Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (With/without Oil Hole: N/A Stránka 2)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        MISUMI

        Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        [Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-Straight ShankN/A-N/A
        Běžné datum odeslání:
        12 pracovních dnů
        Konfigurovat
      • DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub
        • Volume Discount

        MISUMI

        DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub

        [Features]-Excellent chip evacuation and sharpness due to high spiral shape-Designed for frequent pre-drilling of M4 to M12 metric coarse holes-2 types of step angles are available for chamfering and cutting-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        6.8 ~ 10.348 ~ 72Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide104 ~ 136Straight ShankAvailableDLCN/A
        Cena (bez DPH) od:
        97.95 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • TiN Coated High-Speed Steel Drill, Straight Shank / Regular
        • Volume Discount

        MISUMI

        TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1 až 10 kusů】

        With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1 ~ 12.512 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS34 ~ 151Straight ShankAvailableTiNN/A
        Cena (bez DPH) od:
        13.33 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • High-Speed Steel Drill, Tapered Shank / Regular Model
        • Volume Discount

        MISUMI

        High-Speed Steel Drill, Tapered Shank / Regular Model

        General purpose tapered shank drills that facilitate machining are available in rich lineups of 71 sizes
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        8.5 ~ 5075 ~ 220General Steel[○]High-speed steel156 ~ 369Taper shankN/A-N/A
        Cena (bez DPH) od:
        31.82 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Carbide Burnishing Drill Bit, Long Shank Type

          MISUMI

          Carbide Burnishing Drill Bit, Long Shank Type

          [Features]・Ideal for step drilling aluminum.・Long shank types are now available.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          --Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • Straight Shank Set SD

            NACHI(FUJIKOSHI)

            Straight Shank Set SD

            General purpose drill that is most versatile and widely used.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2.12 ~ 11.929 ~ 109General Steel[○] / Cast Iron[○] / Aluminum[○]High-speed steel55 ~ 146Straight ShankN/ANon-CoatedN/A
            Cena (bez DPH) od:
            5.37 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Aqua Drill FC AQDFC

              NACHI(FUJIKOSHI)

              Aqua Drill FC AQDFC

              Ideal for long-life processing of FC, FCD and low carbon steel.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2.1 ~ 11.915 ~ 73General Steel[◎] / Cast Iron[◎]Carbide47 ~ 130End Mill ShankAvailableOtherN/A
              Cena (bez DPH) od:
              107.64 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Straight Shank Long Drill LSD

                NACHI(FUJIKOSHI)

                Straight Shank Long Drill LSD

                A general purpose long drill bit used over the widest range of applications.[Features]· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                7.1 ~ 13100 ~ 200General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel200 ~ 400Straight ShankN/ANon-CoatedN/A
                Cena (bez DPH) od:
                51.84 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • DLC Micro Drills DLCMD

                  NACHI(FUJIKOSHI)

                  DLC Micro Drills DLCMD

                  High speed wet processing and dry processing of aluminum alloy is possible. Aluminum drill for small diameter hole.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1.315Aluminum[◎] / Copper[○]Carbide47End Mill ShankAvailableDLCN/A
                  Cena (bez DPH) od:
                  57.05 €
                  Běžné datum odeslání:
                  10 pracovních dnů
                  Konfigurovat
                • Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN
                  • Volume Discount

                  OSG

                  Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN

                  Achieves High Cost Performance in High Speed Hole Drilling of Cast Aluminum, Die Cast Aluminum, Malleable Aluminum etc. Used Extensively in Automobile / Airplane Manufacturing
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  3 ~ 1325 ~ 76Cast Iron[◎] / Aluminum[◎] / Copper[○]Carbide59 ~ 128End Mill Shank / Straight ShankN/ANon-CoatedN/A
                  Cena (bez DPH) od:
                  18.82 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • High Speed Extra Long 20 D Type TDXL20D
                  • Volume Discount

                  OSG

                  High Speed Extra Long 20 D Type TDXL20D

                  Long drill that has achieved ultra-deep drilling up to 20D with an HSS drill.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1.6 ~ 1238 ~ 276General Steel[◎] / Cast Iron[◎] / Aluminum[◎]Cobalt HSS85 ~ 350Straight ShankAvailableOtherN/A
                  Cena (bez DPH) od:
                  33.50 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Long Shank for General Machining Stub Type EX-LS-GDS

                    OSG

                    Long Shank for General Machining Stub Type EX-LS-GDS

                    Useful for adjacent sections such as machines requiring horizontal lead, walls and jigs.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3.3 ~ 8.518 ~ 37General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]Cobalt HSS100 ~ 200Straight ShankAvailableTiNN/A
                    Cena (bez DPH) od:
                    18.61 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Long Type for General Machining EX-GDXL
                    • SLEVA
                    • Volume Discount

                    OSG

                    Long Type for General Machining EX-GDXL

                    Due to high rigidity parabolic groove, performs deep hole drilling of up to 7-10 times the diameter
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    2 ~ 1340 ~ 200General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○]Cobalt HSS100 ~ 300Straight ShankAvailableTiNN/A
                    Cena (bez DPH) od:
                    27.90 €
                    Speciální cena
                    Běžné datum odeslání:
                    Skladová položka: 1 pracovní den
                    Některé položky lze dodat ve stejný den
                    Konfigurovat
                  • NSPD Micro Point Drill (Pilot Hole Machining)
                    • Volume Discount

                    NS TOOL

                    NSPD Micro Point Drill (Pilot Hole Machining)

                    The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.01 ~ 0.10.015 ~ 0.2Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
                    Cena (bez DPH) od:
                    48.72 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • DIXI1130 Cemented Carbide Drill (Stub Size)

                      DIXI

                      DIXI1130 Cemented Carbide Drill (Stub Size)

                      A Swiss-made stub-sized drill. It provides excellent polish on grooves and surfaces, removes cutting chips well and provides excellent hole finish.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.4 ~ 36 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]Carbide30 ~ 46Straight ShankN/A-N/A
                      Cena (bez DPH) od:
                      22.58 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Carbide Edged Tip Taper Shank Drill

                        FUKUDA

                        Carbide Edged Tip Taper Shank Drill

                        Economical soldering type. The drill helps maintain high economic efficiency as it is appropriate for cast iron and non-ferrous metals, and taking into account the characteristics of carbide alloy and selection of regrinding frequencies.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        6 ~ 6030 ~ 222Cast Iron[◎] / Aluminum[○]-110 ~ 412Taper shankN/A-N/A
                        Cena (bez DPH) od:
                        140.19 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • GP Drill Short 5D ALT Coating
                        • Volume Discount

                        IWATA TOOL

                        GP Drill Short 5D ALT Coating

                        [Features]· Taking on ultra-high speed machining.· 0.25 seconds per hole, lifetime of 20,000 or more holes.· Allows non-step boring up to 3D hole depth (up to 7D in some situations).· High precision and super long life.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.3 ~ 31.9 ~ 18.5General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]Carbide40 ~ 60End Mill ShankAvailableTiAlNN/A
                        Cena (bez DPH) od:
                        40.04 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Toglon Hard Drill Regular ALT Coating
                        • SLEVA
                        • Volume Discount

                        IWATA TOOL

                        Toglon Hard Drill Regular ALT Coating

                        · 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        1 ~ 66 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide50 ~ 120End Mill ShankAvailableTiAlNN/A
                        Cena (bez DPH) od:
                        89.60 €
                        Speciální cena
                        Běžné datum odeslání:
                        Skladová položka: 1 pracovní den
                        Některé položky lze dodat ve stejný den
                        Konfigurovat
                      • Toglon Hard Long Drill 20D ALT Coating

                          IWATA TOOL

                          Toglon Hard Long Drill 20D ALT Coating

                          [Features]· Realizes through-holes of 20D or more in quenched steel.· H7 or greater accuracy is possible due to the extremely high circularity and cylindricity and excellent surface roughness.· Can also machine mold ejector pin holes, etc., in one go without a pilot hole.· Reduced processes can help to shorten lead time.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          1.1 ~ 66.6 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide60 ~ 200End Mill ShankAvailableTiAlNN/A
                          Cena (bez DPH) od:
                          97.11 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Standard Solid Drill with Coating
                          • SLEVA
                          • Volume Discount

                          ATOM

                          Standard Solid Drill with Coating

                          ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.3 ~ 64 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎]Carbide30 ~ 80Straight ShankAvailableTiAlNN/A
                          Cena (bez DPH) od:
                          22.38 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • Sweep Cut Drill Straight Shank

                            ATOM

                            Sweep Cut Drill Straight Shank

                            Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            1 ~ 616 ~ 50Aluminum[◎] / Resin[◎]Carbide50 ~ 102End Mill ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            47.90 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Super Long Drill
                            • Volume Discount

                            ATOM

                            Super Long Drill

                            ADS standard straight shank drill extra-long type.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.3 ~ 1315 ~ 120General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎]Carbide75 ~ 250Straight ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            29.54 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Hi-Spec Micro Drill
                            • SLEVA
                            • Volume Discount

                            ATOM

                            Hi-Spec Micro Drill

                            The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.035 ~ 1.9950.4 ~ 22General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            40.91 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • Long Drill
                            • Volume Discount

                            ATOM

                            Long Drill

                            ADS standard straight shank drill long type.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.3 ~ 1310 ~ 90General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide60 ~ 200Straight ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            26.55 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Standard Solid Drill
                            • SLEVA
                            • Volume Discount

                            ATOM

                            Standard Solid Drill

                            A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.3 ~ 134 ~ 50General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide30 ~ 100Straight ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            16.75 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • Straight Drill
                            • SLEVA
                            • Volume Discount

                            ISHIHASHI

                            Straight Drill【1 až 2 kusů】

                            A grinding drill produced using Swedish technology and an American automatic grinding machine, with grooves produced by a grindstone after heat treatment.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 8.57.5 ~ 87General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel27 ~ 121Straight ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            4.76 €
                            Speciální cena
                            Běžné datum odeslání:
                            Skladová položka: 1 pracovní den
                            Některé položky lze dodat ve stejný den
                            Konfigurovat
                          • Extra Masamune Drill Set
                            • Volume Discount

                            ISHIHASHI

                            Extra Masamune Drill Set【10 až 100 kusů】

                            The tip is cross thinned for a quick bite with excellent sharpness.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            --General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel-Straight ShankN/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            69.93 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • End Mill Shank Drill 3 X D for Carbide Processing H 1946

                              GUHRING

                              End Mill Shank Drill 3 X D for Carbide Processing H 1946

                              High-rigidity design capable of drilling holes in hardened steel up to 70 HRC.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              3 ~ 1220 ~ 55-Carbide62 ~ 102End Mill ShankAvailableTiAlNN/A
                              Cena (bez DPH) od:
                              145.25 €
                              Běžné datum odeslání:
                              24 pracovních dnů
                              Konfigurovat
                            • Straight Shank Drill, Stub Type N 223
                              • SLEVA
                              • Volume Discount

                              GUHRING

                              Straight Shank Drill, Stub Type N 223

                              Versatile drill for general applications.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              2.1 ~ 1812 ~ 62General Steel[○] / Cast Iron[◎] / Aluminum[○] / Resin[○]High-speed steel38 ~ 123Straight ShankAvailableOtherN/A
                              Cena (bez DPH) od:
                              8.92 €
                              Speciální cena
                              Běžné datum odeslání:
                              Skladová položka: 1 pracovní den
                              Některé položky lze dodat ve stejný den
                              Konfigurovat
                            • Straight-Shank Drill, General-Purpose Drill, Regular Type N, 205
                              • SLEVA
                              • Volume Discount

                              GUHRING

                              Straight-Shank Drill, General-Purpose Drill, Regular Type N, 205

                              Standard drill for general drilling applications.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              1 ~ 1612 ~ 120General Steel[○] / Cast Iron[◎] / Aluminum[○] / Resin[○]High-speed steel34 ~ 178Straight ShankAvailableOtherN/A
                              Cena (bez DPH) od:
                              3.01 €
                              Speciální cena
                              Běžné datum odeslání:
                              Skladová položka: 1 pracovní den
                              Některé položky lze dodat ve stejný den
                              Konfigurovat
                            • Straight Shank Drill, Regular Type N 651
                              • Volume Discount

                              GUHRING

                              Straight Shank Drill, Regular Type N 651

                              Versatile coated drill for general drilling applications.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.2 ~ 192.5 ~ 135General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]High-speed steel19 ~ 198Straight ShankAvailableTiNN/A
                              Cena (bez DPH) od:
                              10.19 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Tip for HT800WP Only 4112

                                GUHRING

                                Tip for HT800WP Only 4112

                                A widely applicable insert used for materials from general steel to stainless steel.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                --General Steel[○]Carbide--AvailableOtherN/A
                                Cena (bez DPH) od:
                                107.28 €
                                Běžné datum odeslání:
                                8 pracovních dnů
                                Konfigurovat
                              • Micro Drill, Type-N 3899
                                • Volume Discount

                                GUHRING

                                Micro Drill, Type-N 3899

                                Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                0.1 ~ 31.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide38-AvailableTiAlNN/A
                                Cena (bez DPH) od:
                                54.95 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • Micro Drill, Type-N 660

                                  GUHRING

                                  Micro Drill, Type-N 660

                                  Coated drill for small diameter hole drilling.
                                  Více informací
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.16 ~ 1.91.1 ~ 11.8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Cobalt HSS25 ~ 30-AvailableTiNN/A
                                  Cena (bez DPH) od:
                                  23.03 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • Top Solid Tapered Shank Twist Drill DTD

                                    DIJET

                                    Top Solid Tapered Shank Twist Drill DTD

                                    [Features]· It is a tool with excellent abrasion resistance.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    6 ~ 3068 ~ 188Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide148 ~ 305Taper shankN/ANon-CoatedN/A
                                    Cena (bez DPH) od:
                                    202.21 €
                                    Běžné datum odeslání:
                                    8 pracovních dnů
                                    Konfigurovat
                                  • Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM
                                    • Volume Discount

                                    EIKOSHA

                                    Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM

                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3.4 ~ 2013 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel65 ~ 145Straight ShankAvailableOtherN/A
                                    Cena (bez DPH) od:
                                    74.70 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Carbide Flat Drill ADFLS-2D
                                    • Volume Discount

                                    OSG

                                    Carbide Flat Drill ADFLS-2D

                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 2015 ~ 88General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide100 ~ 250End Mill Shank / Straight ShankAvailableOtherN/A
                                    Cena (bez DPH) od:
                                    89.70 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • MC Drill MCD
                                    • Volume Discount

                                    NACHI(FUJIKOSHI)

                                    MC Drill MCD

                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    24 ~ 25107General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS177 ~ 180Straight ShankN/ANon-CoatedN/A
                                    Cena (bez DPH) od:
                                    174.51 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • TS Coated Carbide Composite Spiral Drill, Stub Model
                                    • Volume Discount

                                    MISUMI

                                    TS Coated Carbide Composite Spiral Drill, Stub Model

                                    [Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1220 ~ 55General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide50 ~ 115End Mill ShankAvailable-N/A
                                    Cena (bez DPH) od:
                                    100.34 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

                                    [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1320 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide62 ~ 107End Mill ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    55.49 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

                                    3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    2 ~ 1312 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    60.30 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide Double Margin Drill, Regular
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Double Margin Drill, Regular

                                    [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    1 ~ 1112 ~ 71General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    81.68 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

                                    [Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1320 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide66 ~ 107End Mill ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    43.35 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

                                    By applying three rake + R thinning, it demonstrates a high level of afferent.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1328 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    51.31 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

                                    [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3 ~ 1316 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
                                    Cena (bez DPH) od:
                                    40.76 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat