Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Machining Application
  • blade diameter D(mm)
  • work material
  • Mounting Method
  • Finish category
  • Overall length (L)(mm)

Cutters / Indexable End Mills (work material: Copper)

    • CoroMill 327 Grooving Cutter Weldon Shank 327-B

        SANDVIK

        CoroMill 327 Grooving Cutter Weldon Shank 327-B

        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
        Groove / Chamfer-CopperWith handleFinishing74 ~ 16012 ~ 20-Carbide Coat
        Cena (bez DPH) od:
        231.25 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • CoroMill 300 End Mill

          SANDVIK

          CoroMill 300 End Mill

          Suitable for high-efficiency machining.
          Více informací
          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
          Plane12 ~ 42CopperCentering PlugRough and medium rough processing / Finishing--2 ~ 6-
          Cena (bez DPH) od:
          331.24 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • CoroMill 345 Cutter

            SANDVIK

            CoroMill 345 Cutter

            The cutter of choice when high productivity is the top priority[Features]has high rigidity and toughnessexcellent performance even with a combination of large depth of cut and high feed per tooth.
            Více informací
            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
            Plane54.08 ~ 174.08CopperArbor / Centering PlugFinishing45 ~ 6322 ~ 554 ~ 12-
            Cena (bez DPH) od:
            693.35 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • CoroMill 390 Long Edge Cutter

              SANDVIK

              CoroMill 390 Long Edge Cutter

              Suitable for high-efficiency machining.
              Více informací
              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
              Plane / Side / Groove12 ~ 40CopperWith handleRough and medium rough processing / Finishing68 ~ 11016 ~ 321 ~ 6Carbide Coat
              Cena (bez DPH) od:
              360.47 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • CoroMill 490 Cutter

                SANDVIK

                CoroMill 490 Cutter

                Suitable for high-efficiency machining.
                Více informací
                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                Plane / Side / Groove40 ~ 250CopperArborRough and medium rough processing / Finishing-16 ~ 604 ~ 16Carbide Coat
                Cena (bez DPH) od:
                650.77 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Side Chipper (Shank Type Mill) SIC Type - Long Type

                  DIJET

                  Side Chipper (Shank Type Mill) SIC Type - Long Type

                  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron, titanium, copper[Applications] Flat Surfaces / Side Surfaces / Grooves
                  Více informací
                  Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                  Plane / Side / Groove16 ~ 50CopperWith handle-150 ~ 25016 ~ 42--
                  Cena (bez DPH) od:
                  299.89 €
                  Běžné datum odeslání:
                  8 pracovních dnů
                  Konfigurovat
                • CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q

                    SANDVIK

                    CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q

                    [Features]Round-insert cutterFor everything from roughing through to medium cutting and high-feed machiningFor profilingExtra-close pitchArbor mounting (millimeters)
                    Více informací
                    Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                    Plane40 ~ 200CopperArborRough and medium rough processing / Finishing-16 ~ 604 ~ 12-
                    Cena (bez DPH) od:
                    680.98 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • TAC Mill TGP4200-A

                      TUNGALOY

                      TAC Mill TGP4200-A

                      For General-Purpose Machining of Cast Iron / Steel
                      Více informací
                      Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                      Plane125CopperArbor-63-8Carbide Coat / Cermet
                      Cena (bez DPH) od:
                      1,171.31 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Sander Mill TME4400I/B

                        TUNGALOY

                        Sander Mill TME4400I/B

                        For general and high feed rate machining of steel, stainless steel, cast iron, and non-ferrous metals
                        Více informací
                        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                        Plane / Chamfer100 ~ 200CopperArbor-63-7 ~ 15Carbide Coat / Cermet
                        Cena (bez DPH) od:
                        977.45 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Sander Mill for Deep Cutting TME5400I

                          TUNGALOY

                          Sander Mill for Deep Cutting TME5400I

                          For general and deep cutting depth machining of steel, stainless steel, cast iron, and non-ferrous metals
                          Více informací
                          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                          Plane / Chamfer200 ~ 315CopperArbor-63-10 ~ 14Carbide Coat / Cermet
                          Cena (bez DPH) od:
                          1,696.36 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Hybrid TAC Mill High Precision Type EPH

                            TUNGALOY

                            Hybrid TAC Mill High Precision Type EPH

                            For high precision, multi-functional machining of steel and aluminum alloy
                            Více informací
                            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                            Side / Groove / Plunging (Z feed) / Inclined Cuts10 ~ 17CopperWith handle-50 ~ 1306 ~ 162 ~ 3Carbide Coat
                            Cena (bez DPH) od:
                            231.07 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Side Chipper (Shank Type Mill) SIC Type - Medium Type

                              DIJET

                              Side Chipper (Shank Type Mill) SIC Type - Medium Type

                              [Features]· It is a tool with excellent abrasion resistance.
                              Více informací
                              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                              Plane / Side / Groove20 ~ 50CopperWith handle-110 ~ 15020 ~ 32--
                              Cena (bez DPH) od:
                              247.24 €
                              Běžné datum odeslání:
                              8 pracovních dnů
                              Konfigurovat
                            • Side Chipper (Bore Type Mill) SIC Type

                                DIJET

                                Side Chipper (Bore Type Mill) SIC Type

                                [Features]· It is a tool with excellent abrasion resistance.
                                Více informací
                                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                Plane / Side / Groove63 ~ 100CopperArbor-----
                                Cena (bez DPH) od:
                                429.55 €
                                Běžné datum odeslání:
                                8 pracovních dnů
                                Konfigurovat
                              • Super End Chipper SEC Type - Standard Type, Medium-Long Type

                                  DIJET

                                  Super End Chipper SEC Type - Standard Type, Medium-Long Type

                                  Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.
                                  Více informací
                                  Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                  Side / Groove / Inclined Cuts / Vertical40 ~ 50CopperWith handle-160 ~ 17032 ~ 42--
                                  Cena (bez DPH) od:
                                  520.70 €
                                  Běžné datum odeslání:
                                  8 pracovních dnů
                                  Konfigurovat
                                • Super Die Mate HDM Type Bore Type Mill / Regular Type

                                    DIJET

                                    Super Die Mate HDM Type Bore Type Mill / Regular Type

                                    [Features]· Supports materials from cast iron and general steel to stainless steel, titanium, and inconel
                                    Více informací
                                    Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                    Plane / Groove / Vertical50 ~ 80CopperArbor---3 ~ 4-
                                    Cena (bez DPH) od:
                                    452.07 €
                                    Běžné datum odeslání:
                                    8 pracovních dnů
                                    Konfigurovat
                                  • CoroMill 329 Cutter

                                      SANDVIK

                                      CoroMill 329 Cutter

                                      Unique shape exhibits high performance
                                      Více informací
                                      Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                      Groove100CopperArborFinishing-226Carbide Coat
                                      Cena (bez DPH) od:
                                      1,350.12 €
                                      Běžné datum odeslání:
                                      8 pracovních dnů
                                      Konfigurovat
                                    • CoroMill 300 Cutter

                                        SANDVIK

                                        CoroMill 300 Cutter

                                        Suitable for high-efficiency machining.
                                        Více informací
                                        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                        Plane35 ~ 100CopperCentering PlugRough and medium rough processing--3 ~ 12-
                                        Cena (bez DPH) od:
                                        550.53 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • CoroMill 328 Cutter

                                          SANDVIK

                                          CoroMill 328 Cutter

                                          General purpose cutters for a wide range of grooving, threading and chamfering.
                                          Více informací
                                          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                          Groove / Chamfer39 ~ 44CopperWith handleFinishing125252 ~ 3Carbide Coat
                                          Cena (bez DPH) od:
                                          532.56 €
                                          Běžné datum odeslání:
                                          8 pracovních dnů
                                          Konfigurovat
                                        • CoroMill 390 Cutter

                                            SANDVIK

                                            CoroMill 390 Cutter

                                            Suitable for high-efficiency machining.
                                            Více informací
                                            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                            Plane / Side / Groove80 ~ 160CopperArborFinishing50 ~ 6325.4 ~ 50.87 ~ 12Carbide Coat
                                            Cena (bez DPH) od:
                                            1,063.34 €
                                            Běžné datum odeslání:
                                            8 pracovních dnů
                                            Konfigurovat
                                          • CoroMill 490 Cutter

                                              SANDVIK

                                              CoroMill 490 Cutter

                                              Suitable for high-efficiency machining.
                                              Více informací
                                              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                              Plane / Side / Groove40CopperWith handleRough and medium rough processing170324Carbide Coat
                                              Cena (bez DPH) od:
                                              694.80 €
                                              Běžné datum odeslání:
                                              8 pracovních dnů
                                              Konfigurovat
                                            • CoroMill 490 Long Edge Cutter

                                                SANDVIK

                                                CoroMill 490 Long Edge Cutter

                                                Suitable for high-efficiency machining.
                                                Více informací
                                                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                Plane / Side / Groove20 ~ 40CopperWith handleRough and medium rough processing / Finishing74 ~ 11216 ~ 322 ~ 6Carbide Coat
                                                Cena (bez DPH) od:
                                                458.31 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • CoroMill 590 Cutter

                                                  SANDVIK

                                                  CoroMill 590 Cutter

                                                  A light-cutting face mill suitable for high-speed finishing[Features]The tool is designed with a toothed interface for increased stability and reduced runout.
                                                  Více informací
                                                  Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                  Plane / Side63 ~ 160CopperArborFinishing40 ~ 6322 ~ 405 ~ 10Carbide Coat
                                                  Cena (bez DPH) od:
                                                  1,172.30 €
                                                  Běžné datum odeslání:
                                                  6 pracovních dnů
                                                  Konfigurovat
                                                • CoroMill R216 Ball End Mill

                                                    SANDVIK

                                                    CoroMill R216 Ball End Mill

                                                    Suitable for high-efficiency machining.
                                                    Více informací
                                                    Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                    Groove12 ~ 50CopperWith handleFinishing91 ~ 25720 ~ 502 ~ 4Carbide Coat
                                                    Cena (bez DPH) od:
                                                    490.92 €
                                                    Běžné datum odeslání:
                                                    6 pracovních dnů
                                                    Konfigurovat
                                                  • CoroMill 300 Profile Machining Milling Cutter

                                                      SANDVIK

                                                      CoroMill 300 Profile Machining Milling Cutter

                                                      Suitable for high-efficiency machining.
                                                      Více informací
                                                      Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                      Plane / Side25 ~ 40CopperWith handleRough and medium rough processing150 ~ 25020 ~ 323 ~ 5Carbide Coat
                                                      Cena (bez DPH) od:
                                                      496.55 €
                                                      Běžné datum odeslání:
                                                      8 pracovních dnů
                                                      Konfigurovat
                                                    • Sandvik, CoroMill 328 Grooving Cutter

                                                        SANDVIK

                                                        Sandvik, CoroMill 328 Grooving Cutter

                                                        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                        Groove / Chamfer63 ~ 80CopperArborFinishing-22 ~ 275 ~ 8Carbide Coat
                                                        Cena (bez DPH) od:
                                                        680.98 €
                                                        Běžné datum odeslání:
                                                        8 pracovních dnů
                                                        Konfigurovat
                                                      • End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

                                                          SANDVIK

                                                          End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

                                                          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                          Plane / Side / Groove20 ~ 100CopperCentering PlugRough and medium rough processing / Finishing--2 ~ 10-
                                                          Cena (bez DPH) od:
                                                          526.91 €
                                                          Běžné datum odeslání:
                                                          6 pracovních dnů
                                                          Konfigurovat
                                                        • End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18

                                                            SANDVIK

                                                            End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18

                                                            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                            Plane / Side / Groove40 ~ 84CopperCentering PlugRough and medium rough processing--3 ~ 6Carbide Coat
                                                            Cena (bez DPH) od:
                                                            606.75 €
                                                            Běžné datum odeslání:
                                                            6 pracovních dnů
                                                            Konfigurovat
                                                          • CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B

                                                              SANDVIK

                                                              CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B

                                                              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                              Plane12 ~ 25CopperWith handleFinishing109 ~ 14116 ~ 322-
                                                              Cena (bez DPH) od:
                                                              331.24 €
                                                              Běžné datum odeslání:
                                                              6 pracovních dnů
                                                              Konfigurovat
                                                            • CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

                                                                SANDVIK

                                                                CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Cylindrical Shank R300-A

                                                                [Features]Round-insert end millFor everything from roughing through to medium cutting and high-feed machiningFor profilingCoarse pitchCylindrical shank
                                                                Více informací
                                                                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                Plane10 ~ 32CopperWith handleFinishing160 ~ 25016 ~ 322-
                                                                Cena (bez DPH) od:
                                                                331.24 €
                                                                Běžné datum odeslání:
                                                                6 pracovních dnů
                                                                Konfigurovat
                                                              • CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32

                                                                  SANDVIK

                                                                  CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32

                                                                  Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                  Groove82 ~ 127CopperArborFinishing-27 ~ 406 ~ 10Carbide Coat
                                                                  Cena (bez DPH) od:
                                                                  1,620.03 €
                                                                  Běžné datum odeslání:
                                                                  6 pracovních dnů
                                                                  Konfigurovat
                                                                • CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

                                                                    SANDVIK

                                                                    CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

                                                                    Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.
                                                                    Více informací
                                                                    Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                    Groove82 ~ 127CopperArborFinishing-27 ~ 406 ~ 10Carbide Coat
                                                                    Cena (bez DPH) od:
                                                                    1,620.03 €
                                                                    Běžné datum odeslání:
                                                                    6 pracovních dnů
                                                                    Konfigurovat
                                                                  • CoroMill 390 End Mill Threaded-Type Coupling R390-T

                                                                      SANDVIK

                                                                      CoroMill 390 End Mill Threaded-Type Coupling R390-T

                                                                      [Features]Rivals the performance of solid end millsHigh precisionNo miss-matchesShoulder cuttingGroovingProfilingHelical machiningLappingCan be used for all types of machiningThreaded-type coupling
                                                                      Více informací
                                                                      Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                      Plane / Side / Groove16 ~ 42CopperCentering PlugRough and medium rough processing / Finishing-8 ~ 162 ~ 4Carbide Coat
                                                                      Cena (bez DPH) od:
                                                                      421.31 €
                                                                      Běžné datum odeslání:
                                                                      6 pracovních dnů
                                                                      Konfigurovat
                                                                    • CoroMill 490 Shoulder Cutting Face Milling HSK 490-HA

                                                                        SANDVIK

                                                                        CoroMill 490 Shoulder Cutting Face Milling HSK 490-HA

                                                                        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                        Plane / Side / Groove20  ~ 80 CopperCentering PlugRough and medium rough processing / Finishing-482 ~ 8Carbide Coat
                                                                        Cena (bez DPH) od:
                                                                        460.57 €
                                                                        Běžné datum odeslání:
                                                                        6 pracovních dnů
                                                                        Konfigurovat
                                                                      • CoroMill 590 Cutter For Face Milling Machining Of Aluminium Alloy, Cast Iron, High-Hardness Steel Steel HSK R590-HA

                                                                          SANDVIK

                                                                          CoroMill 590 Cutter For Face Milling Machining Of Aluminium Alloy, Cast Iron, High-Hardness Steel Steel HSK R590-HA

                                                                          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                          -50 ~ 80CopperCentering PlugFinishing-484 ~ 6Carbide Coat
                                                                          Cena (bez DPH) od:
                                                                          1,136.45 €
                                                                          Běžné datum odeslání:
                                                                          6 pracovních dnů
                                                                          Konfigurovat
                                                                        • CoroMill 590 Cutter For Face Milling Machining Of Aluminium Alloy, Cast Iron, High-Hardness Steel Coromant Capto R590-C

                                                                            SANDVIK

                                                                            CoroMill 590 Cutter For Face Milling Machining Of Aluminium Alloy, Cast Iron, High-Hardness Steel Coromant Capto R590-C

                                                                            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                            -40 ~ 80CopperCentering PlugFinishing-22 ~ 443 ~ 6Carbide Coat
                                                                            Cena (bez DPH) od:
                                                                            868.79 €
                                                                            Běžné datum odeslání:
                                                                            6 pracovních dnů
                                                                            Konfigurovat
                                                                          • CoroMill 325 Thread Whirling Cutter 325-12-16M

                                                                              SANDVIK

                                                                              CoroMill 325 Thread Whirling Cutter 325-12-16M

                                                                              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                              -12 ~ 20Copper---32 ~ 526-
                                                                              Cena (bez DPH) od:
                                                                              1,203.92 €
                                                                              Běžné datum odeslání:
                                                                              6 pracovních dnů
                                                                              Konfigurovat
                                                                            • CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327

                                                                                SANDVIK

                                                                                CoroMill 327 Coromant Capto Short, Without Gripper Groove C-391.327

                                                                                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                Plane / Groove-CopperCentering PlugRough and medium rough processing---Diamond (PCD)
                                                                                Cena (bez DPH) od:
                                                                                375.63 €
                                                                                Běžné datum odeslání:
                                                                                6 pracovních dnů
                                                                                Konfigurovat
                                                                              • CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327

                                                                                  SANDVIK

                                                                                  CoroMill 327 ER For Rotary Tools, Integrated Collet Type 392.ER327

                                                                                  Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                  Groove / Chamfer-CopperCentering PlugFinishing----
                                                                                  Cena (bez DPH) od:
                                                                                  476.30 €
                                                                                  Běžné datum odeslání:
                                                                                  6 pracovních dnů
                                                                                  Konfigurovat
                                                                                • CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q

                                                                                    SANDVIK

                                                                                    CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q

                                                                                    Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                    Plane77.08  ~ 174.08 CopperArborFinishing45 ~ 6322 ~ 407 ~ 16-
                                                                                    Cena (bez DPH) od:
                                                                                    1,034.11 €
                                                                                    Běžné datum odeslání:
                                                                                    6 pracovních dnů
                                                                                    Konfigurovat
                                                                                  • CoroMill 360 Face Milling Cutter For Heavy-Duty Cutting, Right-Handed

                                                                                      SANDVIK

                                                                                      CoroMill 360 Face Milling Cutter For Heavy-Duty Cutting, Right-Handed

                                                                                      Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                      Plane160CopperArborRough and medium rough processing80406-
                                                                                      Cena (bez DPH) od:
                                                                                      2,452.23 €
                                                                                      Běžné datum odeslání:
                                                                                      6 pracovních dnů
                                                                                      Konfigurovat
                                                                                    • CoroMill 790 (Aluminium End Mill) Shoulder Cutting / End Mill Coromant Capto R790-C

                                                                                        SANDVIK

                                                                                        CoroMill 790 (Aluminium End Mill) Shoulder Cutting / End Mill Coromant Capto R790-C

                                                                                        Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                        Side25 ~ 100CopperArbor / Centering PlugFinishing-22 ~ 552 ~ 9Carbide Coat
                                                                                        Cena (bez DPH) od:
                                                                                        932.90 €
                                                                                        Běžné datum odeslání:
                                                                                        6 pracovních dnů
                                                                                        Konfigurovat
                                                                                      • CoroMill 790 (Aluminium End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A

                                                                                          SANDVIK

                                                                                          CoroMill 790 (Aluminium End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A

                                                                                          Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                          Side25 ~ 40CopperWith handleFinishing125 ~ 15025 ~ 322 ~ 3Carbide Coat
                                                                                          Cena (bez DPH) od:
                                                                                          847.42 €
                                                                                          Běžné datum odeslání:
                                                                                          6 pracovních dnů
                                                                                          Konfigurovat
                                                                                        • CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A

                                                                                            SANDVIK

                                                                                            CoroMill R216F Ball End Mill For Finishing, Steel & Carbide Cylindrical Shank, R216F-A

                                                                                            Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                            Plane / Side / Groove8 ~ 30/32CopperWith handleRough and medium rough processing83 ~ 24012 ~ 32-Carbide Coat
                                                                                            Cena (bez DPH) od:
                                                                                            430.20 €
                                                                                            Běžné datum odeslání:
                                                                                            6 pracovních dnů
                                                                                            Konfigurovat
                                                                                          • CoroMill R216 Ball End Mill Threaded Coupling R216-T

                                                                                              SANDVIK

                                                                                              CoroMill R216 Ball End Mill Threaded Coupling R216-T

                                                                                              Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                              Groove10 ~ 32CopperCentering PlugFinishing--2Carbide Coat
                                                                                              Cena (bez DPH) od:
                                                                                              490.92 €
                                                                                              Běžné datum odeslání:
                                                                                              6 pracovních dnů
                                                                                              Konfigurovat
                                                                                            • CoroMill R216 Ball End Mill Coromant Capto R216-C

                                                                                                SANDVIK

                                                                                                CoroMill R216 Ball End Mill Coromant Capto R216-C

                                                                                                Machining Applicationblade diameter D(mm)work materialMounting MethodFinish categoryOverall length (L)(mm)Shank diameter (d)(mm)Number of flutes(sheet)Compatible Tip Material
                                                                                                Groove30 ~ 50Copper-Finishing---Carbide Coat
                                                                                                Cena (bez DPH) od:
                                                                                                866.55 €
                                                                                                Běžné datum odeslání:
                                                                                                6 pracovních dnů
                                                                                                Konfigurovat