Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (work material: Copper Stránka 2)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Micro Drill, Type-N 660

        GUHRING

        Micro Drill, Type-N 660

        Coated drill for small diameter hole drilling.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.16 ~ 1.91.1 ~ 11.8Copper[○]Cobalt HSS25 ~ 30-AvailableTiNN/A
        Cena (bez DPH) od:
        23.03 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Top Solid Tapered Shank Twist Drill DTD

          DIJET

          Top Solid Tapered Shank Twist Drill DTD

          [Features]· It is a tool with excellent abrasion resistance.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          6 ~ 3068 ~ 188Copper[○]Carbide148 ~ 305Taper shankN/ANon-CoatedN/A
          Cena (bez DPH) od:
          202.21 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM
          • Volume Discount

          EIKOSHA

          Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3.4 ~ 2013 ~ 45Copper[○]High-speed steel65 ~ 145Straight ShankAvailableOtherN/A
          Cena (bez DPH) od:
          74.70 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Phoenix Head Replaceable Drill PXD Head PXD-NC
          • Volume Discount

          OSG

          Phoenix Head Replaceable Drill PXD Head PXD-NC

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          14 ~ 25.4-Copper[○]---AvailableOther-
          Cena (bez DPH) od:
          76.30 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Carbide Flat Drill ADFLS-2D
          • Volume Discount

          OSG

          Carbide Flat Drill ADFLS-2D

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3 ~ 2015 ~ 88Copper[○]Carbide100 ~ 250End Mill Shank / Straight ShankAvailableOtherN/A
          Cena (bez DPH) od:
          89.70 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • MC Drill MCD
          • Volume Discount

          NACHI(FUJIKOSHI)

          MC Drill MCD

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          24 ~ 25107Copper[○]Cobalt HSS177 ~ 180Straight ShankN/ANon-CoatedN/A
          Cena (bez DPH) od:
          174.51 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • G Long Tapered Shank Oil Hole Drill GLTDOH

            NACHI(FUJIKOSHI)

            G Long Tapered Shank Oil Hole Drill GLTDOH

            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            5 ~ 50300 ~ 600Copper[○]Cobalt HSS450 ~ 800Taper shankAvailableTiNAvailable
            Cena (bez DPH) od:
            1,041.51 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
            • Volume Discount

            OSG

            Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D

            [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil hole
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2.8 ~ 2017 ~ 100Copper[◎]Carbide66 ~ 165End Mill Shank / Straight ShankAvailableOtherAvailable
            Cena (bez DPH) od:
            65.10 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • VariDrill Solid Carbide Drill 8xD VDS403A

              WIDIA

              VariDrill Solid Carbide Drill 8xD VDS403A

              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              556Copper[○]Carbide94End Mill ShankAvailableTiAlNAvailable
              Cena (bez DPH) od:
              183.16 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • SANDVIK CoroDrill 880 Indexable Insert Drill

                SANDVIK

                SANDVIK CoroDrill 880 Indexable Insert Drill

                [Specifications]・Drill type: Indexable insert drill・eClass-5.1: 21010103[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                12 ~ 84212.77 ~ 339.15Copper[○]-295 ~ 404----
                Cena (bez DPH) od:
                627.00 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat
              • SANDVIK CoroDrill 460 Solid Carbide Step and Chamfer Drill

                  SANDVIK

                  SANDVIK CoroDrill 460 Solid Carbide Step and Chamfer Drill

                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  5 ~ 14-Copper[○]------
                  Cena (bez DPH) od:
                  108.83 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

                  [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  3 ~ 820 ~ 41Copper[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  40.39 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

                  [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  4.2 ~ 724 ~ 53Copper[○]Carbide66 ~ 91End Mill ShankAvailableTiAlNAvailable
                  Cena (bez DPH) od:
                  107.05 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Carbide Drill, Regular
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide Drill, Regular

                  [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.3 ~ 133 ~ 77Copper[◎]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  22.57 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Carbide Drill, Straight Shank / Regular
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide Drill, Straight Shank / Regular

                  [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1 ~ 812 ~ 75Copper[○]Carbide34 ~ 117Straight ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  22.24 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Carbide Long Drill, Straight Shank
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Carbide Long Drill, Straight Shank

                  Carbide long drill that achieves the high efficiency deep-hole drilling
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  3 ~ 1060 ~ 140Copper[○]Carbide100 ~ 200Straight ShankAvailableTiAlNAvailable / N/A
                  Cena (bez DPH) od:
                  100.26 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
                  • Volume Discount

                  MISUMI

                  TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

                  A small radius type of the high-hardness steel series
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.8 ~ 36 ~ 27Copper[○]Carbide47 ~ 67End Mill ShankAvailable-N/A
                  Cena (bez DPH) od:
                  42.03 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • DLC Coated Carbide Drill for Aluminium Machining, Regular
                  • Volume Discount

                  MISUMI

                  DLC Coated Carbide Drill for Aluminium Machining, Regular

                  [Features] -The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper-The high helix shape provides excellent chip evacuation and sharpness-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  5.52 ~ 11.3841 ~ 71Copper[○]Carbide85 ~ 128End Mill ShankAvailableDLCN/A
                  Cena (bez DPH) od:
                  83.76 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
                  • Volume Discount

                  MISUMI

                  TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

                  Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 1324 ~ 101Copper[○]Powder high-speed steel56 ~ 161End Mill ShankAvailableTiAlNAvailable / N/A
                  Cena (bez DPH) od:
                  15.71 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill, End Mill Shank / Stub
                  • Volume Discount

                  MISUMI

                  TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 1312 ~ 51Copper[○]Cobalt HSS44 ~ 111End Mill ShankAvailableTiNN/A
                  Cena (bez DPH) od:
                  10.26 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill, End Mill Shank / Regular
                  • Volume Discount

                  MISUMI

                  TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 1324 ~ 101Copper[○]Cobalt HSS56 ~ 161End Mill ShankAvailableTiNN/A
                  Cena (bez DPH) od:
                  9.96 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
                  • Volume Discount

                  MISUMI

                  TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1 až 10 kusů】

                  [Features] -Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip evacuation-X-shaped thinning provides a good bevel and reduces pressure load significantly.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 1324 ~ 101Copper[○]Cobalt HSS49 ~ 151Straight ShankAvailableTiNN/A
                  Cena (bez DPH) od:
                  8.17 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long
                  • Volume Discount

                  MISUMI

                  TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

                  [Features] -The best cutting performance for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip flow.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2 ~ 1356 ~ 134Copper[○]Cobalt HSS85 ~ 205Straight ShankAvailableTiNN/A
                  Cena (bez DPH) od:
                  17.53 €
                  Běžné datum odeslání:
                  5 pracovních dnů
                  Konfigurovat
                • TiN Coated High-Speed Steel Drill, Straight Shank / Regular

                    MISUMI

                    TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5 až 10 kusů】

                    Carefully selected frequently used 48 sizes are assorted at low prices
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1 ~ 1312 ~ 101Copper[○]High-speed steel34 ~ 151Straight ShankAvailableTiNN/A
                    Cena (bez DPH) od:
                    23.47 €
                    Běžné datum odeslání:
                    5 pracovních dnů
                    Konfigurovat
                  • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
                    • Volume Discount

                    MISUMI

                    TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub

                    · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1 ~ 9.26 ~ 40Copper[○]Powder high-speed steel38 ~ 90End Mill ShankAvailableTiAlNN/A
                    Cena (bez DPH) od:
                    7.37 €
                    Běžné datum odeslání:
                    5 pracovních dnů
                    Konfigurovat
                  • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
                    • Volume Discount

                    MISUMI

                    TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular

                    · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    --Copper[○]Powder high-speed steel-End Mill ShankAvailableTiAlNN/A
                    Cena (bez DPH) od:
                    8.31 €
                    Běžné datum odeslání:
                    5 pracovních dnů
                    Konfigurovat
                  • Carbide Step Drill Bit, With Custom Dimensions

                      MISUMI

                      Carbide Step Drill Bit, With Custom Dimensions

                      [Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --Copper[○]Carbide-End Mill ShankN/A-N/A
                      Běžné datum odeslání:
                      9 pracovních dnů
                      Konfigurovat
                    • AG Starting Drill AGSTD

                        NACHI(FUJIKOSHI)

                        AG Starting Drill AGSTD

                        Starting drill for positioning use. Can perform centering, chamfering, and even V grooving.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        3 ~ 209 ~ 40Copper[○]Cobalt HSS-----
                        Cena (bez DPH) od:
                        20.51 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • AG-ESS drill AGESS
                        • Volume Discount

                        NACHI(FUJIKOSHI)

                        AG-ESS drill AGESS

                        Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        1.2 ~ 17.78 ~ 87Copper[○]High-speed steel40 ~ 153End Mill ShankAvailableOtherN/A
                        Cena (bez DPH) od:
                        14.33 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • G Short Tapered Shank Drill GTS

                          NACHI(FUJIKOSHI)

                          G Short Tapered Shank Drill GTS

                          Performs high efficiency grooving of workpiece materials such as steel, stainless steel and aluminum. High-accuracy positioning can be obtained.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          7 ~ 31.545 ~ 114Copper[○]Cobalt HSS126 ~ 235-AvailableTiN-
                          Cena (bez DPH) od:
                          101.91 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • AG Starting Drill Long Shank AGSTDLS
                          • SLEVA
                          • Volume Discount

                          NACHI(FUJIKOSHI)

                          AG Starting Drill Long Shank AGSTDLS

                          A long shank type starting drill designed to avoid interfering with deep positions.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          3 ~ 129 ~ 30Copper[○]Cobalt HSS-----
                          Cena (bez DPH) od:
                          33.19 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • AG-ES drill AGES
                          • Volume Discount

                          NACHI(FUJIKOSHI)

                          AG-ES drill AGES

                          Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          4.1 ~ 2043 ~ 140Copper[○]High-speed steel89 ~ 210End Mill Shank / Straight ShankAvailableOtherN/A
                          Cena (bez DPH) od:
                          23.33 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • G Short Drill GSS
                          • SLEVA
                          • Volume Discount
                          • Stock

                          NACHI(FUJIKOSHI)

                          G Short Drill GSS

                          Performs high efficiency grooving of workpiece materials such as steel, stainless steel and aluminum. High-accuracy hole positioning can be obtained.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          1.6 ~ 8.713 ~ 54Copper[○]Cobalt HSS39 ~ 105Straight ShankAvailableTiNN/A
                          Cena (bez DPH) od:
                          10.02 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • G Standard Drill GSD
                          • Volume Discount

                          NACHI(FUJIKOSHI)

                          G Standard Drill GSD

                          It si a general-purpose coated drill, for machining of workpiece materials from carbon steel and stainless steel to aluminum.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          9.481Copper[○]High-speed steel125Straight ShankAvailableTiNN/A
                          Cena (bez DPH) od:
                          41.19 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • G Standard Tapered Shank Drill GTD

                            NACHI(FUJIKOSHI)

                            G Standard Tapered Shank Drill GTD

                            It si a general-purpose coated drill, for machining of workpiece materials from carbon steel and stainless steel to aluminum.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            8 ~ 31.573 ~ 172Copper[○]High-speed steel154 ~ 293-AvailableTiN-
                            Cena (bez DPH) od:
                            98.12 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • SG-ES Drill SGES
                            • Volume Discount

                            NACHI(FUJIKOSHI)

                            SG-ES Drill SGES

                            Performs high-speed, high-efficiency machining of steel, mold steel and aluminum. It can not be used for austenitic stainless steel.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 3224 ~ 185Copper[○]High-speed steel56 ~ 255End Mill Shank / Straight ShankAvailableTiCNN/A
                            Cena (bez DPH) od:
                            14.61 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • SG-FAX Oil Hole Drill SGOH

                              NACHI(FUJIKOSHI)

                              SG-FAX Oil Hole Drill SGOH

                              Oil-hole drill that achieves high-speed, high-efficiency machining of workpiece materials such as steel, stainless steel as well as aluminum.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              10 ~ 3075 ~ 174Copper[○]High-speed steel144 ~ 265End Mill ShankAvailableTiCNAvailable
                              Cena (bez DPH) od:
                              241.51 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Cobalt Tapered Shank Drill COTD
                              • Volume Discount

                              NACHI(FUJIKOSHI)

                              Cobalt Tapered Shank Drill COTD

                              It si a general-purpose cobalt drill, for machining of workpiece materials from carbon steel and stainless steel to aluminum.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              7.1 ~ 4078 ~ 220Copper[○]Cobalt HSS158 ~ 365Taper shankN/A--
                              Cena (bez DPH) od:
                              63.38 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • G Oil Hole Drill GOH

                                NACHI(FUJIKOSHI)

                                G Oil Hole Drill GOH

                                General-purpose coating oil hole drill. Side-lock shank has been adopted.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                8 ~ 4033 ~ 152Copper[○]Cobalt HSS83 ~ 250End Mill Shank / Straight ShankAvailableTiNAvailable
                                Cena (bez DPH) od:
                                270.06 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • G Long Drill GLSD
                                • Volume Discount

                                NACHI(FUJIKOSHI)

                                G Long Drill GLSD

                                Coating drill for deep hole machining. Removes debris well and is well suited for deep holes and opening holes in deep locations.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                10.5120Copper[○]Cobalt HSS250Straight ShankAvailableTiNN/A
                                Cena (bez DPH) od:
                                163.81 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • AG-SUS Drill, Short AGSUSS
                                • SLEVA
                                • Volume Discount

                                NACHI(FUJIKOSHI)

                                AG-SUS Drill, Short AGSUSS

                                Drills best suited for stainless steel. AG coat with excellent heat resistance offers stable drilling.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                1.01 ~ 206 ~ 94Copper[○]High-speed steel40 ~ 168End Mill Shank / Straight ShankAvailableTiAlNN/A
                                Cena (bez DPH) od:
                                8.14 €
                                Speciální cena
                                Běžné datum odeslání:
                                Skladová položka: 1 pracovní den
                                Některé položky lze dodat ve stejný den
                                Konfigurovat
                              • DLC Regular Drill DLCDR

                                  NACHI(FUJIKOSHI)

                                  DLC Regular Drill DLCDR

                                  High speed wet processing and dry processing of aluminum alloy is possible.
                                  Více informací
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  4 ~ 9.527 ~ 58Copper[○]Carbide59 ~ 108End Mill Shank / Straight ShankAvailableDLCN/A
                                  Cena (bez DPH) od:
                                  91.27 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • Diamond-Coated Super Hard D-GDN

                                    OSG

                                    Diamond-Coated Super Hard D-GDN

                                    Excellent power of course against aluminum alloys, but especially against high silicon aluminum alloys for a extremely short-life carbide drill
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    2 ~ 1218 ~ 76Copper[○]Carbide54 ~ 126End Mill Shank / Straight ShankAvailableDia CoatN/A
                                    Cena (bez DPH) od:
                                    94.07 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Extra Long Type Carbide with Oil Hole for Copper / Aluminium CAO-GDXL

                                      OSG

                                      Extra Long Type Carbide with Oil Hole for Copper / Aluminium CAO-GDXL

                                      Non-step machining of ultra-deep 15D - 30D holes. Achieves a Machining Efficiency and Tool Life Several Times that of Gun Drills and HSS Drills
                                      Více informací
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      3 ~ 1055 ~ 265Copper[○]Carbide105 ~ 315End Mill Shank / Straight ShankN/ANon-CoatedAvailable
                                      Cena (bez DPH) od:
                                      292.50 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • MT Shank for Stainless Steel / Soft Steels MT-SUS-GDR
                                      • Volume Discount

                                      OSG

                                      MT Shank for Stainless Steel / Soft Steels MT-SUS-GDR

                                      Morse taper shank, suitable for lathes, drilling machines, multi-axis special machines, etc.
                                      Více informací
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      6 ~ 5057 ~ 200Copper[◎]High Vanadium HSS137 ~ 345End Mill ShankAvailableTiNN/A
                                      Cena (bez DPH) od:
                                      45.86 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat