Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (With/without Oil Hole: N/A Stránka 4)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Regular Type for General Machining EX-GDR
      • Volume Discount

      OSG

      Regular Type for General Machining EX-GDR

      [Features] With an overall length of 59 mm to 235 mm, it is a highly versatile drill that provides high-speed stepless machining up to 4 to 5 times the diameter.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 3224 ~ 165General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○]Cobalt HSS56 ~ 245End Mill Shank / Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      12.10 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Long Type for General Machining EX-GDXL
      • SLEVA
      • Volume Discount

      OSG

      Long Type for General Machining EX-GDXL

      Due to high rigidity parabolic groove, performs deep hole drilling of up to 7-10 times the diameter
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1340 ~ 200General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○]Cobalt HSS100 ~ 300Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      27.90 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • For Lathe V-MT-GDN
      • Volume Discount

      OSG

      For Lathe V-MT-GDN

      Particular attention to the low-thrust reduction, V coating taper shank, and medium-shaped drill can be easily used in lathe
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      6 ~ 3243 ~ 128General Steel[◎] / Quenched and tempered steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]High Vanadium HSS123 ~ 248End Mill ShankAvailableOtherN/A
      Cena (bez DPH) od:
      66.00 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • General-Purpose Straight V-SDR
      • Volume Discount

      OSG

      General-Purpose Straight V-SDR

      [Features] With an overall length of 61 mm to 142 mm, it is a versatile drill that can be used on any low to medium speed machine.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2.9 ~ 8.733 ~ 81General Steel[◎] / Cast Iron[○] / Aluminum[○]High Vanadium HSS61 ~ 125Straight ShankAvailableOtherN/A
      Cena (bez DPH) od:
      10.30 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • UTDSX UT Micro Coat, Unimax Drill, Short Blade

        UNION TOOL

        UTDSX UT Micro Coat, Unimax Drill, Short Blade

        [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.3 ~ 21.5 ~ 10General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableTiCNN/A
        Cena (bez DPH) od:
        19.21 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • C-UMD Iron and Steel Drill, Unimax Drill
        • Volume Discount

        UNION TOOL

        C-UMD Iron and Steel Drill, Unimax Drill

        [Features] -UT micro-coating.Tip angle 150-Tool material: carbide.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.11 ~ 2.851.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableOtherN/A
        Cena (bez DPH) od:
        20.19 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • NSPD Micro Point Drill (Pilot Hole Machining)
        • Volume Discount

        NS TOOL

        NSPD Micro Point Drill (Pilot Hole Machining)

        The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.01 ~ 0.10.015 ~ 0.2Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
        Cena (bez DPH) od:
        48.72 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • NSMD-S Micro Drill, Short

          NS TOOL

          NSMD-S Micro Drill, Short

          A short type with groove length 6 times the blade diameter, capable of stable machining
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.01 ~ 0.050.06 ~ 0.3General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
          Cena (bez DPH) od:
          115.66 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • MSDH Drill for Small Diameter High-Hardness Processing
          • Volume Discount

          NS TOOL

          MSDH Drill for Small Diameter High-Hardness Processing

          Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.1 ~ 10.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide45End Mill ShankAvailableTiAlNN/A
          Cena (bez DPH) od:
          57.89 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • NSMD-M MUGEN Micro Coating Micro Drill
          • Volume Discount

          NS TOOL

          NSMD-M MUGEN Micro Coating Micro Drill

          With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.01 ~ 0.10.1 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
          Cena (bez DPH) od:
          63.40 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • NSMD-MS MUGEN Micro Coating Micro Drill Short

            NS TOOL

            NSMD-MS MUGEN Micro Coating Micro Drill Short

            With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.01 ~ 0.050.06 ~ 0.3General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
            Cena (bez DPH) od:
            125.75 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)
            • Volume Discount

            NS TOOL

            NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)

            With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.01 ~ 0.10.015 ~ 0.2General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
            Cena (bez DPH) od:
            63.40 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Thruster Drills 10D Type
            • Volume Discount

            OSG

            Thruster Drills 10D Type

            Long drill bit that has achieved ultra-deep drilling up to 10D with HSS drill bit.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            1.5X10D ~ 12×10D26 ~ 155General Steel[◎] / Cast Iron[◎] / Aluminum[◎]Cobalt HSS70 ~ 215Straight ShankAvailableOtherN/A
            Cena (bez DPH) od:
            22.14 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Carbide Drill Phoenix Drill

              OSG

              Carbide Drill Phoenix Drill

              Indexable drill that achieves high machining efficiency and excellent chip disposal Provides excellent economy due to the 4-corner insert.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              14 ~ 4042 ~ 120General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide116 ~ 227End Mill Shank / Straight ShankN/ANon-CoatedN/A
              Cena (bez DPH) od:
              411.20 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Carbide Drill Carbide for High Hardness Steel (From 70HRC)
              • Volume Discount

              OSG

              Carbide Drill Carbide for High Hardness Steel (From 70HRC)

              Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 1212 ~ 76High Hardness Steel[◎]Carbide42 ~ 120End Mill Shank / Straight ShankAvailableOtherN/A
              Cena (bez DPH) od:
              102.10 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Carbide Edged Tip Straight Shank Drill
              • Volume Discount

              FUKUDA

              Carbide Edged Tip Straight Shank Drill

              Economical brazing type. A drill for cast iron and non-ferrous metals which maintains the excellent characteristics of carbide alloy along with excellent cost-performance, as it can be repolished any number of times. The shank is the same as the blade/cutting diameter.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.2 ~ 1243 ~ 105Cast Iron[◎] / Aluminum[○]-75 ~ 155Straight ShankN/A-N/A
              Cena (bez DPH) od:
              77.67 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Carbide Solid Tip Straight Shank Drill

                FUKUDA

                Carbide Solid Tip Straight Shank Drill

                A carbide tip is brazed, is ideal for drilling aluminum alloy, cast iron, etc.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                6 ~ 2560 ~ 160Cast Iron[◎] / Aluminum[○]-115 ~ 240End Mill ShankN/A-N/A
                Cena (bez DPH) od:
                277.66 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • GP Drill Regular 10D ALT Coating
                • Volume Discount

                IWATA TOOL

                GP Drill Regular 10D ALT Coating

                Allows non-step boring up to 3D hole depth (up to 7D in some situations). High precision and super long life.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                0.3 ~ 33.7 ~ 36.5General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]Carbide40 ~ 60End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                45.63 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • TFD Carbide Drill with TiCN Coating
                • Volume Discount

                IWATA TOOL

                TFD Carbide Drill with TiCN Coating

                Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                0.3 ~ 31.8 ~ 16.8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide50End Mill ShankAvailableTiCNN/A
                Cena (bez DPH) od:
                68.02 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Toglon Hard Drill Short ALD Coating
                • SLEVA
                • Volume Discount

                IWATA TOOL

                Toglon Hard Drill Short ALD Coating

                [Features]· Outstanding performance compared to conventional high hardness types.· 3-flute design gives a finish with outstanding hole diameter accuracy and hole surface roughness.· Hole position accuracy improved by use with Toglon® Hard SP
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                1 ~ 126 ~ 51High Hardness Steel[○]Carbide50 ~ 110End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                74.53 €
                Speciální cena
                Běžné datum odeslání:
                Skladová položka: 1 pracovní den
                Některé položky lze dodat ve stejný den
                Konfigurovat
              • Toglon Hard Drill Regular ALT Coating
                • SLEVA
                • Volume Discount

                IWATA TOOL

                Toglon Hard Drill Regular ALT Coating

                · 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                1 ~ 66 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide50 ~ 120End Mill ShankAvailableTiAlNN/A
                Cena (bez DPH) od:
                89.60 €
                Speciální cena
                Běžné datum odeslání:
                Skladová položka: 1 pracovní den
                Některé položky lze dodat ve stejný den
                Konfigurovat
              • Toglon Hard Long Drill 20D ALT Coating

                  IWATA TOOL

                  Toglon Hard Long Drill 20D ALT Coating

                  [Features]· Realizes through-holes of 20D or more in quenched steel.· H7 or greater accuracy is possible due to the extremely high circularity and cylindricity and excellent surface roughness.· Can also machine mold ejector pin holes, etc., in one go without a pilot hole.· Reduced processes can help to shorten lead time.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1.1 ~ 66.6 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide60 ~ 200End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  97.11 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Toglon Miniature Hard Drill Stub ALT Coating
                  • Volume Discount

                  IWATA TOOL

                  Toglon Miniature Hard Drill Stub ALT Coating

                  Outstanding performance compared to conventional high hardness types. 3-flute design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.1 ~ 20.6 ~ 12High Hardness Steel[○]Carbide50End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  60.71 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Toglon Miniature Hard Drill Regular ALT Coating
                  • Volume Discount

                  IWATA TOOL

                  Toglon Miniature Hard Drill Regular ALT Coating

                  Outstanding performance compared to conventional high hardness types. 3-flute design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.1 ~ 20.6 ~ 12High Hardness Steel[○]Carbide50End Mill ShankAvailableTiAlNN/A
                  Cena (bez DPH) od:
                  71.76 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Twisted Crescent Drill Carbide
                  • Volume Discount

                  IWATA TOOL

                  Twisted Crescent Drill Carbide

                  Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.1 ~ 30.6 ~ 16.8General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide50End Mill ShankN/ANon-CoatedN/A
                  Cena (bez DPH) od:
                  38.16 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Twisted Crescent Drill Carbide DLC Coating
                  • Volume Discount

                  IWATA TOOL

                  Twisted Crescent Drill Carbide DLC Coating

                  Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  0.1 ~ 30.6 ~ 16.8Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide50End Mill ShankAvailableDLCN/A
                  Cena (bez DPH) od:
                  70.82 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Sweep Cut Drill Straight Shank

                    ATOM

                    Sweep Cut Drill Straight Shank

                    Drastically reduces the burrs of through holes. Achieves high hole position and hole diameter precision by suppressing bit runout and deflection when biting. Suppresses hole bending.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1 ~ 616 ~ 50Aluminum[◎] / Resin[◎]Carbide50 ~ 102End Mill ShankN/ANon-CoatedN/A
                    Cena (bez DPH) od:
                    47.90 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Super Long Drill
                    • Volume Discount

                    ATOM

                    Super Long Drill

                    ADS standard straight shank drill extra-long type.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.3 ~ 1315 ~ 120General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎]Carbide75 ~ 250Straight ShankN/ANon-CoatedN/A
                    Cena (bez DPH) od:
                    29.54 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Solid Semi-Long Drill
                    • SLEVA
                    • Volume Discount

                    ATOM

                    Solid Semi-Long Drill

                    A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.3 ~ 138 ~ 70General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide40 ~ 149Straight ShankN/ANon-CoatedN/A
                    Cena (bez DPH) od:
                    19.59 €
                    Speciální cena
                    Běžné datum odeslání:
                    Skladová položka: 1 pracovní den
                    Některé položky lze dodat ve stejný den
                    Konfigurovat
                  • Micro Drill "NEO PRO" Short Blades
                    • SLEVA
                    • Volume Discount

                    ATOM

                    Micro Drill "NEO PRO" Short Blades

                    A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.1 ~ 2.990.6 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                    Cena (bez DPH) od:
                    34.33 €
                    Speciální cena
                    Běžné datum odeslání:
                    Skladová položka: 1 pracovní den
                    Některé položky lze dodat ve stejný den
                    Konfigurovat
                  • Micro Drill "NEO PRO" Standard Blade Length
                    • SLEVA
                    • Volume Discount

                    ATOM

                    Micro Drill "NEO PRO" Standard Blade Length

                    A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.03 ~ 30.3 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38 ~ 50End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                    Cena (bez DPH) od:
                    34.30 €
                    Speciální cena
                    Běžné datum odeslání:
                    Skladová položka: 1 pracovní den
                    Některé položky lze dodat ve stejný den
                    Konfigurovat
                  • MAXAL Drill for Aluminium
                    • Volume Discount

                    ATOM

                    MAXAL Drill for Aluminium

                    With the tip and groove shapes specially designed for aluminum, it discharges cutting chips smoothly. The tip has been given a thinning finish, so it bites in well and suppresses hole bending.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1 ~ 1215 ~ 50Aluminum[◎]Carbide40 ~ 100Straight ShankN/ANon-CoatedN/A
                    Cena (bez DPH) od:
                    20.18 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Micro Drill Short Tip

                      ATOM

                      Micro Drill Short Tip

                      A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.1 ~ 30.6 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38End Mill ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      28.74 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Long Drill
                      • Volume Discount

                      ATOM

                      Long Drill

                      ADS standard straight shank drill long type.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.3 ~ 1310 ~ 90General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide60 ~ 200Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      26.55 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Small Diameter Spiral Flute, 1 mm Shank
                      • Volume Discount

                      ATOM

                      Small Diameter Spiral Flute, 1 mm Shank

                      A 1 mm shank drill for precision multiporous machining.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.05 ~ 0.990.5 ~ 9.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[◎]Carbide30End Mill ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      18.99 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Straight Drill
                      • SLEVA
                      • Volume Discount

                      ISHIHASHI

                      Straight Drill【1 až 2 kusů】

                      A grinding drill produced using Swedish technology and an American automatic grinding machine, with grooves produced by a grindstone after heat treatment.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.5 ~ 8.57.5 ~ 87General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel27 ~ 121Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      4.76 €
                      Speciální cena
                      Běžné datum odeslání:
                      Skladová položka: 1 pracovní den
                      Některé položky lze dodat ve stejný den
                      Konfigurovat
                    • Extra Masamune Drill
                      • SLEVA
                      • Volume Discount

                      ISHIHASHI

                      Extra Masamune Drill

                      The tip is cross thinned for a quick bite with excellent sharpness.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3.3 ~ 6.845 ~ 73General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel73 ~ 105Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      5.81 €
                      Speciální cena
                      Běžné datum odeslání:
                      Skladová položka: 1 pracovní den
                      Některé položky lze dodat ve stejný den
                      Konfigurovat
                    • OK Coat Carbide NC Point Drill SNPDA
                      • Volume Discount

                      OKAZAKI SEIKO

                      OK Coat Carbide NC Point Drill SNPDA

                      A point drill bit optimal for chamfering or positioning when drilling.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3 ~ 128 ~ 30General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]Carbide50 ~ 110Straight ShankAvailableTiAlNN/A
                      Cena (bez DPH) od:
                      37.46 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Solid Carbide Drill for Cast Iron / Nonferrous SSN
                      • Volume Discount

                      OKAZAKI SEIKO

                      Solid Carbide Drill for Cast Iron / Nonferrous SSN

                      It is a drill with X thinning shaped tip, suitable for drilling cast iron and nonferrous metals.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.5 ~ 136 ~ 60General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide45 ~ 118Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      33.40 €
                      Běžné datum odeslání:
                      7 pracovních dnů
                      Konfigurovat
                    • Solid Carbide Drill for DLC Coated Aluminium / Steel SSND
                      • Volume Discount

                      OKAZAKI SEIKO

                      Solid Carbide Drill for DLC Coated Aluminium / Steel SSND

                      The weld prevention effect of the pure DLC coating provides an astonishingly long service life.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      2.5 ~ 1315 ~ 60General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide50 ~ 118End Mill Shank / Straight ShankAvailableDLCN/A
                      Cena (bez DPH) od:
                      59.82 €
                      Běžné datum odeslání:
                      10 pracovních dnů
                      Konfigurovat
                    • Tapered Shank Drill TD
                      • Volume Discount

                      OKAZAKI SEIKO

                      Tapered Shank Drill TD

                      A wide variety of shanks are available. Uses MCo material (cobalt high speed steel). Oxidized item.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      14.5 ~ 120122 ~ 370General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Cobalt HSS222 ~ 612Taper shankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      73.03 €
                      Běžné datum odeslání:
                      7 pracovních dnů
                      Konfigurovat
                    • Ultra Musashi Drill (Includes Blister Pack)
                      • SLEVA
                      • Volume Discount

                      ISHIHASHI

                      Ultra Musashi Drill (Includes Blister Pack)

                      Unique thinning enables drilling of perfectly circular holes with no back burrs.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3.3 ~ 745 ~ 73General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel73 ~ 105Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      5.71 €
                      Speciální cena
                      Běžné datum odeslání:
                      Skladová položka: 1 pracovní den
                      Některé položky lze dodat ve stejný den
                      Konfigurovat
                    • Straight Drill Set
                      • Volume Discount

                      ISHIHASHI

                      Straight Drill Set【13 až 100 kusů】

                      A grinding drill produced using Swedish technology and an American automatic grinding machine, with grooves produced by a grindstone after heat treatment.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel-Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      74.40 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Extra Masamune Drill Set
                      • Volume Discount

                      ISHIHASHI

                      Extra Masamune Drill Set【10 až 100 kusů】

                      The tip is cross thinned for a quick bite with excellent sharpness.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel-Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      69.93 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • F1 Drill DX-SFDM Type

                        DIJET

                        F1 Drill DX-SFDM Type

                        It features stable machinability and long tool life, and enables highly efficient machining. As it is made of TiCN material, it is abrasion resistant, corrosion resistant, heat resistant and has low friction properties.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        16.5 ~ 20112 ~ 114General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide167 ~ 179Straight ShankAvailableTiCNN/A
                        Cena (bez DPH) od:
                        325.53 €
                        Běžné datum odeslání:
                        8 pracovních dnů
                        Konfigurovat