Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Blade diameter (D)(φ)
    [2.7–3/0.01φ jednotek]
    [3.15–3.5/0.01φ jednotek]
    [3.6–4/0.01φ jednotek]
    [4.05–16/0.01φ jednotek]
    [17–19.99/0.01φ jednotek]
    [20.01–22.99/0.01φ jednotek]
    [24–25/0.01φ jednotek]
  • Blade length (ℓ)(mm)
  • work material
  • Blade shape type
  • Number of flutes(sheet)
  • Tool Material Type
  • Square HSS End Mills (Machining Application: Side Stránka 3)

    • Super Hard, 4-Flute 4SE

        NACHI(FUJIKOSHI)

        Super Hard, 4-Flute 4SE

        General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.
        Více informací
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        9.5 ~ 5025 ~ 70General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide10 ~ 42Non-Coated
        Cena (bez DPH) od:
        42.30 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • AG Mill, Roughing, Short AGRES

          NACHI(FUJIKOSHI)

          AG Mill, Roughing, Short AGRES

          Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.
          Více informací
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          11 ~ 3226 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Roughing4 ~ 6Cobalt HSSSide12 ~ 32AG
          Cena (bez DPH) od:
          117.47 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • AG Mill, Roughing, Medium AGREM

            NACHI(FUJIKOSHI)

            AG Mill, Roughing, Medium AGREM

            Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.
            Více informací
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            15 ~ 3240 ~ 80General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Roughing4 ~ 6Cobalt HSSSide16 ~ 32AG
            Cena (bez DPH) od:
            152.83 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • AG Mill, Roughing, Regular Length Short AGRERS

              NACHI(FUJIKOSHI)

              AG Mill, Roughing, Regular Length Short AGRERS

              Performs high-speed, high-efficiency roughing of workpiece materials from carbon steel and stainless steel to aluminum. Fine pitch nick.
              Více informací
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5070General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Roughing6Cobalt HSSSide42TiAlN
              Cena (bez DPH) od:
              868.36 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • SG-FAX Medium End Mill, 2-Flute 2MSGE

                NACHI(FUJIKOSHI)

                SG-FAX Medium End Mill, 2-Flute 2MSGE

                [Features] A medium-sized end mill with 2 cutting edges.It is suitable for high-speed milling of general steel, stainless steel and aluminium.[Features] Suitable for end milling of general steel, stainless steel, aluminium, etc.
                Více informací
                Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                39General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Alloy HSSSide6TiCN
                Cena (bez DPH) od:
                67.29 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • NATAC, 2-Flute 2NAC

                  NACHI(FUJIKOSHI)

                  NATAC, 2-Flute 2NAC

                  Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                  3.3 ~ 11.37 ~ 22General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 12Non-Coated
                  Cena (bez DPH) od:
                  40.85 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Heavy HV

                    NACHI(FUJIKOSHI)

                    Heavy HV

                    Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.
                    Více informací
                    Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                    4 ~ 3612 ~ 60General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSSide8 ~ 32Non-Coated
                    Cena (bez DPH) od:
                    48.82 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • AG Mill, 2-Flute Mill, Medium 2AGEM

                      NACHI(FUJIKOSHI)

                      AG Mill, 2-Flute Mill, Medium 2AGEM

                      Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.
                      Více informací
                      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                      8.5 ~ 1025General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Cobalt HSSSide10TiAlN
                      Cena (bez DPH) od:
                      51.84 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • AG Mill, 4-Flute, Long 4AGEL

                        NACHI(FUJIKOSHI)

                        AG Mill, 4-Flute, Long 4AGEL

                        Suitable for wide side surfaces and side milling at depth.
                        Více informací
                        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                        14 ~ 2055 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide16 ~ 20AG
                        Cena (bez DPH) od:
                        111.61 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • G Standard End Mill, 3-Flute 3GE

                          NACHI(FUJIKOSHI)

                          G Standard End Mill, 3-Flute 3GE

                          General-purpose coating end-mill.
                          Více informací
                          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                          3 ~ 406 ~ 65General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square3Cobalt HSSSide6 ~ 32TiN
                          Cena (bez DPH) od:
                          44.69 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • G Long End Mill, 4-Flute SL4GE
                          • Volume Discount

                          NACHI(FUJIKOSHI)

                          G Long End Mill, 4-Flute SL4GE

                          General-purpose coating end-mill. Suitable for wide side surfaces and side milling at depth.
                          Více informací
                          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                          735General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide10TiN
                          Cena (bez DPH) od:
                          69.45 €
                          Běžné datum odeslání:
                          10 pracovních dnů
                          Konfigurovat
                        • SG-FAX Roughing End Mill Long SGFREL

                            NACHI(FUJIKOSHI)

                            SG-FAX Roughing End Mill Long SGFREL

                            Performs coarse grooving of workpiece materials from carbon steel and stainless steel to aluminum. Fine pitch nick.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1045General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3Alloy HSSSide10TiCN
                            Cena (bez DPH) od:
                            131.31 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute Extra Long EXDL
                            • Volume Discount

                            OSG

                            2-Flute Extra Long EXDL

                            2-flute milling cutter for general purposes in super-long design with cobalt high-speed steel as basic material. Suitable for deep cuts.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 4030 ~ 150General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            26.33 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • For 2-Flute Key Groove EKD (OH1)
                            • Volume Discount

                            OSG

                            For 2-Flute Key Groove EKD (OH1)

                            2 flute general purpose cutters with a cutting edge diameter tolerance of 0 to +0.02.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 255 ~ 25General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 25Non-Coated
                            Cena (bez DPH) od:
                            16.96 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • For 2-Flute Key Groove EX-TIN-EKD (OH1)
                            • Volume Discount

                            OSG

                            For 2-Flute Key Groove EX-TIN-EKD (OH1)

                            TiN coated 2 flute cutter with a cutting edge diameter tolerance of 0 to +0.02.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 255 ~ 25General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 25TiN
                            Cena (bez DPH) od:
                            21.13 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute Short EX-TIN-EDS
                            • Volume Discount

                            OSG

                            2-Flute Short EX-TIN-EDS

                            TiN coated 2 flute general purpose cutter in short design.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            0.8 ~ 501.6 ~ 75General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 42TiN
                            Cena (bez DPH) od:
                            21.13 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute General Use, Medium
                            • Volume Discount

                            OSG

                            2-Flute General Use, Medium

                            Universal 2-flute cutter in medium design with cobalt high-speed steel as base material.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 203.5 ~ 45General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 20Non-Coated
                            Cena (bez DPH) od:
                            16.24 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute, Medium, EX-TIN-EDN
                            • Volume Discount

                            OSG

                            2-Flute, Medium, EX-TIN-EDN

                            TiN-coated all-purpose end mill with 2 cutting edges and medium shape.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 203.5 ~ 45General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 20TiN
                            Cena (bez DPH) od:
                            26.83 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute Long Shank Medium LS-EDN
                            • Volume Discount

                            OSG

                            2-Flute Long Shank Medium LS-EDN

                            Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            10 ~ 4025 ~ 65General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide10 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            28.84 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 2-Flute General Use, Long
                            • SLEVA
                            • Volume Discount

                            OSG

                            2-Flute General Use, Long

                            Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            0.8 ~ 406 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            18.22 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • 2-Flute, Long, EX-TIN-EDL
                            • Volume Discount

                            OSG

                            2-Flute, Long, EX-TIN-EDL

                            TiN-coated all-purpose end mill with 2 cutting edges in long version. Suitable for deep cuts.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 406 ~ 110General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSSide6 ~ 32TiN
                            Cena (bez DPH) od:
                            27.73 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • End Mill (3-Flute General-Purpose Short Type), ETS
                            • SLEVA
                            • Volume Discount

                            OSG

                            End Mill (3-Flute General-Purpose Short Type), ETS

                            Short 3 flute cutter for general purpose using cobalt high speed steel as base material.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 302.5 ~ 55General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Cobalt HSSSide6 ~ 25Non-Coated
                            Cena (bez DPH) od:
                            18.62 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • Multi-Flute Center Cut Short CC-EMS
                            • Volume Discount

                            OSG

                            Multi-Flute Center Cut Short CC-EMS

                            Cobalt high speed steel centre cut.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4Skew angle: standard spiral (30 to 44°).
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            2.5 ~ 4010 ~ 65General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            16.82 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • End Mill (Multi-Flute Long-Shank Short Type), LS-EMS
                            • Volume Discount

                            OSG

                            End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

                            General purpose cutter with 4 cutting edges and long shank in short design made of cobalt high speed steel as basic material. It can be used for machining long projections.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            10 ~ 5025 ~ 75General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide10 ~ 42Non-Coated
                            Cena (bez DPH) od:
                            30.84 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • End Mill (Multi-Flute Long-Shank Long Type), LS-EML
                            • Volume Discount

                            OSG

                            End Mill (Multi-Flute Long-Shank Long Type), LS-EML

                            General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            10 ~ 4045 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide10 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            32.54 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • 4-Flute, Long, EX-TIN-EML
                            • Volume Discount

                            OSG

                            4-Flute, Long, EX-TIN-EML

                            TIN coating, helix angle 30°, cobalt high speed steel square end-mill.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 4015 ~ 110General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSSide6 ~ 32TiN
                            Cena (bez DPH) od:
                            30.14 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN
                            • Volume Discount

                            OSG

                            CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

                            2-flute straight flute end mill, medium type for moulding using powder metal high speed steel CPM as base material. It can be formed into the shape required for use.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1.5 ~ 205 ~ 45General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 20Non-Coated
                            Cena (bez DPH) od:
                            24.83 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)

                            V coating applied powder high speed XPM key groove processing end-mill
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 125 ~ 15General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 12-
                            Cena (bez DPH) od:
                            38.05 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS

                            V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 402.5 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 32-
                            Cena (bez DPH) od:
                            30.34 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill, (2-Flute Short Type), XPM-EDS
                            • Volume Discount

                            OSG

                            XPM End Mill, (2-Flute Short Type), XPM-EDS

                            2 flute short cutter with powder metal high speed steel XPM as base material.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            0.8 ~ 402 ~ 65General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            22.83 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN
                            • Volume Discount

                            OSG

                            V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN

                            Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide5 ~ 24-
                            Cena (bez DPH) od:
                            35.85 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN

                            V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 203.5 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 20-
                            Cena (bez DPH) od:
                            30.34 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill (2-Flute Medium Type), XPM-EDN
                            • Volume Discount

                            OSG

                            XPM End Mill (2-Flute Medium Type), XPM-EDN

                            Medium 2 flute cutter with powder metal high speed steel XPM as base material.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            1 ~ 203.5 ~ 45General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 20Non-Coated
                            Cena (bez DPH) od:
                            24.13 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (2-Flute Long Type), V-XPM-EDL
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (2-Flute Long Type), V-XPM-EDL

                            V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 3015 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 25-
                            Cena (bez DPH) od:
                            37.05 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill (2-Flute, Long) XPM-EDL
                            • Volume Discount

                            OSG

                            XPM End Mill (2-Flute, Long) XPM-EDL

                            2 flute cutter in long version with powder metal high speed steel XPM as basic material. Suitable for deep cuts.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 4015 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            28.04 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN
                            • Volume Discount

                            OSG

                            XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN

                            Long shank form end mill with 2 blades for deep engraving. Set with a shank radius thinner than the blade bore.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            8 ~ 5020 ~ 75General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square2Powder high-speed steelSide6 ~ 42Non-Coated
                            Cena (bez DPH) od:
                            31.88 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS

                            V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            2.5 ~ 4010 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square4Powder high-speed steelSide6 ~ 32-
                            Cena (bez DPH) od:
                            33.24 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS
                            • Volume Discount

                            OSG

                            V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS

                            Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square4Powder high-speed steelSide5 ~ 24-
                            Cena (bez DPH) od:
                            39.45 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (4-Flute Long Type), V-XPM-EML
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (4-Flute Long Type), V-XPM-EML

                            V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 3015 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square4Powder high-speed steelSide6 ~ 25-
                            Cena (bez DPH) od:
                            40.35 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS
                            • Volume Discount

                            OSG

                            XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS

                            Long shank form end mill with 4 blades for deep engraving. Set with a shank radius thinner than the blade bore.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            8 ~ 5020 ~ 75General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square4Powder high-speed steelSide6 ~ 42Non-Coated
                            Cena (bez DPH) od:
                            33.34 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS
                            • Volume Discount

                            OSG

                            TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS

                            TIN coating, helix angle 50°, short size end-mill.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            6 ~ 3015 ~ 55General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelSide8 ~ 32TiN
                            Cena (bez DPH) od:
                            39.05 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS
                            • Volume Discount

                            OSG

                            V Coated XPM End Mill (High-Helix Short Type), V-XPM-EHS

                            Sharp high helix type. Widely used from heavy cutting to finish cutting.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            3 ~ 306 ~ 55General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelSide6 ~ 32-
                            Cena (bez DPH) od:
                            34.74 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • TIN Coated XPM End Mill (High Helix Long Type) TIN-XPM-EHL
                            • Volume Discount

                            OSG

                            TIN Coated XPM End Mill (High Helix Long Type) TIN-XPM-EHL

                            TIN coating, helix angle 50°, long size end-mill.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            6 ~ 3025 ~ 105General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelSide8 ~ 32TiN
                            Cena (bez DPH) od:
                            50.87 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM, High-Helix Long Type, V-XPM-EHL
                            • Volume Discount

                            OSG

                            XPM, High-Helix Long Type, V-XPM-EHL

                            Long flute series with good cutting ability and a high helix. Stable tool life obtained by V coating.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            6 ~ 3025 ~ 105General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Square3 ~ 4Powder high-speed steelSide8 ~ 32-
                            Cena (bez DPH) od:
                            50.87 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • XPM End Mill (Multi-Flute Short Type), XPM-EMS
                            • Volume Discount

                            OSG

                            XPM End Mill (Multi-Flute Short Type), XPM-EMS

                            4-flute short end mill with powder metal high-speed steel XPM as base material.
                            Více informací
                            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
                            2 ~ 408 ~ 65General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square4Powder high-speed steelSide6 ~ 32Non-Coated
                            Cena (bez DPH) od:
                            25.03 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat