Square End Mills (HSS)（work material：Aluminum Page 2）

152

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

AG Mill, 2-Flute 2AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	42.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 2-Flute SL2GE

NACHI(FUJIKOSHI)

Performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for deep grooving and grooving at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG-FAX End Mill, Long, 2-Flute SL2SGE

NACHI(FUJIKOSHI)

General-purpose coating end-mill. Suitable for deep grooving and grooving at depth.

Select to compare

Configure now
Starting from^∗ ：	72.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG-FAX End Mill, 2-Flute 2SGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	61.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, Long 4-Flute RSL4SE

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	43.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	31.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SG-FAX Medium End Mill, 2-Flute 2MSGE

NACHI(FUJIKOSHI)

[Features]
A medium-sized end mill with 2 cutting edges.
It is suitable for high-speed milling of general steel, stainless steel and aluminium.
[Features]
Suitable for end milling of general steel, stainless steel, aluminium, etc.

Select to compare

Configure now
Starting from^∗ ：	61.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, 4-Flute 4RSE

NACHI(FUJIKOSHI)

[Features]
A super hard general purpose cutter with 4 cutting edges.
Made from cobalt high speed steel and offers great value for money.
[Features]
Suitable for side milling etc, on wide and deep sides.

Select to compare

Configure now
Starting from^∗ ：	36.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, Long 2-Flute RSL2SE

NACHI(FUJIKOSHI)

General purpose end mill. Suitable for deep grooving and plunging in deep places.

Select to compare

Configure now
Starting from^∗ ：	39.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Long 4-Flute SL4SE

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	43.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

NATAC, 2-Flute 2NAC

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

AG Mill, 2-Flute Mill, Medium 2AGEM

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	42.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 4-Flute, Long 4AGEL

NACHI(FUJIKOSHI)

Suitable for wide side surfaces and side milling at depth.

Select to compare

Configure now
Starting from^∗ ：	55.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G 2-Flute End Mill for Key Groove GHKEY

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

G 2-Flute End Mill for Key Groove GLKEY

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 3-Flute 3GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill.

Select to compare

Configure now
Starting from^∗ ：	46.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 4-Flute SL4GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill. Suitable for wide side surfaces and side milling at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OH1)

OSG

2 flute general purpose cutters with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EX-TIN-EKD (OH1)

OSG

TiN coated 2 flute cutter with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Short EX-TIN-EDS

OSG

TiN coated 2 flute general purpose cutter in short design.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute General Use, Medium

OSG

Universal 2-flute cutter in medium design with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Medium, EX-TIN-EDN

OSG

TiN-coated all-purpose end mill with 2 cutting edges and medium shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Medium LS-EDN

OSG

Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute General Use, Long

OSG

Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute, Long, EX-TIN-EDL

OSG

TiN-coated all-purpose end mill with 2 cutting edges in long version. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

End Mill (3-Flute General-Purpose Short Type), ETS

OSG

Short 3 flute cutter for general purpose using cobalt high speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

OSG

4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

OSG

General purpose cutter with 4 cutting edges and long shank in short design made of cobalt high speed steel as basic material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Long, EX-TIN-EML

OSG

TIN coating, helix angle 30°, cobalt high speed steel square end-mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

OSG

2-flute straight flute end mill, medium type for moulding using powder metal high speed steel CPM as base material. It can be formed into the shape required for use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)

OSG

V coating applied powder high speed XPM key groove processing end-mill

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (2-Flute Medium Type), XPM-EDN

OSG

Medium 2 flute cutter with powder metal high speed steel XPM as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	AG Mill, 2-Flute 2AGE	G Standard End Mill, 4-Flute 4GE	G Long End Mill, 2-Flute SL2GE	SG-FAX End Mill, Long, 2-Flute SL2SGE	SG-FAX End Mill, 2-Flute 2SGE	Super Hard, 2-Flute 2SE	Super Hard, Regular Shank, Long 4-Flute RSL4SE	AG Mill, 4-Flute 4AGE	SG-FAX Medium End Mill, 2-Flute 2MSGE	Super Hard, Regular Shank, 4-Flute 4RSE	Super Hard, Regular Shank, Long 2-Flute RSL2SE	Super Hard, Long 4-Flute SL4SE	NATAC, 2-Flute 2NAC	AG Mill, 2-Flute Mill, Medium 2AGEM	AG Mill, 4-Flute, Long 4AGEL	G 2-Flute End Mill for Key Groove GHKEY	G 2-Flute End Mill for Key Groove GLKEY	G Standard End Mill, 2-Flute 2GE	G Standard End Mill, 3-Flute 3GE	G Long End Mill, 4-Flute SL4GE	For 2-Flute Key Groove EKD (OH1)	For 2-Flute Key Groove EX-TIN-EKD (OH1)	2-Flute Short EX-TIN-EDS	2-Flute General Use, Medium	2-Flute, Medium, EX-TIN-EDN	2-Flute Long Shank Medium LS-EDN	2-Flute General Use, Long	2-Flute, Long, EX-TIN-EDL	End Mill (3-Flute General-Purpose Short Type), ETS	End Mill (Multi-Flute Center-Cutting Long Type), CC-EML	End Mill (Multi-Flute Long-Shank Short Type), LS-EMS	4-Flute, Long, EX-TIN-EML	CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN	V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)	V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS	V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN	V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN	XPM End Mill (2-Flute Medium Type), XPM-EDN
Starting from^∗	-	-	-	-	-	-	-	42.02 € *Unit price with basic configuration	45.91 € *Unit price with basic configuration	50.14 € *Unit price with basic configuration	72.81 € *Unit price with basic configuration	61.41 € *Unit price with basic configuration	31.37 € *Unit price with basic configuration	43.48 € *Unit price with basic configuration	31.38 € Special price *Unit price with basic configuration Promotional pricing	61.41 € *Unit price with basic configuration	36.57 € *Unit price with basic configuration	39.81 € *Unit price with basic configuration	43.90 € *Unit price with basic configuration	19.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	42.02 € *Unit price with basic configuration	55.10 € *Unit price with basic configuration	25.01 € *Unit price with basic configuration Volume Discount	27.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	40.60 € *Unit price with basic configuration	46.50 € *Unit price with basic configuration	55.10 € *Unit price with basic configuration	16.96 € *Unit price with basic configuration Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	16.24 € *Unit price with basic configuration Volume Discount	26.83 € *Unit price with basic configuration Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	18.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	27.73 € *Unit price with basic configuration Volume Discount	18.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.92 € *Unit price with basic configuration Volume Discount	30.84 € *Unit price with basic configuration Volume Discount	30.14 € *Unit price with basic configuration Volume Discount	24.83 € *Unit price with basic configuration Volume Discount	38.05 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	35.85 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	24.13 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 25	2.7 ～ 24.99	1 ～ 50	2.5 ～ 50	3 ～ 40	3 ～ 30	1.5 ～ 30	1 ～ 50	4 ～ 18	2.5 ～ 50	2 ～ 30	4 ～ 18	4 ～ 18	3 ～ 40	1.2 ～ 20	1.5 ～ 20	3 ～ 40	3 ～ 20	6 ～ 16	1 ～ 50	3 ～ 40	3 ～ 40	3 ～ 25	3 ～ 25	0.8 ～ 50	1 ～ 20	1 ～ 20	10 ～ 40	0.8 ～ 40	1 ～ 40	1 ～ 30	3 ～ 40	10 ～ 50	3 ～ 40	1.5 ～ 20	3 ～ 12	1 ～ 40	6 ～ 25	1 ～ 20	1 ～ 20
Blade length (ℓ)(mm)	12 ～ 68	-	-	-	-	8 ～ 50	10 ～ 60	2 ～ 70	7 ～ 70	15 ～ 125	15 ～ 90	3 ～ 55	2 ～ 70	20 ～ 65	7 ～ 70	7 ～ 60	12 ～ 40	20 ～ 65	15 ～ 125	2.5 ～ 40	3 ～ 45	15 ～ 125	6 ～ 20	10 ～ 18	2 ～ 70	6 ～ 65	15 ～ 125	5 ～ 25	5 ～ 25	1.6 ～ 75	3.5 ～ 45	3.5 ～ 45	25 ～ 65	6 ～ 110	6 ～ 110	2.5 ～ 55	15 ～ 110	25 ～ 75	15 ～ 110	5 ～ 45	5 ～ 15	2.5 ～ 65	15 ～ 50	3.5 ～ 45	3.5 ～ 45
work material	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]	Aluminum[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	4	2	2	4	4	2	2	2	4	2	2	2	2	4	4	2	4	2	4	2	2	4	2	2	2	3	4	2	2	2	2	2	2	2	2	3	4	4	4	2	2	2	2	2	2
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Machining Application	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Shank diameter (d)(mm)	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 16	6 ～ 42	6 ～ 25	6 ～ 16	6 ～ 16	6 ～ 32	6 ～ 20	6 ～ 20	6 ～ 32	6 ～ 20	8 ～ 16	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 20	6 ～ 20	10 ～ 32	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	10 ～ 42	6 ～ 32	6 ～ 20	6 ～ 12	6 ～ 32	5 ～ 24	6 ～ 20	6 ～ 20
Coating	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	AG	TiN	TiN	TiCN	TiCN	Non-Coated	Non-Coated	AG	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	AG	TiN	TiN	TiN	TiN	TiN	Non-Coated	TiN	TiN	Non-Coated	TiN	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	-	-	-	-	Non-Coated
Overall Length (L)(mm)	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 120	50 ～ 130	50 ～ 160	50 ～ 160	60 ～ 210	65 ～ 180	50 ～ 135	50 ～ 160	55 ～ 120	50 ～ 160	50 ～ 135	45 ～ 95	55 ～ 120	60 ～ 210	50 ～ 110	50 ～ 110	60 ～ 210	50 ～ 85	60 ～ 80	50 ～ 160	50 ～ 150	60 ～ 210	50 ～ 95	50 ～ 95	45 ～ 165	45 ～ 110	45 ～ 110	125 ～ 235	50 ～ 195	50 ～ 195	45 ～ 125	60 ～ 195	125 ～ 340	60 ～ 195	45 ～ 110	50 ～ 70	50 ～ 165	85 ～ 160	55 ～ 125	55 ～ 125
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear