Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (work material: Quenched and tempered steel Stránka 2)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Super Long Drill
      • Volume Discount

      ATOM

      Super Long Drill

      ADS standard straight shank drill extra-long type.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 1315 ~ 120Quenched and tempered steel[○]Carbide75 ~ 250Straight ShankN/ANon-CoatedN/A
      Cena (bez DPH) od:
      29.54 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Hi-Spec Micro Drill
      • SLEVA
      • Volume Discount

      ATOM

      Hi-Spec Micro Drill

      The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.035 ~ 1.9950.4 ~ 22Quenched and tempered steel[○]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
      Cena (bez DPH) od:
      40.91 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Long Drill
      • Volume Discount

      ATOM

      Long Drill

      ADS standard straight shank drill long type.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 1310 ~ 90Quenched and tempered steel[○]Carbide60 ~ 200Straight ShankN/ANon-CoatedN/A
      Cena (bez DPH) od:
      26.55 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Standard Solid Drill
      • SLEVA
      • Volume Discount

      ATOM

      Standard Solid Drill

      A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 134 ~ 50Quenched and tempered steel[○]Carbide30 ~ 100Straight ShankN/ANon-CoatedN/A
      Cena (bez DPH) od:
      16.75 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Micro Drill, 8 X D, Type-N 6408

        GUHRING

        Micro Drill, 8 X D, Type-N 6408

        Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machining
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1.4 ~ 315 ~ 33Quenched and tempered steel[○]Carbide52 ~ 66-AvailableOtherAvailable
        Cena (bez DPH) od:
        152.28 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Micro Drill, Type-N 3899
        • Volume Discount

        GUHRING

        Micro Drill, Type-N 3899

        Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.1 ~ 31.2 ~ 12Quenched and tempered steel[○]Carbide38-AvailableTiAlNN/A
        Cena (bez DPH) od:
        54.95 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Micro Drill, Type-N 660

          GUHRING

          Micro Drill, Type-N 660

          Coated drill for small diameter hole drilling.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.16 ~ 1.91.1 ~ 11.8Quenched and tempered steel[○]Cobalt HSS25 ~ 30-AvailableTiNN/A
          Cena (bez DPH) od:
          23.03 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Carbide Flat Drill ADFLS-2D
          • Volume Discount

          OSG

          Carbide Flat Drill ADFLS-2D

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3 ~ 2015 ~ 88Quenched and tempered steel[○]Carbide100 ~ 250End Mill Shank / Straight ShankAvailableOtherN/A
          Cena (bez DPH) od:
          89.70 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • MC Drill MCD
          • Volume Discount

          NACHI(FUJIKOSHI)

          MC Drill MCD

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          24 ~ 25107Quenched and tempered steel[○]Cobalt HSS177 ~ 180Straight ShankN/ANon-CoatedN/A
          Cena (bez DPH) od:
          174.51 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • G Long Tapered Shank Oil Hole Drill GLTDOH

            NACHI(FUJIKOSHI)

            G Long Tapered Shank Oil Hole Drill GLTDOH

            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            5 ~ 50300 ~ 600Quenched and tempered steel[○]Cobalt HSS450 ~ 800Taper shankAvailableTiNAvailable
            Cena (bez DPH) od:
            1,041.51 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

              OSG

              Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

              [Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.03 ~ 12.0315 ~ 60Quenched and tempered steel[○]Carbide65 ~ 120End Mill ShankAvailableOtherAvailable
              Cena (bez DPH) od:
              98.10 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • VariDrill Solid Carbide Drill 8xD VDS403A

                WIDIA

                VariDrill Solid Carbide Drill 8xD VDS403A

                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                556Quenched and tempered steel[○]Carbide94End Mill ShankAvailableTiAlNAvailable
                Cena (bez DPH) od:
                183.16 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • TS Coated Carbide Composite Spiral Drill, Stub Model
                • Volume Discount

                MISUMI

                TS Coated Carbide Composite Spiral Drill, Stub Model

                [Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1220 ~ 55Quenched and tempered steel[○]Carbide50 ~ 115End Mill ShankAvailable-N/A
                Cena (bez DPH) od:
                100.34 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

                [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1320 ~ 71Quenched and tempered steel[○]Carbide62 ~ 124End Mill ShankAvailableTiAlNAvailable / N/A
                Cena (bez DPH) od:
                55.49 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

                3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1312 ~ 77Quenched and tempered steel[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                60.30 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Double Margin Drill, Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Double Margin Drill, Regular

                [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                1 ~ 1112 ~ 71Quenched and tempered steel[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                81.68 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

                [Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1320 ~ 60Quenched and tempered steel[○]Carbide66 ~ 107End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                43.35 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

                By applying three rake + R thinning, it demonstrates a high level of afferent.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1328 ~ 77Quenched and tempered steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                51.31 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

                [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1316 ~ 77Quenched and tempered steel[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                40.76 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

                [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 820 ~ 41Quenched and tempered steel[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                40.39 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

                [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                4.2 ~ 724 ~ 53Quenched and tempered steel[○]Carbide66 ~ 91End Mill ShankAvailableTiAlNAvailable
                Cena (bez DPH) od:
                107.05 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Drill, Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Drill, Regular

                [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                0.3 ~ 133 ~ 77Quenched and tempered steel[○]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                22.57 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Drill, Straight Shank / Regular
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Drill, Straight Shank / Regular

                [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                1 ~ 812 ~ 75Quenched and tempered steel[○]Carbide34 ~ 117Straight ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                22.24 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Carbide Long Drill, Straight Shank
                • Volume Discount

                MISUMI

                TiAlN Coated Carbide Long Drill, Straight Shank

                Carbide long drill that achieves the high efficiency deep-hole drilling
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1060 ~ 140Quenched and tempered steel[○]Carbide100 ~ 200Straight ShankAvailableTiAlNAvailable / N/A
                Cena (bez DPH) od:
                100.26 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
                • Volume Discount

                MISUMI

                TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

                [Features] -Weak helix and large core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed-Ideal for machining high hardness steel from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1320 ~ 60Quenched and tempered steel[○]Carbide62 ~ 107End Mill ShankAvailable-N/A
                Cena (bez DPH) od:
                63.39 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
                • Volume Discount

                MISUMI

                TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

                [Features] -Weak spiral angle and high core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1316 ~ 78Quenched and tempered steel[○]Carbide46 ~ 137Straight ShankAvailable-N/A
                Cena (bez DPH) od:
                53.49 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
                • Volume Discount

                MISUMI

                TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

                A small radius type of the high-hardness steel series
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                0.8 ~ 36 ~ 27Quenched and tempered steel[◎]Carbide47 ~ 67End Mill ShankAvailable-N/A
                Cena (bez DPH) od:
                42.03 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
                • Volume Discount

                MISUMI

                TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

                Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1324 ~ 101Quenched and tempered steel[◎]Powder high-speed steel56 ~ 161End Mill ShankAvailableTiAlNAvailable / N/A
                Cena (bez DPH) od:
                15.71 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiN Coated High-Speed Steel Drill, End Mill Shank / Stub
                • Volume Discount

                MISUMI

                TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1312 ~ 51Quenched and tempered steel[○]Cobalt HSS44 ~ 111End Mill ShankAvailableTiNN/A
                Cena (bez DPH) od:
                10.26 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiN Coated High-Speed Steel Drill, End Mill Shank / Regular
                • Volume Discount

                MISUMI

                TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1324 ~ 101Quenched and tempered steel[○]Cobalt HSS56 ~ 161End Mill ShankAvailableTiNN/A
                Cena (bez DPH) od:
                9.96 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
                • Volume Discount

                MISUMI

                TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1 až 10 kusů】

                [Features] -Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip evacuation-X-shaped thinning provides a good bevel and reduces pressure load significantly.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1324 ~ 101Quenched and tempered steel[○]Cobalt HSS49 ~ 151Straight ShankAvailableTiNN/A
                Cena (bez DPH) od:
                8.17 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long
                • Volume Discount

                MISUMI

                TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

                [Features] -The best cutting performance for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip flow.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                2 ~ 1356 ~ 134Quenched and tempered steel[○]Cobalt HSS85 ~ 205Straight ShankAvailableTiNN/A
                Cena (bez DPH) od:
                17.53 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • TiN Coated High-Speed Steel Drill, Straight Shank / Regular

                  MISUMI

                  TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5 až 10 kusů】

                  Carefully selected frequently used 48 sizes are assorted at low prices
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1 ~ 1312 ~ 101Quenched and tempered steel[○]High-speed steel34 ~ 151Straight ShankAvailableTiNN/A
                  Cena (bez DPH) od:
                  23.47 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill, Tapered Shank / Regular
                  • Volume Discount

                  MISUMI

                  TiN Coated High-Speed Steel Drill, Tapered Shank / Regular

                  A powerful tapered shank drill with TiN coating that has further improved the durability
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  10.5 ~ 3087 ~ 175Quenched and tempered steel[○]High-speed steel168 ~ 296Taper shankAvailableTiNN/A
                  Cena (bez DPH) od:
                  97.06 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
                  • Volume Discount

                  MISUMI

                  TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub

                  · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1 ~ 9.26 ~ 40Quenched and tempered steel[◎]Powder high-speed steel38 ~ 90End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  7.37 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
                  • Volume Discount

                  MISUMI

                  TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular

                  · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  --Quenched and tempered steel[◎]Powder high-speed steel-End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  8.31 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • Carbide Step Drill Bit, With Custom Dimensions

                    MISUMI

                    Carbide Step Drill Bit, With Custom Dimensions

                    [Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    --Quenched and tempered steel[○]Carbide-End Mill ShankN/A-N/A
                    Běžné datum odeslání:
                    9 pracovních dnů
                    Konfigurovat
                  • AG Starting Drill AGSTD

                      NACHI(FUJIKOSHI)

                      AG Starting Drill AGSTD

                      Starting drill for positioning use. Can perform centering, chamfering, and even V grooving.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3 ~ 209 ~ 40Quenched and tempered steel[◎]Cobalt HSS-----
                      Cena (bez DPH) od:
                      20.51 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • AG-ESS drill AGESS
                      • Volume Discount

                      NACHI(FUJIKOSHI)

                      AG-ESS drill AGESS

                      Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      1.2 ~ 17.78 ~ 87Quenched and tempered steel[◎]High-speed steel40 ~ 153End Mill ShankAvailableOtherN/A
                      Cena (bez DPH) od:
                      14.33 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • G Short Tapered Shank Drill GTS

                        NACHI(FUJIKOSHI)

                        G Short Tapered Shank Drill GTS

                        Performs high efficiency grooving of workpiece materials such as steel, stainless steel and aluminum. High-accuracy positioning can be obtained.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        7 ~ 31.545 ~ 114Quenched and tempered steel[◎]Cobalt HSS126 ~ 235-AvailableTiN-
                        Cena (bez DPH) od:
                        101.91 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Aqua Drill 3-Flute AQD3F

                          NACHI(FUJIKOSHI)

                          Aqua Drill 3-Flute AQD3F

                          Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          4.21 ~ 12.5522 ~ 51Quenched and tempered steel[◎]Carbide66 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
                          Cena (bez DPH) od:
                          111.82 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Aqua Drill EX Oil Hole 5D AQDEXOH5D

                            NACHI(FUJIKOSHI)

                            Aqua Drill EX Oil Hole 5D AQDEXOH5D

                            Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2.5 ~ 8.720 ~ 72Quenched and tempered steel[◎]Carbide68 ~ 127End Mill Shank / Straight ShankAvailableOtherAvailable
                            Cena (bez DPH) od:
                            116.24 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Aqua Drill Regular AQDR
                            • Volume Discount

                            NACHI(FUJIKOSHI)

                            Aqua Drill Regular AQDR

                            Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            3.7 ~ 1024 ~ 60Quenched and tempered steel[◎]Carbide56 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
                            Cena (bez DPH) od:
                            84.41 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • AG Starting Drill Long Shank AGSTDLS
                            • SLEVA
                            • Volume Discount

                            NACHI(FUJIKOSHI)

                            AG Starting Drill Long Shank AGSTDLS

                            A long shank type starting drill designed to avoid interfering with deep positions.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            3 ~ 129 ~ 30Quenched and tempered steel[◎]Cobalt HSS-----
                            Cena (bez DPH) od:
                            33.19 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • AG-ES drill AGES
                            • Volume Discount

                            NACHI(FUJIKOSHI)

                            AG-ES drill AGES

                            Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            4.1 ~ 2043 ~ 140Quenched and tempered steel[◎]High-speed steel89 ~ 210End Mill Shank / Straight ShankAvailableOtherN/A
                            Cena (bez DPH) od:
                            23.33 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat