Cutters / Indexable End Mills（Machining Application：Side Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
For Multifunction Use BXD4000
MITSUBISHI MATERIALS
A low-resistance type insert with a high-rigidity body. Good wall surface accuracy. Excellent chip discharge is achieved with the adoption of a coolant hole. Supports High-Speed RotationConfigure nowStarting from∗ ： 339.74 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Threaded Type
OSG
Screw Type Cutter For side surfaces, grooving, digging and form cutting.Configure nowStarting from∗ ： 331.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Straight Shank Type
OSG
The wide reversible plate pocket improves cutting performance, and the use of a body retraction mould that supports 3D machining enables highly efficient mould machining.Configure nowStarting from∗ ： 248.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive Mill, Neo Shell Type
OSG
Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.Configure nowStarting from∗ ： 751.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Addition to multi-blade 20mm shank that uses small type of inserts good for application in small machines.Configure nowStarting from∗ ： 164.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Configure nowStarting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Configure nowStarting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Configure nowStarting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Straight Shank Type
OSG
Indexable high feed radius cutter, threaded. Special holders support different machining depths.Configure nowStarting from∗ ： 231.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Threaded Type
OSG
PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 404.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Bore Type
OSG
PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 318.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Efficiency Radius Cutters with Shaft
OSG
A high feed radius cutter series with variable negative chamfer insert that prevents chipping and reduces cutting force.Configure nowStarting from∗ ： 291.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
APX4000 Long Blade Type End Mill (Shell Type)
MITSUBISHI MATERIALS
15° positive low-resistance type insert. Capable of high precision and high quality wall machining. With Coolant HoleConfigure nowStarting from∗ ： 1,382.18 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
PMC Type Screw-In End Mill
MITSUBISHI MATERIALS
For press/die trimming. Capable of reciprocating type machining with long projectionsConfigure nowStarting from∗ ： 339.74 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
VFX5, VFX5 Type End Mill
MITSUBISHI MATERIALS
Unique horizontal insert. Screw-on type clamp. Perfect for titanium alloy cutting.Configure nowStarting from∗ ： 1,034.94 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
VFX6 Type End Mill
MITSUBISHI MATERIALS
Unique horizontal insert. Screw-on type clamp. Perfect for titanium alloy cutting.Configure nowStarting from∗ ： 1,234.42 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
ASX400 Type Front Face Mill (Shank Type)
MITSUBISHI MATERIALS
High precision, no-polish type insert that uses 4 corners to be economical, while delivering good wall precision due to the curved cutting edges and high precision body.Configure nowStarting from∗ ： 397.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
ASX400 Type Front Face Mill (Screw-In Type)
MITSUBISHI MATERIALS
High precision, no-polish type insert that uses 4 corners to be economical, while delivering good wall precision due to the curved cutting edges and high precision body.Configure nowStarting from∗ ： 342.68 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
SPX Type End Mill for Deep Cutting (Shell Type)
MITSUBISHI MATERIALS
Adopts an insert with a wavy blade for low cutting resistance. Holder rigidity is high, optimum for heavy cuttingConfigure nowStarting from∗ ： 1,625.98 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 296.81 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Aero Mill (Positive Type)
FUJIGEN
[Features]
· Ideal for use in low-rigidity machines such as tapping centers.
· It supports a variety of workpieces with the lineup of negative and positive types.Configure nowStarting from∗ ： 296.81 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Tiko Cutter
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.
[Features]
· Small diameter shank lineup allows use for small machining.
· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)Configure nowStarting from∗ ： 472.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut (NS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut (PS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 801.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Nice Cut (NT Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut Arm【1-6 Pieces Per Package】
FUJIGEN
[Features]
2 types of beautiful cutting arms, 3-blade and 6-blade.
[Features]
It also supports high-speed cutting.Configure nowStarting from∗ ： 427.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shuririn
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.Configure nowStarting from∗ ： 196.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Corner Tool
FUJIGEN
[Features]
-Various corner radius finishes are possible by replacing inserts.
[Features]
For finishing flat surfaces and sides.Configure nowStarting from∗ ： 255.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dekasumi
FUJIGEN
This product can mill larger corner radii than "Sumicco".
It can mill corner radii from R5 to R10 by changing the inserts.Configure nowStarting from∗ ： 321.59 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Sky Cut
FUJIGEN
[Features]
· As it is a negative insert, all 6 corners of the front and back can be used.
· Durability is improved by the double clamp.Configure nowStarting from∗ ： 395.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
NEW Nice Cut Base
FUJIGEN
[Features]
· It has undergone innovative evolution. : 2 types, a 3-flute type and a 6-flute type, support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type).Configure nowStarting from∗ ： 384.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Full Cut Mill (FCM Type Long)
BIG KAISER
[Features]
· It is comparable to a sharp and tough solid end mill. Throw-away end mill cutter. Low resistance and high efficiency cutter dedicated for lateral feed processing.Configure nowStarting from∗ ： 174.90 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Full Cut Mill FCM Arbor Type
BIG KAISER
[Features]
· Exhibits amazing cutting performance with No. 40 machining as well as composite machines, and also supports new standard FMH type face mill arborsConfigure nowStarting from∗ ： 232.15 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Full Cut Mill FCR Type Straight Shank Type
BIG KAISER
[Features]
· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.Configure nowStarting from∗ ： 189.00 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
SHE Shell End Mill G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arborConfigure nowStarting from∗ ： 366.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shell End Mill for MCS, MC G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arborConfigure nowStarting from∗ ： 476.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Bore Type
OSG
By using this high precision insert, excellent bottom surface roughness is achieved. The bottom notch effect splits chips in two during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Configure nowStarting from∗ ： 335.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Side Chipper (Shank Type Mill) SIC Type - Medium Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 257.18 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Side Chipper (Bore Type Mill) SIC Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 446.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 672.93 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super End Chipper SEC Type - Standard Type, Medium-Long Type
DIJET
Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.Configure nowStarting from∗ ： 541.62 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shred Mill Helical End Mill
ISCAR
[Features]
Mill and spiral cutters.
[Features]
Suitable for shoulder milling and helical countersinking.Configure nowStarting from∗ ： 1,024.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Sumo Drill (5 mm Hilt) End Mill
ISCAR
[Features]
Counter sunk milling tool.
[Features]
For side machining.Configure nowStarting from∗ ： 261.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TAC Flash End Mill EFVX
TUNGALOY
For multi-functional machining of steel, stainless steel, and cast ironConfigure nowStarting from∗ ： 191.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MECX Type End Mill
KYOCERA
[Features]
The low cutting force and high strength are suitable for compact machines.
The universal JT chip breaker and low cutting force JS chip breaker cover a wide range of cutting areas.Configure nowStarting from∗ ： 308.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MITSUBISHI MATERIALS | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | BIG KAISER | BIG KAISER | BIG KAISER | ASAHI TOOLS | ASAHI TOOLS | OSG | DIJET | DIJET | DIJET | DIJET | ISCAR | ISCAR | TUNGALOY | KYOCERA |
| Product Series | Super End Chipper SEC Type - Standard Type, Medium-Long Type | ||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 339.74 € *Unit price with basic configuration | 331.10 € *Unit price with basic configuration | 248.60 € *Unit price with basic configuration | 751.17 € *Unit price with basic configuration | 164.58 € *Unit price with basic configuration | 496.42 € *Unit price with basic configuration | 260.30 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 231.83 € *Unit price with basic configuration | 404.50 € *Unit price with basic configuration | 318.50 € *Unit price with basic configuration | 291.42 € *Unit price with basic configuration | 1,382.18 € *Unit price with basic configuration | 339.74 € *Unit price with basic configuration | 1,034.94 € *Unit price with basic configuration | 1,234.42 € *Unit price with basic configuration | 397.36 € *Unit price with basic configuration | 342.68 € *Unit price with basic configuration | 1,625.98 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 472.18 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 801.94 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 427.96 € *Unit price with basic configuration | 196.18 € *Unit price with basic configuration | 255.43 € *Unit price with basic configuration | 321.59 € *Unit price with basic configuration | 395.94 € *Unit price with basic configuration | 384.27 € *Unit price with basic configuration | 174.90 € *Unit price with basic configuration | 232.15 € *Unit price with basic configuration | 189.00 € *Unit price with basic configuration | 366.34 € *Unit price with basic configuration | 476.44 € *Unit price with basic configuration | 335.83 € *Unit price with basic configuration | 257.18 € *Unit price with basic configuration | 446.80 € *Unit price with basic configuration | 672.93 € *Unit price with basic configuration | 541.62 € *Unit price with basic configuration | 1,024.40 € *Unit price with basic configuration | 261.02 € *Unit price with basic configuration | 191.63 € *Unit price with basic configuration | 308.14 € *Unit price with basic configuration |
| Min. Shipping Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 9 Days | 9 Days | 9 Days | 8 Days | 9 Days | 9 Days | 9 Days | 8 Days | 9 Days | 7 Days | 8 Days | 7 Days | 8 Days | 9 Days | 8 Days | 9 Days | 8 Days | 7 Days | 9 Days | 9 Days | 9 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days |
| Machining Application | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side | Side |
| blade diameter D(mm) | 20 ～ 125 | 10 ～ 30 | 10 ～ 88 | 50 | 20 | 32 ～ 63 | 16 ～ 63 | 16 ～ 40 | 13.2 ～ 46.4 | 13.2 ～ 28.2 | 23.4 ～ 83.4 | 20 ～ 105 | 50 ～ 63 | 25 ～ 40 | 40 ～ 80 | 63 ～ 100 | 40 ～ 80 | 32 ～ 40 | 63 ～ 80 | 30 ～ 40 | 30 ～ 40 | 60 ～ 80 | 100 ～ 150 | 100 ～ 130 | 110 ～ 160 | - | 20 ～ 50 | 30 ～ 80 | 40 | 40 ～ 80 | 100 ～ 150 | 16 ～ 32 | 50 ～ 100 | 16 ～ 33 | 50 ～ 100 | 50 ～ 100 | - | 20 ～ 50 | 63 ～ 100 | 40 ～ 50 | 40 ～ 50 | 40 ～ 50 | 8 ～ 16 | - | 20 |
| work material | - | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium | General Steel / High Hardness Steel / Cast Iron | - | - | - | - | - | - | - | General Steel / Stainless Steel / Aluminum / Resin | Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | General Steel / Stainless Steel / Aluminum / Resin | - | - | - | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | - | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium / Copper | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium / Copper | - | General Steel / Quenched and tempered steel / High Hardness Steel / Stainless Steel / Cast Iron / Titanium / Copper | General Steel / Quenched and tempered steel / Stainless Steel | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron | General Steel / Quenched and tempered steel / Stainless Steel / Cast Iron | - |
| Mounting Method | - | Centering Plug | With handle / Arbor | Arbor | With handle | With handle | With handle | Centering Plug | With handle | Centering Plug | Arbor | With handle / Centering Plug | - | - | - | - | - | - | - | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | Arbor | With handle | Arbor | Arbor | - | With handle | Arbor | With handle | With handle | With handle | With handle | - | - |
| Finish category | Finishing | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | - | - | - | - | - | - | - | - | - | - | Finishing | Finishing | - | - |
| Overall length (L)(mm) | 50 ～ 250 | 33 ～ 40 | 40 ～ 250 | 40 | 100 | 150 ～ 200 | 90 ～ 190 | 27 ～ 40 | 140 ～ 300 | 35 ～ 40 | 40 ～ 63 | 63 ～ 306 | 65 ～ 85 | 58.7 ～ 74.4 | 50 ～ 100 | 60 ～ 115 | 125 | 63 ～ 68 | 85 | 85 | 85 | 120 | 120 ～ 123.5 | 123.5 | 120 ～ 123.5 | - | 100 ～ 105 | 105 ～ 200 | 134.6 ～ 185 | 120 | 120 ～ 123.5 | - | 40 ～ 50 | 120 ～ 180 | - | 60 ～ 110 | - | 110 ～ 150 | - | 200 ～ 250 | 160 ～ 170 | 140 ～ 265 | 60 ～ 80 | 120 ～ 360 | 110 |
| Shank diameter (d)(mm) | 20 ～ 42 | - | 20 ～ 42 | - | 20 | 32 | 16 ～ 32 | - | 25 ～ 42 | - | - | MT5-M16 ～ CN50.8 | - | 10.5 ～ 17 | - | - | 32 | 17 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 ～ 32 | - | - | - | 20 ～ 32 | - | 50.8 | 32 ～ 42 | 32 ～ 50 | C08 ～ C16 | 16 ～ 42 | 16 |
| Number of flutes(sheet) | 1 ～ 7 | 2 ～ 4 | 2 ～ 10 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 2 ～ 6 | 2 ～ 5 | 2 ～ 4 | 3 ～ 8 | 2 ～ 6 | 9 ～ 16 | - | 6 ～ 36 | 8 ～ 36 | 3 ～ 6 | 2 ～ 3 | 24 | 3 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 2 ～ 5 | 2 ～ 4 | 2 | 3 | 3 ～ 6 | 2 | 5 ～ 6 | 2 ～ 3 | 6 ～ 10 | 6 ～ 10 | 3 ～ 11 | - | - | - | - | 9 ～ 27 | 1 ～ 5 | - | 4 |
| Compatible Tip Material | - | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - | - | - | - | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet | No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | - | - | - | - | - | - | - | - | - | - | Carbide Coat | Carbide Coat | - | - |
| Maximum Cutting Depth (Ad)(mm) | 15 | - | - | - | - | - | - | - | - | - | - | - | 42 ～ 56 | - | 26 ～ 75 | 31 ～ 90 | 10 | - | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 53 ～ 160 | 5 | - | - |
| Underneck length (ℓ1)(mm) | 35 ～ 80 | - | 50 ～ 120 | - | 30 | 45 | 25 ～ 90 | - | 40 ～ 180 | - | - | 50 ～ 170 | - | 39.7 ～ 51.4 | - | - | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 ～ 90 | 20 ～ 22 | 25 ～ 48 | - | - | - | 25 ～ 40 | - | 100 ～ 150 | 60 ～ 70 | - | - | - | - |
Loading...
Filter by:
-
Machining Application
-
blade diameter D(mm)
- 2
- 4
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8 mm
- 8.00 mm
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10 mm
- 10.00 mm
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12 mm
- 12.00 mm
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16 mm
- 16.00 mm
- Cutter Diameter φ16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.5
- 17.6
- 18
- 18 mm
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 19.05
- 19.5
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20 mm
- 20.00 mm
- Cutter Diameter φ20
- 20.00 - 32.00
- 20.2
- 20.5
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 21.5
- 22
- 22 mm
- Cutter Diameter φ22
- 22.00 - 32.00
- 22.5
- 23
- 23.2
- 23.29 - 38.10
- 23.4
- 23.5
- 23.8
- 24
- 24.00 - 32.00
- 24.5
- 25
- 25
- 25 mm
- 25.00 mm
- Cutter Diameter φ25
- 25.20 - 40.00
- 25.4
- 25.5
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.5
- 26.8
- 27
- 27.20 - 42.00
- 27.5
- 28
- 28 mm
- 28.2
- 28.5
- 29
- 29.40 - 44.00
- 29.5
- 30
- 30 mm
- 30/32
- 30.5
- 30.7
- 31
- 31.5
- 31.75
- 32
- 32
- 32 mm
- 32.00 mm
- Cutter Diameter φ32
- 32.5
- 33
- 33.4
- 34
- 35
- 35 mm
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.00 mm
- Cutter Diameter φ40
- 40.50 / 51.90
- 42
- 43
- 44
- 46.4
- 47
- 48
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50 mm
- 50.00 mm
- Cutter Diameter φ50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 58
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63 mm
- 63.00 mm
- Cutter Diameter φ63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 71
- 72
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80 mm
- 80.00 mm
- Cutter Diameter φ80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98
- 98.7
- 98.8
- 100
- 100 mm
- 100.00 mm
- Cutter Diameter φ100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125 mm
- 125.00 mm
- Cutter Diameter φ125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 mm
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
- Cutter Diameter φ563
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
16～19.99
- 16
- 19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 27.2
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 37
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 47.5
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 52
- 53.26
- 54
- 55
- 56
- 56.9
- 57
- 58
- 58.7
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 64
- 65
- 66
- 68
-
70～78
- 70
- 70.002
- 72
- 72.5
- 73
- 74
- 74.4
- 75
- 76
- 77
- 77.7
- 78
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～99
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
- 99
-
100～109
- 100
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 119.99
-
120～129.5
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 126
- 127
- 128
- 129.5
-
130～139
- 130
- 130/131.6
- 131
- 132
- 132.5
- 133
- 134
- 134.6
- 135
- 135.5
- 136
- 137
- 138
- 138.5
- 139
-
140～149
- 140
- 141
- 141.5
- 142
- 143
- 144
- 144.5
- 144.78
- 145
- 146
- 147
- 147.5
- 149
-
150～159.99
- 150
- 150.5
- 151
- 152
- 152.4
- 153
- 153.5
- 154
- 155
- 156
- 157
- 158
- 159.99
-
160～169.5
- 160
- 161
- 161.5
- 163
- 164.5
- 165
- 165.1
- 166
- 167
- 167.5
- 169
- 169.5
-
170～177
- 170
- 170.5
- 171
- 172
- 173
- 173.5
- 174.5
- 175
- 176
- 177
-
180～189.5
- 180
- 180/181.6
- 182
- 184.6
- 185
- 186
- 186.5
- 187
- 188
- 189.5
-
190～198
- 190
- 190.5
- 191
- 192
- 194
- 195
- 197
- 198
-
200～209
- 200
- 202
- 203
- 203.2
- 207
- 209
-
210～219
- 210
- 212
- 215
- 216
- 217
- 219
-
220～228.6
- 220
- 221
- 222
- 224
- 225
- 227
- 228.6
-
230～238
- 230
- 232
- 238
-
240～249.8
- 240
- 244
- 245
- 247
- 249.8
-
250～257
- 250
- 252
- 254
- 255
- 256
- 257
-
260～265
- 260
- 262
- 265
-
270～279.5
- 270
- 278
- 279.5
-
280～289.8
- 280
- 284
- 286
- 289.8
-
290
-
300～306
- 300
- 306
-
310～315
- 310
- 315
-
329.5
-
339.8
-
350
-
360
-
389.8
-
439.8
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Brand
-
- TUNGALOY (39)
- SANDVIK (25)
- MITSUBISHI MATERIALS (18)
- OSG (17)
- FUJIGEN (12)
- DIJET (7)
- BIG KAISER (6)
- KYOCERA (4)
- ASAHI TOOLS (2)
- ISCAR (2)
- PHOENIX CONTACT (0)
- ESCO (0)
- CARMEX (0)
CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.