Holding Tools for O.D. Tuning

• 

  SANDVIK

  SANDVIK T-Max Shank Tool for Turning

  [Specifications]・Type: Shank tool・Cutting Direction: Right-hand, Left-hand, No-hand・No coolant・eClass-5.1: 21010903

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	25 ～ 50	25 ～ 40

  Běžná cena (bez DPH):

  244.08 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR / L-S

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face / Chamfer	Clamp-on	Right-hand / Left-hand	Pozidriv	8 ～ 16	8 ～ 16

  Běžná cena (bez DPH):

  146.13 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter / Profiling	Clamp-on	Right-hand	-	12 ～ 16	12 ～ 16

  Běžná cena (bez DPH):

  207.85 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Holder for Outer Diameter Machining STFCR/L, STGCR/L

  [Features] Can be used for external machining.[Features] A screwable type that can firmly fix the insert.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Screw-on	Right-hand / Left-hand	-	12 ～ 25	12 ～ 25

  Běžná cena (bez DPH):

  94.18 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face / Chamfer	Lever lock	No-hand	-	-	-

  Běžná cena (bez DPH):

  1,007.71 €

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Heavy Cutting - Railway Wheel Correction Turning, Holder For Cutting Head, For Single Blade, L175.32-M

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  -	-	-	Right-hand / Left-hand	-	50	47

  Běžná cena (bez DPH):

  565.28 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MWLNR/L

  Negative for Outer Diameter and End Face Cutting

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter / End Face	Other	Right-hand / Left-hand	Negative	20 ～ 25	20 ～ 25

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Holder for Outer Diameter Machining PCLNR/L

  [Features]· Lever Lock Type· Approach Angle: 95° · Turning Insert Diamond 80°, Negative Type Insert Used

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face	Lever lock	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 32

  Běžná cena (bez DPH):

  122.64 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Holder for Outer Diameter Machining PDJNR/L

  [Features]· Lever Clamp Type· Approach Angle: 93°· Turning Insert Diamond 55°, Negative Type Insert Used

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / Profiling	Lever lock	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 25

  Běžná cena (bez DPH):

  122.64 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Tool Block SGTBR/L (Simple Mounting Type)

  Easy to mount tool block. For fixing.The blade can be replaced with 1 screw.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter / End Face / Profiling	Other	Right-hand / Left-hand	-	19 ～ 25	-

  Běžná cena (bez DPH):

  197.47 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Holder for Outer Diameter Machining (Screw Clamp) SCLCR/L

  Various inserts can be mounted.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Screw-on	Right-hand / Left-hand	-	8 ～ 25	8 ～ 25

  Běžná cena (bez DPH):

  94.18 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  CORO-TURN RC, Shank Bit for Negative Tips

  Unique shape exhibits high performance

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face / Chamfer	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 32

  Běžná cena (bez DPH):

  150.12 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Lever lock	Left-hand	Negative	16 ～ 25	16 ～ 25

  Běžná cena (bez DPH):

  135.66 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  T-Max P Cutting Unit For Turning, C-PCLNR / L-12HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face / Chamfer	-	Right-hand / Left-hand	-	-	-

  Běžná cena (bez DPH):

  929.70 €

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  T-Max S Shank Tool Bit For Turning, CSDPR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter / Post-Grinding	Clamp-on	Right-hand / Left-hand	-	20 ～ 25	20 ～ 25

  Běžná cena (bez DPH):

  167.09 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / Profiling / Chamfer	Lever lock	Right-hand / Left-hand	-	-	-

  Běžná cena (bez DPH):

  547.81 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding	Cable clamp	Left-hand	-	-	-

  Běžná cena (bez DPH):

  617.16 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face / Chamfer	-	No-hand	-	-	-

  Běžná cena (bez DPH):

  687.53 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / Profiling	Clamp-on	Right-hand	Pozidriv	-	-

  Běžná cena (bez DPH):

  160.43 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	Right-hand / Left-hand	-	25	25

  Běžná cena (bez DPH):

  241.61 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter / Profiling / Chamfer	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Běžná cena (bez DPH):

  345.98 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter / Post-Grinding	Cable clamp	No-hand	Negative	16 ～ 40	16 ～ 40

  Běžná cena (bez DPH):

  126.98 €～

  Běžná cena (bez DPH):

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DVPNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter / Profiling / Chamfer	Cable clamp	Right-hand / Left-hand	Negative	25 ～ 40	25 ～ 40

  Běžná cena (bez DPH):

  174.18 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter / End Face	Cable clamp	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 32

  Běžná cena (bez DPH):

  135.05 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13MCL

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / End Face / Profiling	Clamp-on	Left-hand	Pozidriv	-	-

  Běžná cena (bez DPH):

  443.03 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  SANDVIK CoroPlex TT Multifunctional Tool for Turning

  [Specifications]・Type: Cutting head・Cutting Direction: Left-hand・eClass-5.1: 21010903[Features]・Flexible tool holders optimized in length, stability・Coolant solution for multi-task machines・Quick change and modularity with Coromant Capto・CoroTurn RC insert clamping system with wide flexibility

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  -	-	-	Left-hand	-	-	-

  Běžná cena (bez DPH):

  1,007.00 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  SANDVIK CoroTurn 300 Cutting Unit for Turning

  [Specifications]・Type: Capto Cutting Unit・Cutting Direction: Right-hand, Left-hand, No-hand・No coolant・eClass-5.1: 21010903The clamp combined with the insert seat makes the insert self-locking.Effective and high-quality turning.[Features]・Geometries –L4 and -M5 are designed for excellent chip breaking within their respective application areas・Inserts in steel grades GC4425 and GC4415 with second generation Inveio technology for high wear resistance and long tool life・Stable iLock insert clamping and tight tolerances ensure high accuracy and indexing repeatability (within ±0.05 mm (±.002 inch))・The shim functions to maintain distance between the insert and tool holder, protecting the tool holder

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  Běžná cena (bez DPH):

  524.69 €～

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type H TAC Tool Bit for Outer Diameter, Retractable Pin Type HSRNR/L

  Negative for Outer Diameter Cutting

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Other	Right-hand / Left-hand	Negative	40 ～ 50	40 ～ 50

  Běžná cena (bez DPH):

  382.93 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Screw On Type MVVNN

  Negative for Outer Diameter and Profiling Milling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Profiling	Other	No-hand	Negative	20 ～ 32	20 ～ 25

  Běžná cena (bez DPH):

  161.61 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MTQNR/L

  Negative for Profiling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Profiling	Other	Right-hand	Negative	20 ～ 25	20 ～ 25

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVJNR/L

  Negative for Outer Diameter and Profiling Milling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Profiling	Other	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 32

  Běžná cena (bez DPH):

  161.61 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MVQNR/L

  Negative for Profiling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Profiling	Other	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 32

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  S-Type TAC Tool Bit for Outer Diameter, Screw-On Type SRACR/L

  Positive for Outer Diameter and Profiling Milling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	Outer Diameter / Profiling	Screw-on	Right-hand / Left-hand	Pozidriv	-	-

  Běžná cena (bez DPH):

  124.95 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Outer Diameter Machining Cutting Bit PTGNR/L Model

  Lever clamp type, outer diameter machining tool, approach angle: 91°, negative type insert used.[Features]· Uses an economical negative type insert. Lever lock type, which implements high holding force with easy operation.[Applications]· For outer diameter machining.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Lever lock	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 25

  Běžná cena (bez DPH):

  122.64 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Turning A, One/Double Type DCLNR/L

  Negative for Outer Diameter and End Face Cutting

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter / End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 25

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Turning A, One/Double Type DDJNR/L

  Negative for Outer Diameter and Profiling Milling

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter / Profiling	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 25

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TUNGALOY

  Turning A, One/Double Type DWLNR/L

  Negative for Outer Diameter and End Face Cutting

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter / End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 25

  Běžná cena (bez DPH):

  123.65 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Tool Block SGTBF (Right-Angle Type)

  [Features] -Right-angled tool block.[Features] -Cut-off, deep grooving, flange grooving.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter / End Face	Other	No-hand	-	25 ～ 32	-

  Běžná cena (bez DPH):

  238.05 €

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Tool Block SGTBN

  [Features] Clamping wedge, removable tool block.[Features] For fixing.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter	Other	No-hand	-	16 ～ 50	-

  Běžná cena (bez DPH):

  270.00 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Tool Block SGTBU (Clamp Division Type, CNC Lathe)

  [Features] Clamping wedge removable tool block.[Features] For fastening.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter	Other	No-hand	-	16 ～ 50	-

  Běžná cena (bez DPH):

  338.21 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  HELI GRIP, DO-GRIP, Blade for Grooving, Multifunction Machining

  [Features] Integrated pliers holder for parting off and grooving with newly developed clamping method.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter	Other	No-hand	-	26 ～ 45	1 ～ 5.2

  Běžná cena (bez DPH):

  150.84 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  HELI TURN, SLANR/L (for Outer Diameter Machining)

  [Features] Can be used for external machining.[Features] Supports high cut and high feed machining, resulting in high metal removal rates and high productivity.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter	Screw-on	Right-hand / Left-hand	-	20 ～ 32	20 ～ 32

  Běžná cena (bez DPH):

  147.22 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat
• 

  ISCAR

  PENTACUT , Toolholder for Parting, Grooving (Shallow Groove), Multifunctional Tool

  For cutting off, grooving, and multi-functional machining (for shallow grooves)

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	Outer Diameter	Screw-on	Right-hand / Left-hand	-	10 ～ 25	10 ～ 25

  Běžná cena (bez DPH):

  133.07 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Holder for Outer Diameter Machining (R Clamp) DWLNR/L

  A key clamp system, making installation and removal rapid and simple.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	20 ～ 32	20 ～ 32

  Běžná cena (bez DPH):

  116.03 €～

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  ISCAR

  Holder for Outer Diameter Machining (Screw Clamp) SRGCR/L, SRDCN

  [Features] Can be used for external machining.[Features] Supports both left and right cutting directions.

  Více informací

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	Outer Diameter	Screw-on	Right-hand / Left-hand / No-hand	-	16 ～ 32	16 ～ 32

  Běžná cena (bez DPH):

  123.05 €～

  Běžné datum odeslání:

  8 pracovních dnů

  Konfigurovat