Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Thread Cutting Holders (Shank size: 10 Sq.)
The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
1 položek
* Informace o dnech dodání, přepravních nákladech a cenách
SANDVIK
CoroThread 266, Shank Tool Bit, QS Series Short, QS-266RFA-16
Application Screw Type Pitch(mm) Minimum Machining Diameter(mm) Cutting Direction Shank size With/Without Cutting Oil Hole With/without flat cutting blade Outer Diameter Screw 60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes / American Pipe Taper (NPT) - - Right-hand 10 Sq. N/A N/A KonfigurovatCena (bez DPH) od:254.41 €Běžné datum odeslání:6 pracovních dnů
