Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Application
  • Screw Type
  • Pitch(mm)
  • Minimum Machining Diameter(mm)
  • Cutting Direction
  • Shank size
  • Výrobce

Thread Cutting Holders (Pitch: 0.5-3.0)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
    • Cutting Head for CORO-TURN SL CORO THREAD 266

        SANDVIK

        Cutting Head for CORO-TURN SL CORO THREAD 266

        Unique shape exhibits high performance
        Více informací
        ApplicationScrew TypePitch(mm)Minimum Machining Diameter(mm)Cutting DirectionShank sizeWith/Without Cutting Oil HoleWith/without flat cutting blade
        Internal thread60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT)0.5-3.032 ~ 50Right-hand / Left-handØ25 / Ø32 / Ø40N/AN/A
        Cena (bez DPH) od:
        439.85 €
        Běžné datum odeslání:
        8 pracovních dnů
        Konfigurovat
      • CoroThread 266 SL Cutting Head For Outer-Diameter Threading, Screw Clamp, SL-FG

          SANDVIK

          CoroThread 266 SL Cutting Head For Outer-Diameter Threading, Screw Clamp, SL-FG

          [Features]An outer-diameter threading type cutting head with extremely high rigidity. The iLock interface helps prevent the insert from moving around during threading operations, guaranteeing stability and accuracy while also ensuring a clean finish with excellent repeatability. For outer-diameter threading.
          Více informací
          ApplicationScrew TypePitch(mm)Minimum Machining Diameter(mm)Cutting DirectionShank sizeWith/Without Cutting Oil HoleWith/without flat cutting blade
          Outer Diameter Screw60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT)0.5-3.025 ~ 40Right-hand / Left-handØ25 / Ø32 / Ø40AvailableN/A
          Cena (bez DPH) od:
          441.86 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat

        Nenašli jste produkt, který hledáte?