
    [17–19.99/0.01φ jednotek]
    [20.01–22.99/0.01φ jednotek]
    [24–25/0.01φ jednotek]
  • Blade length (ℓ)(mm)
  • Blade shape type
  • Number of flutes(sheet)
    • Rough and Finish End Mills RFE
      • Volume Discount

      OSG

      Rough and Finish End Mills RFE

      Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.
      Více informací
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      12 ~ 5040 ~ 120General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 8Cobalt HSSPlane / Side / Groove12 ~ 42Non-Coated
      Cena (bez DPH) od:
      74.50 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
      • Volume Discount
      • Non-Coated
      • 2 Flutes
      • S (Short)

      MISUMI

      High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

      [Features] -Quick-action steel uncoated, square, short, 2-bladed with up to ø50-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      1 ~ 502.5 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 42Non-Coated
      Cena (bez DPH) od:
      10.16 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • 2-Flute General Use, Short EDS
      • SLEVA
      • Volume Discount

      OSG

      2-Flute General Use, Short EDS

      High speed steel square series.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Zerration angle: Standard helix (30 to 44°).
      Více informací
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.45 ~ 601.1 ~ 80General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
      Cena (bez DPH) od:
      15.46 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Multi-Flute Extra Long EXML
      • Volume Discount

      OSG

      Multi-Flute Extra Long EXML

      30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.
      Více informací
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 4030 ~ 150General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
      Cena (bez DPH) od:
      28.84 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
      • Non-Coated
      • 2 Flutes
      • R (Regular)

      MISUMI

      High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

      [Features] -High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      3 ~ 2510 ~ 60General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove6 ~ 25TiCN / Non-Coated
      Běžné datum odeslání:
      7 pracovních dnů
      Konfigurovat
    • Ultra Long End Mill with 4 Flutes EXLE4

        EIKOSHA

        Ultra Long End Mill with 4 Flutes EXLE4

        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        20 ~ 50100 ~ 250General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking20 ~ 42Non-Coated
        Cena (bez DPH) od:
        264.17 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
        • Volume Discount
        • TiCN
        • 4 Flutes
        • R (Regular)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

        Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
        Cena (bez DPH) od:
        40.05 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 2 Flutes
        • L (Long)

        MISUMI

        Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

        [Features] -Uncoated long flute 2 flute type of high speed steel powder square which can expect for durability-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 2515 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
        Cena (bez DPH) od:
        22.84 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Multi-Flute Center Cut Short CC-EMS
        • Volume Discount

        OSG

        Multi-Flute Center Cut Short CC-EMS

        Cobalt high speed steel centre cut.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4Skew angle: standard spiral (30 to 44°).
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        2.5 ~ 4010 ~ 65General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
        Cena (bez DPH) od:
        16.82 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • End Mill (Multi-Flute Center-Cutting Long Type), CC-EML
        • Volume Discount

        OSG

        End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

        4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 4015 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
        Cena (bez DPH) od:
        19.92 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS
        • Volume Discount

        OSG

        V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS

        Sharp high helix type. Widely used from heavy cutting to finish cutting.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 306 ~ 55General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts6 ~ 32-
        Cena (bez DPH) od:
        34.74 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • XPM End Mill (High-Helix Short Type), XPM-EHS
        • Volume Discount

        OSG

        XPM End Mill (High-Helix Short Type), XPM-EHS

        Sharp end mill with high helix using high speed powder steel XPM as base material.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3015 ~ 55General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts8 ~ 32Non-Coated
        Cena (bez DPH) od:
        26.73 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • XPM End Mill (High-Helix Long Type), XPM-EHL
        • Volume Discount

        OSG

        XPM End Mill (High-Helix Long Type), XPM-EHL

        Long flute series with good cutting ability and a high helix. Base material adopts powdered HSS XPM.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3025 ~ 105General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts8 ~ 32Non-Coated
        Cena (bez DPH) od:
        38.05 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • CPM End Mill (Roughing, Fine-Pitch Type, Silent Type) SI-WH-RESF
        • Volume Discount

        OSG

        CPM End Mill (Roughing, Fine-Pitch Type, Silent Type) SI-WH-RESF

        [Features]・ Achieves "quiet heavy-duty cutting" with unequal flute spacing of the bottom flute and unequal lead shape of the outer edge.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3013 ~ 45General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]Roughing4 ~ 6Powder high-speed steelPlane / Side / Inclined Cuts6 ~ 25-
        Cena (bez DPH) od:
        50.67 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • 3S End Mill, 2-Flute Extra Long Blade
        • SLEVA
        • Volume Discount

        FUKUDA

        3S End Mill, 2-Flute Extra Long Blade

        Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        0.8 ~ 602.5 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2Alloy HSSPlane / Side / Groove / Plunging (Z feed)6 ~ 42Non-Coated
        Cena (bez DPH) od:
        42.27 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • 3S End Mill, 4-Flute Extra Long Blade
        • SLEVA
        • Volume Discount

        FUKUDA

        3S End Mill, 4-Flute Extra Long Blade

        Long blade for cutting such as deep grooving and wide widths Repolishing is easy
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 6030 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square4Alloy HSSPlane / Side / Groove6 ~ 42Non-Coated
        Cena (bez DPH) od:
        47.06 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • End Mill for Keyway / BS Shank (Negative Tolerance)
        • Volume Discount

        FUKUDA

        End Mill for Keyway / BS Shank (Negative Tolerance)

        Endmill dedicated for key groove machining. Negative blade diameter tolerance. BS shank.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 124.5 ~ 18Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square2High-speed steelOtherBS5Non-Coated
        Cena (bez DPH) od:
        41.74 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

        The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        46.54 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • R (Regular)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

        The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        52.20 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • L (Long)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

        The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        69.77 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
        • Volume Discount
        • AS
        • 3 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

        The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        57.35 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

        [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        5 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        44.14 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • R (Regular)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

        [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        51.92 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • L (Long)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

        [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        68.91 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
        • Volume Discount
        • AS
        • 3 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

        [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        54.09 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
        • Volume Discount
        • TiCN
        • 4 Flutes
        • S (Short)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

        Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32TiCN
        Cena (bez DPH) od:
        30.25 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
        • Volume Discount
        • TiCN
        • 4 Flutes
        • L (Long)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

        [Features] -High-speed steel powder roughing type with long flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25TiCN
        Cena (bez DPH) od:
        56.01 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
        • Volume Discount
        • TiCN
        • 3 Flutes
        • S (Short)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

        [Features] -Long shank of high-speed steel powder expected to last a long time-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
        Cena (bez DPH) od:
        53.30 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • S (Short)

        MISUMI

        AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

        [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        5 ~ 5013 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        29.75 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • R (Regular)

        MISUMI

        AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

        [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 5019 ~ 112General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        37.69 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
        • Volume Discount
        • AS
        • 4 Flutes
        • L (Long)

        MISUMI

        AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

        [Features] -High-speed steel roughing cutter that offers both good machining performance and reasonable price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 5045 ~ 150General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        45.78 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
        • Volume Discount
        • AS
        • 3 Flutes
        • S (Short)

        MISUMI

        AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

        [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        42.12 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • S (Short)

        MISUMI

        Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

        [Features] -Uncoated short flutes of high-speed steel powder expected to last a long time-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        5 ~ 3013 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
        Cena (bez DPH) od:
        37.85 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • R (Regular)

        MISUMI

        Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

        [Features] -High speed steel powder roughers uncoated with normal flute length, expecting long life-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3019 ~ 68General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
        Cena (bez DPH) od:
        48.25 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • L (Long)

        MISUMI

        Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

        [Features] -High speed steel powder roughing, uncoated, with long flute length expected to last a long time-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 2545 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25Non-Coated
        Cena (bez DPH) od:
        68.31 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 3 Flutes
        • S (Short)

        MISUMI

        Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

        [Features] -Uncoated long shank blade made of high-speed steel powder for roughing, which can be expected to have a long service life-Suitable for milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
        Cena (bez DPH) od:
        49.15 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

        [Features] -High-speed steel roughing, uncoated, short flute length with optimum pitch width for rough finishing-Can be reground. Please refer to the "Regrinding Service" page for details of how to proceed, what services you can take advantage of, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        5 ~ 5013 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
        Cena (bez DPH) od:
        21.82 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • R (Regular)

        MISUMI

        High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

        [Features] -High-speed steel roughing cutter without coating with regular flute length and optimum pitch width for roughing-Can be reground. Please refer to the "Regrinding Service" page to find out how to proceed, what services you can take advantage of, what the prices are, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 5019 ~ 112General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
        Cena (bez DPH) od:
        30.11 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • L (Long)

        MISUMI

        High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

        [Features] -High speed steel roughing cutter with uncoated long flute with optimum pitch width for roughing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        10 ~ 5045 ~ 150General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42Non-Coated
        Cena (bez DPH) od:
        37.18 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 3 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

        [Features] -High speed steel roughing cutter with uncoated long shank and optimum pitch width for rough finishing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3011 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
        Cena (bez DPH) od:
        37.78 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
        • Volume Discount
        • TiAlN
        • S (Short)

        MISUMI

        TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut

        [Features] -Short flute high-speed steel roughing cutter with standard TiAlN coating-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        5 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25TiAlN
        Cena (bez DPH) od:
        27.27 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
        • Volume Discount
        • AS
        • 3 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short

        [Features] -High-spiral design with excellent machinability, therefore suitable for a wide range of applications from heavy machining to finishing-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Powder high-speed steelPlane / Side / Groove / Inclined Cuts / Countersinking8 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        33.72 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
        • Volume Discount
        • AS
        • 4 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short

        [Features] -High flute design with excellent machinability, so it can be used for a wide range of applications from heavy machining to fine cutting-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking8 ~ 25For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        36.53 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
        • Volume Discount
        • AS
        • 3 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

        [Features] -The cutting force is reduced as the notches on the peripheral edge dissipate chips-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 2015 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Powder high-speed steelPlane / Side / Groove / Inclined Cuts / Countersinking8 ~ 20For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        44.25 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
        • Volume Discount
        • AS
        • 4 Flutes
        • S (Short)

        MISUMI

        AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

        [Features] -The cutting force is reduced as the notches on the peripheral edge divert chips-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 2015 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking8 ~ 20For High Hardness (Silicon Group)
        Cena (bez DPH) od:
        44.48 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat