Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Available corners
  • Turning Inserts

      • T-MaxP Insert X-Line WNMG

          SANDVIK

          T-MaxP Insert X-Line WNMG

          [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Hex 80° insert· Negative insert
          Více informací
          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
          W (Hexagonal Type)Outer Diameter/Inner Diameter6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 1.2-
          Cena (bez DPH) od:
          22.35 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • T-MaxP Insert X-Line CNMG

            SANDVIK

            T-MaxP Insert X-Line CNMG

            [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 80° insert· Negative insert
            Více informací
            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
            C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness MaterialFinish / Medium grindingNegativeNo-hand0.4 ~ 1.6-
            Cena (bez DPH) od:
            14.83 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • CoroTurn 107 Diamond Shaped 35°

              SANDVIK

              CoroTurn 107 Diamond Shaped 35°

              [Features]Carbide-coated insert for outer-diameter machining of small componentsLeft/right handed insertDiamond-shaped 35° insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
              Více informací
              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
              V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
              Cena (bez DPH) od:
              19.30 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • T-MaxP Insert X-Line DNMG

                SANDVIK

                T-MaxP Insert X-Line DNMG

                [Features]· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters· Diamond-shaped 55° insert· Negative insert
                Více informací
                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 0.8-
                Cena (bez DPH) od:
                27.58 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Carbide Insert CCMT

                  WIDIA

                  Carbide Insert CCMT【10 kusů】

                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                  C (80° Diamond-Shape)--Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material-Pozidriv---
                  Cena (bez DPH) od:
                  15.86 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Diamond Shape 35° / Positive with Hole VPGT

                    KYOCERA

                    Diamond Shape 35° / Positive with Hole VPGT

                    [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                    Více informací
                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                    V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2Stainless SteelFinishPozidrivNo-handOther-
                    Cena (bez DPH) od:
                    16.51 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Outer Diameter Grooving Tip GBA32 / GBA43

                      KYOCERA

                      Outer Diameter Grooving Tip GBA32 / GBA43

                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                      OtherGrooving / Parting-Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--Right-hand / Left-hand0.2 ~ Other-
                      Cena (bez DPH) od:
                      20.07 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                      • OSG

                        EcoCut Insert XCNT / XCET

                        [Features]· 4 tools in one. Flattening the bases of holes. High-efficiency machining of internal diameters.
                        Více informací
                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                        Other--Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand / No-hand--
                        Cena (bez DPH) od:
                        11.77 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • SANDVIK CoroThread 266 Insert for Thread Turning

                          SANDVIK

                          SANDVIK CoroThread 266 Insert for Thread Turning

                          [Specifications]・Work material: Steel, Stainless Steel, Cast Iron, Non-ferrous metal, Heat-resistant alloy, titanium alloy, High Hardness Material・Cutting Direction: Right-hand, Left-hand・Grade type: CBN, Hard metal・eClass-5.1: 21011901, 21011902[Features]・Optimize your tool path・iLock interface・Precision coolant solution
                          Více informací
                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                          ---Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--Right-hand / Left-hand--
                          Cena (bez DPH) od:
                          44.08 €
                          Běžné datum odeslání:
                          5 pracovních dnů
                          Konfigurovat
                        • Ceramic Tip (for Turning)

                            SANDVIK

                            Ceramic Tip (for Turning)

                            Unique shape exhibits high performance
                            Více informací
                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                            T (Triangle)Outer Diameter/Inner Diameter3Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material-NegativeNo-hand0.8 ~ 1.2-
                            Cena (bez DPH) od:
                            22.67 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI

                              OSG

                              Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI

                              OSG Bit (for Milling) Planet Cutter Series Insert for High Pro Planet Cutter Series PC-CTI
                              Více informací
                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                              OtherThreading-Steel / Non-ferrous metal-----
                              Cena (bez DPH) od:
                              23.04 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Inner Diameter Thread Cutting Tip 11IR / L○○ISO-TF
                              • Volume Discount

                              KYOCERA

                              Inner Diameter Thread Cutting Tip 11IR / L○○ISO-TF

                              Metric Thread (M) with Flat Blade 60°
                              Více informací
                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                              T (Triangle)Threading3Steel / Stainless Steel-PozidrivRight-handOtherInternal Diameter
                              Cena (bez DPH) od:
                              14.41 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                                SANDVIK

                                CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade

                                [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor 55° Whitworth threadsMachining pitch: for 5 threads
                                Více informací
                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                Cena (bez DPH) od:
                                43.78 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                                  SANDVIK

                                  T-Max P Negative Insert For Turning (Triangular Shaped 60°)

                                  [Features]Carbide-coated insertTriangular-shaped insertNegative insertFor machining general steel and low-carbon steelFor finishing
                                  Více informací
                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                  T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeRight-hand / No-hand0.2 ~ Other-
                                  Cena (bez DPH) od:
                                  10.75 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • CoroCut 1 / 2 For Parting

                                    SANDVIK

                                    CoroCut 1 / 2 For Parting

                                    [Features]CoroCut 2 insertsSolid carbide-coated tipFor parting and groovingThe rail lock provides high clamp rigidity2-cutting-edge specificationFor partingFor high-feed machiningSeat size: GWidth: 3.0 mm
                                    Více informací
                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                    OtherGrooving / Parting2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand / No-hand0.2 ~ Other-
                                    Cena (bez DPH) od:
                                    40.69 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • CoroTurn 107 Triangular Shaped 60°

                                      SANDVIK

                                      CoroTurn 107 Triangular Shaped 60°

                                      [Features]Carbide-coated insert for outer-diameter machining of small componentsPrecision classTriangular-shaped insertLeft/right handed insertPositive insertFor general engineering and machining heat-resistant alloysFor finishing
                                      Více informací
                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                      T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivRight-hand / Left-hand / No-hand0.2 ~ Other-
                                      Cena (bez DPH) od:
                                      11.41 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                                        SANDVIK

                                        T-Max P Negative Insert For Turning (Hexagonal Shaped 80°)

                                        [Features]Carbide-coated insertHexagonal-shaped 80° insertNegative insertFor machining general steel and stainless steelFor semi-finishing
                                        Více informací
                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                        W (Hexagonal Type)Outer Diameter/Inner Diameter4 / 6Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ 1.6-
                                        Cena (bez DPH) od:
                                        16.40 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • Carmex Thread Cutting Tip (TRAPEZ / for Trapezoidal Screw)

                                          NOGAJAPAN

                                          Carmex Thread Cutting Tip (TRAPEZ / for Trapezoidal Screw)

                                          [Features]· BMA: Ultra-fine particle carbide with TiAlN coating. Versatile grade that can be used for difficult-to-cut materials at medium to high speed ranges.[Applications]· Pitch For Threading
                                          Více informací
                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                          ---------
                                          Cena (bez DPH) od:
                                          28.46 €
                                          Běžné datum odeslání:
                                          6 pracovních dnů
                                          Konfigurovat
                                        • Kyocera Turning Insert PV720 PVD Cermet

                                            KYOCERA

                                            Kyocera Turning Insert PV720 PVD Cermet

                                            [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                            Více informací
                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                            ----Finish----
                                            Cena (bez DPH) od:
                                            7.61 €
                                            Běžné datum odeslání:
                                            8 pracovních dnů
                                            Konfigurovat
                                          • Kyocera Cutting Insert PR1535 PVD Coating

                                              KYOCERA

                                              Kyocera Cutting Insert PR1535 PVD Coating

                                              [Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.[Applications]· For Cutting Off· PR1535: Stainless steel cutoff machining (foremost recommended material)
                                              Více informací
                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                              ---------
                                              Cena (bez DPH) od:
                                              21.58 €
                                              Běžné datum odeslání:
                                              6 pracovních dnů
                                              Konfigurovat
                                            • CORO-TURN
                                              • Volume Discount

                                              SANDVIK

                                              CORO-TURN

                                              Unique shape exhibits high performance
                                              Více informací
                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                              D (55° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivNo-hand0.2 ~ Other-
                                              Cena (bez DPH) od:
                                              14.94 €
                                              Běžné datum odeslání:
                                              6 pracovních dnů
                                              Konfigurovat
                                            • Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"
                                              • Volume Discount

                                              KYOCERA

                                              Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"

                                              [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                              Více informací
                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                              C (80° Diamond-Shape)Outer Diameter/Inner Diameter2SteelMedium grindingPozidrivNo-hand0.4-
                                              Cena (bez DPH) od:
                                              7.84 €
                                              Běžné datum odeslání:
                                              6 pracovních dnů
                                              Konfigurovat
                                            • Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                                KYOCERA

                                                Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"

                                                [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                Více informací
                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast IronMedium grindingPozidrivNo-hand0.2 ~ Other-
                                                Cena (bez DPH) od:
                                                14.21 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving

                                                  SANDVIK

                                                  T-Max Q-Cut (151.3 Type) For Inner Diameter Grooving

                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                  OtherGrooving / Parting1Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--No-hand0.2 ~ Other-
                                                  Cena (bez DPH) od:
                                                  22.98 €
                                                  Běžné datum odeslání:
                                                  6 pracovních dnů
                                                  Konfigurovat
                                                • CoroThread 266 Metric 60° With Finishing Blade

                                                    SANDVIK

                                                    CoroThread 266 Metric 60° With Finishing Blade

                                                    [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor metric threadsMachining pitch: for 5.0 mm
                                                    Více informací
                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                    T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyFinish-Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                    Cena (bez DPH) od:
                                                    43.93 €
                                                    Běžné datum odeslání:
                                                    6 pracovních dnů
                                                    Konfigurovat
                                                  • ISO Trapezoid 30° Thread Crest, With Chamfering Blade

                                                      SANDVIK

                                                      ISO Trapezoid 30° Thread Crest, With Chamfering Blade

                                                      [Features]CoroThread 266, insert for threadingSolid carbide-coated insertNewly designed inserts with improved ease of mounting and a guide rail with high clamp rigidityFor outer-diameter threadingFor trapezoidal 30° threadsMachining pitch: for 8 mm
                                                      Více informací
                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                      T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                      Cena (bez DPH) od:
                                                      56.75 €
                                                      Běžné datum odeslání:
                                                      6 pracovních dnů
                                                      Konfigurovat
                                                    • STUB-ACME 29° Thread Crest, With Chamfering Blade

                                                        SANDVIK

                                                        STUB-ACME 29° Thread Crest, With Chamfering Blade

                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                        T (Triangle)Threading3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand-Outer Diameter / Internal Diameter
                                                        Cena (bez DPH) od:
                                                        56.75 €
                                                        Běžné datum odeslání:
                                                        6 pracovních dnů
                                                        Konfigurovat
                                                      • T-Max P Negative Insert For Turning (Square Shaped 90°)

                                                          SANDVIK

                                                          T-Max P Negative Insert For Turning (Square Shaped 90°)

                                                          [Features]Carbide-coated insertSquare-shaped insertNegative insertFor machining general steelFor semi-finishing
                                                          Více informací
                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                          S (Rectangular)Outer Diameter/Inner Diameter4Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingNegativeNo-hand0.4 ~ Other-
                                                          Cena (bez DPH) od:
                                                          10.77 €
                                                          Běžné datum odeslání:
                                                          6 pracovních dnů
                                                          Konfigurovat
                                                        • T-Max Insert For Turning

                                                            SANDVIK

                                                            T-Max Insert For Turning

                                                            [Features]T-Max S, carbide-coated insert for general machiningPrecision classSquare-shaped insertPositive insertFor general steel machiningWithout breaker
                                                            Více informací
                                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                            S (Rectangular) / T (Triangle)Outer Diameter/Inner Diameter3 / 4Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--No-hand0.4 ~ Other-
                                                            Cena (bez DPH) od:
                                                            8.53 €
                                                            Běžné datum odeslání:
                                                            6 pracovních dnů
                                                            Konfigurovat
                                                          • CoroCut 3 For Grooving / Profiling

                                                              SANDVIK

                                                              CoroCut 3 For Grooving / Profiling

                                                              [Features]CoroCut 3 insert3-cutting-edge specificationCarbide-coated insertFor shallow groovingFor profilingFull RGroove width: 1.5 mm
                                                              Více informací
                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                              T (Triangle)Grooving / Parting3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--No-hand0.4 ~ Other-
                                                              Cena (bez DPH) od:
                                                              70.77 €
                                                              Běžné datum odeslání:
                                                              6 pracovních dnů
                                                              Konfigurovat
                                                            • CoroCut XS Insert For Front Turning / Back Turning

                                                                SANDVIK

                                                                CoroCut XS Insert For Front Turning / Back Turning

                                                                [Features]CoroCut XS insertFor outer-diameter machining of small componentsCarbide-coated insertFor back turningNose R: 0.20 mm
                                                                Více informací
                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                OtherOuter Diameter/Inner Diameter2Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand0.2 ~ OtherOuter Diameter
                                                                Cena (bez DPH) od:
                                                                54.08 €
                                                                Běžné datum odeslání:
                                                                6 pracovních dnů
                                                                Konfigurovat
                                                              • CoroTurn 107 Round Insert For Turning

                                                                  SANDVIK

                                                                  CoroTurn 107 Round Insert For Turning

                                                                  [Features]Carbide-coated insert for outer-diameter machining of small componentsRound insertPositive insertFor machining heat-resistant alloysFor semi-finishing
                                                                  Více informací
                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                  R (Circular)Outer Diameter/Inner Diameter1Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloyMedium grindingPozidrivNo-handOther-
                                                                  Cena (bez DPH) od:
                                                                  12.67 €
                                                                  Běžné datum odeslání:
                                                                  6 pracovních dnů
                                                                  Konfigurovat
                                                                • Kyocera Turning Insert CA530 CVD Coating

                                                                    KYOCERA

                                                                    Kyocera Turning Insert CA530 CVD Coating

                                                                    [Features]· CA530: Special tough substrate with high stability and tough coating with excellent abrasion resistance.· Supports general to heavy intermittent machining of steel (with a focus on stability).[Applications]· For lathe turning· CA530: Supports general purpose to heavy intermittent machining of steel (focus on stability)
                                                                    Více informací
                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                    ----Finish----
                                                                    Cena (bez DPH) od:
                                                                    8.14 €
                                                                    Běžné datum odeslání:
                                                                    8 pracovních dnů
                                                                    Konfigurovat
                                                                  • Kyocera Turning Insert PV720 PVD Cermet

                                                                      KYOCERA

                                                                      Kyocera Turning Insert PV720 PVD Cermet

                                                                      [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                                                      Více informací
                                                                      ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                      ----Finish / Medium grinding / Light Cutting----
                                                                      Cena (bez DPH) od:
                                                                      9.09 €
                                                                      Běžné datum odeslání:
                                                                      8 pracovních dnů
                                                                      Konfigurovat
                                                                    • Kyocera Turning Insert PV720 PVD Cermet

                                                                        KYOCERA

                                                                        Kyocera Turning Insert PV720 PVD Cermet

                                                                        [Features]· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.· Realizes both high-efficiency machining and a high-grade finished surface.[Applications]· For lathe turning· PV720: The foremost recommended PVD cermet for steel machining
                                                                        Více informací
                                                                        ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                        ----Finish----
                                                                        Cena (bez DPH) od:
                                                                        12.03 €
                                                                        Běžné datum odeslání:
                                                                        8 pracovních dnů
                                                                        Konfigurovat
                                                                      • SANDVIK CoroThread 266 Insert for Grooving

                                                                          SANDVIK

                                                                          SANDVIK CoroThread 266 Insert for Grooving

                                                                          [Specifications]・Work material: Steel, Stainless Steel, Cast Iron, Non-ferrous metal, Heat-resistant alloy, titanium alloy・Insert shape: CoroThread 254・Cutting Direction: Right-hand, Left-hand・Grade type: Hard metal・Suitable for which type of machining?: Groove turning・Insert type: Insert with bore and geometry・eClass-5.1: 21011902[Features]・Optimize your tool path・iLock interface・Precision coolant solution・For grooving
                                                                          Více informací
                                                                          ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                          ---Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy--Right-hand / Left-hand--
                                                                          Cena (bez DPH) od:
                                                                          39.77 €
                                                                          Běžné datum odeslání:
                                                                          5 pracovních dnů
                                                                          Konfigurovat
                                                                        • Outer Diameter Threading Tool Holder KTT Type, Compatible Chip

                                                                            KYOCERA

                                                                            Outer Diameter Threading Tool Holder KTT Type, Compatible Chip

                                                                            Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
                                                                            Více informací
                                                                            ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                            T (Triangle)Threading-Steel / Stainless Steel--Right-hand / Left-hand0.2 ~ Other-
                                                                            Cena (bez DPH) od:
                                                                            30.77 €
                                                                            Běžné datum odeslání:
                                                                            6 pracovních dnů
                                                                            Konfigurovat
                                                                          • Positive Tip for T-Max S Turning Tool

                                                                              SANDVIK

                                                                              Positive Tip for T-Max S Turning Tool

                                                                              Unique shape exhibits high performance
                                                                              Více informací
                                                                              ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                              T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material--No-hand0.2 ~ 1.2-
                                                                              Cena (bez DPH) od:
                                                                              9.65 €
                                                                              Běžné datum odeslání:
                                                                              6 pracovních dnů
                                                                              Konfigurovat
                                                                            • CORO-TURN 107 Positive Tip for Machining

                                                                                SANDVIK

                                                                                CORO-TURN 107 Positive Tip for Machining

                                                                                Unique shape exhibits high performance
                                                                                Více informací
                                                                                ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                C (80° Diamond-Shape) / S (Rectangular)Outer Diameter/Inner Diameter2 / 4Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloyFinish / Medium grindingPozidrivNo-hand0.2 ~ Other-
                                                                                Cena (bez DPH) od:
                                                                                14.32 €
                                                                                Běžné datum odeslání:
                                                                                6 pracovních dnů
                                                                                Konfigurovat
                                                                              • CERATIZIT HYPERCOAT Tip

                                                                                  OSG

                                                                                  CERATIZIT HYPERCOAT Tip

                                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                  C (80° Diamond-Shape)Other-Steel / Stainless Steel / Cast Iron-NegativeNo-hand0.8-
                                                                                  Cena (bez DPH) od:
                                                                                  8.42 €
                                                                                  Běžné datum odeslání:
                                                                                  6 pracovních dnů
                                                                                  Konfigurovat
                                                                                • 80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting"
                                                                                  • Volume Discount

                                                                                  KYOCERA

                                                                                  80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting"

                                                                                  [Specifications]· Shape: W (Hexagon)· Number of Available Corners: 6· Rake Angle: Negative· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                  Více informací
                                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                  W (Hexagonal Type)Outer Diameter/Inner Diameter6SteelMedium grindingNegativeNo-hand0.8-
                                                                                  Cena (bez DPH) od:
                                                                                  8.67 €
                                                                                  Běžné datum odeslání:
                                                                                  6 pracovních dnů
                                                                                  Konfigurovat
                                                                                • Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
                                                                                  • Volume Discount

                                                                                  KYOCERA

                                                                                  Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"

                                                                                  [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                  Více informací
                                                                                  ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                  C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Heat-resistant alloy, titanium alloyMedium grindingPozidrivNo-hand0.4 ~ 0.8-
                                                                                  Cena (bez DPH) od:
                                                                                  7.73 €
                                                                                  Běžné datum odeslání:
                                                                                  6 pracovních dnů
                                                                                  Konfigurovat
                                                                                • Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"

                                                                                    KYOCERA

                                                                                    Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"

                                                                                    [Specifications]· Shape: C (80° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                    Více informací
                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    C (80° Diamond-Shape)Outer Diameter/Inner Diameter2Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloyMedium grindingPozidrivRight-hand / Left-hand0.2 ~ Other-
                                                                                    Cena (bez DPH) od:
                                                                                    14.21 €
                                                                                    Běžné datum odeslání:
                                                                                    6 pracovních dnů
                                                                                    Konfigurovat
                                                                                  • 60° Triangle Positive without Hole TPMR "Medium Cutting"
                                                                                    • Volume Discount

                                                                                    KYOCERA

                                                                                    60° Triangle Positive without Hole TPMR "Medium Cutting"

                                                                                    [Specifications]· Shape: T (Triangle)· Number of Available Corners: 3· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Medium Cutting
                                                                                    Více informací
                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    T (Triangle)Outer Diameter/Inner Diameter3Steel / Stainless Steel / Cast IronMedium grindingPozidrivNo-hand0.4 ~ 0.8-
                                                                                    Cena (bez DPH) od:
                                                                                    5.43 €
                                                                                    Běžné datum odeslání:
                                                                                    6 pracovních dnů
                                                                                    Konfigurovat
                                                                                  • Diamond Shape 35° / Positive with Hole VBMT
                                                                                    • Volume Discount

                                                                                    KYOCERA

                                                                                    Diamond Shape 35° / Positive with Hole VBMT

                                                                                    [Specifications]· Shape: V (35° Rhombus)· Number of Available Corners: 2· Rake Angle: Positive· Handedness: No handedness[Applications]· Machining Applications: For Outer Diameter / Inner Diameter· Breaker Application: Finishing
                                                                                    Více informací
                                                                                    ShapeApplicationAvailable cornerswork materialBreaker UseRake angleCutting DirectionNose RO.D./ I.D. (For Threading)
                                                                                    V (35° Diamond-Shaped)Outer Diameter/Inner Diameter2SteelFinish / Medium grindingPozidrivNo-hand0.2 ~ 0.8-
                                                                                    Cena (bez DPH) od:
                                                                                    13.20 €
                                                                                    Běžné datum odeslání:
                                                                                    6 pracovních dnů
                                                                                    Konfigurovat