Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
    • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

      3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1312 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      60.30 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Double Margin Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Double Margin Drill, Regular

      [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 1112 ~ 71General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      81.68 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

      [Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 60General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide66 ~ 107End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      43.35 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

      By applying three rake + R thinning, it demonstrates a high level of afferent.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      51.31 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

      [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      40.76 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 820 ~ 41General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      40.39 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 78General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○]Carbide46 ~ 137Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      36.40 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Straight Shank / Stub Model
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Straight Shank / Stub Model

      [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 86 ~ 37General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide26 ~ 79Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      20.63 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Straight Shank / Regular

      [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 812 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide34 ~ 117Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      22.24 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Long Drill, Straight Shank
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Long Drill, Straight Shank

      Carbide long drill that achieves the high efficiency deep-hole drilling
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1060 ~ 140General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide100 ~ 200Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      100.26 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
      • Volume Discount

      MISUMI

      TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub

      [Features] -Weak helix and large core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed-Ideal for machining high hardness steel from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 60Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide62 ~ 107End Mill ShankAvailable-N/A
      Cena (bez DPH) od:
      63.39 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
      • Volume Discount

      MISUMI

      TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

      [Features] -Weak helix angle and high core diameter improve the rigidity of the tool-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 77Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide62 ~ 124End Mill ShankAvailable-N/A
      Cena (bez DPH) od:
      56.38 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
      • Volume Discount

      MISUMI

      TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular

      [Features] -Weak spiral angle and high core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 78Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide46 ~ 137Straight ShankAvailable-N/A
      Cena (bez DPH) od:
      53.49 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
      • Volume Discount

      MISUMI

      TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

      A small radius type of the high-hardness steel series
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.8 ~ 36 ~ 27General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide47 ~ 67End Mill ShankAvailable-N/A
      Cena (bez DPH) od:
      42.03 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

      [Features] -MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining-Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining-125° tip angle and combined helix angle improve cutting performance.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1028 ~ 61Stainless Steel[◎]Carbide60 ~ 120End Mill ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      117.87 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • DLC Coated Carbide Drill for Aluminium Machining, Composite Spiral / Regular Model
      • Volume Discount

      MISUMI

      DLC Coated Carbide Drill for Aluminium Machining, Composite Spiral / Regular Model

      [Features] -Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-120° tip angle and combined helix angle improve durability when machining aluminium.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      5 ~ 6.544 ~ 53Aluminum[◎]Carbide90 ~ 110End Mill ShankAvailableDLCN/A
      Cena (bez DPH) od:
      166.31 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • DLC Coated Carbide Drill for Aluminium Machining, Regular
      • Volume Discount

      MISUMI

      DLC Coated Carbide Drill for Aluminium Machining, Regular

      [Features] -The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper-The high helix shape provides excellent chip evacuation and sharpness-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      5.52 ~ 11.3841 ~ 71Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide85 ~ 128End Mill ShankAvailableDLCN/A
      Cena (bez DPH) od:
      83.76 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        MISUMI

        Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model

        [Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-Straight ShankN/A-N/A
        Běžné datum odeslání:
        12 pracovních dnů
        Konfigurovat
      • DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub
        • Volume Discount

        MISUMI

        DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub

        [Features]-Excellent chip evacuation and sharpness due to high spiral shape-Designed for frequent pre-drilling of M4 to M12 metric coarse holes-2 types of step angles are available for chamfering and cutting-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        6.8 ~ 10.348 ~ 72Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide104 ~ 136Straight ShankAvailableDLCN/A
        Cena (bez DPH) od:
        97.95 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Carbide Burnishing Drill Bit, Long Shank Type

          MISUMI

          Carbide Burnishing Drill Bit, Long Shank Type

          [Features]・Ideal for step drilling aluminum.・Long shank types are now available.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          --Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • Carbide Step Drill Bit, With Custom Dimensions

            MISUMI

            Carbide Step Drill Bit, With Custom Dimensions

            [Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
            Běžné datum odeslání:
            9 pracovních dnů
            Konfigurovat
          • Aqua Drill 3-Flute AQD3F

              NACHI(FUJIKOSHI)

              Aqua Drill 3-Flute AQD3F

              Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              4.21 ~ 12.5522 ~ 51General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○]Carbide66 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
              Cena (bez DPH) od:
              111.82 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Aqua Drill Regular AQDR
              • Volume Discount

              NACHI(FUJIKOSHI)

              Aqua Drill Regular AQDR

              Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.7 ~ 1024 ~ 60General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]Carbide56 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
              Cena (bez DPH) od:
              84.41 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Aqua Drill with Bottom Blade 3-Flute AQDED3F

                NACHI(FUJIKOSHI)

                Aqua Drill with Bottom Blade 3-Flute AQDED3F

                For opening core holes or high precision boring. Achieves high efficiency machining with excellent positioning correction ability.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                628General Steel[◎] / Cast Iron[○]Carbide72Straight ShankAvailableOtherN/A
                Cena (bez DPH) od:
                140.20 €
                Běžné datum odeslání:
                10 pracovních dnů
                Konfigurovat
              • Aqua Drill EX Regular AQDEXR

                  NACHI(FUJIKOSHI)

                  Aqua Drill EX Regular AQDEXR

                  Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  2.9 ~ 1519 ~ 91General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]Carbide49 ~ 153End Mill Shank / Straight ShankAvailableOtherN/A
                  Cena (bez DPH) od:
                  108.81 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Aqua Drill FC AQDFC

                    NACHI(FUJIKOSHI)

                    Aqua Drill FC AQDFC

                    Ideal for long-life processing of FC, FCD and low carbon steel.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    2.1 ~ 11.915 ~ 73General Steel[◎] / Cast Iron[◎]Carbide47 ~ 130End Mill ShankAvailableOtherN/A
                    Cena (bez DPH) od:
                    107.64 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Aqua Drill Hard AQDH

                      NACHI(FUJIKOSHI)

                      Aqua Drill Hard AQDH

                      Highly efficient processing of 50-68 HRC tempered steel is possible.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      2 ~ 9.912 ~ 43High Hardness Steel[◎]Carbide44 ~ 93End Mill Shank / Straight ShankAvailableOtherN/A
                      Cena (bez DPH) od:
                      34.41 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Aqua Micro Drill AQMD
                      • SLEVA
                      • Volume Discount

                      NACHI(FUJIKOSHI)

                      Aqua Micro Drill AQMD

                      Capable of stable drilling of small diameter holes. Well suited for machining of materials ranging from green timber to high hardness steel.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.21 ~ 1.72.5 ~ 15General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]Carbide38 ~ 47End Mill ShankAvailableOtherN/A
                      Cena (bez DPH) od:
                      38.11 €
                      Speciální cena
                      Běžné datum odeslání:
                      Skladová položka: 1 pracovní den
                      Některé položky lze dodat ve stejný den
                      Konfigurovat
                    • Aqua Drill Stub AQDS

                        NACHI(FUJIKOSHI)

                        Aqua Drill Stub AQDS

                        Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        4 ~ 12.522 ~ 51General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○]Carbide54 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
                        Cena (bez DPH) od:
                        53.04 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Diamond-Coated Super Hard D-GDN

                          OSG

                          Diamond-Coated Super Hard D-GDN

                          Excellent power of course against aluminum alloys, but especially against high silicon aluminum alloys for a extremely short-life carbide drill
                          Více informací
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          2 ~ 1218 ~ 76Aluminum[◎] / Copper[○]Carbide54 ~ 126End Mill Shank / Straight ShankAvailableDia CoatN/A
                          Cena (bez DPH) od:
                          94.07 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • 3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS

                            OSG

                            3 Flute Long Neck Type Carbide for High Hardness Steel FHL-GDTS

                            The processing of ultra-deep hole of 10d ~ 20D in hardened steel, which could not be achieved only by electrical discharge machining, is now possible with high accuracy, while significant reduction in the total drilling time is achieved.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            1 ~ 35 ~ 15Quenched and tempered steel[○] / High Hardness Steel[◎]Carbide57 ~ 65End Mill Shank / Straight ShankAvailableOtherN/A
                            Cena (bez DPH) od:
                            67.60 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D

                              OSG

                              Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D

                              By using carbide materials, it has high hardness and high modulus of elasticity, which enables drilling of extremely small holes in general steel, heat-treated steel and high hardness steel.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.02 ~ 0.080.22 ~ 0.88Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]Carbide38End Mill ShankAvailableOtherN/A
                              Cena (bez DPH) od:
                              106.94 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D

                                OSG

                                Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D

                                UVM ultra-small diameter drill, type 5D, for holes with a minimum diameter of ø0.02.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                0.02 ~ 0.080.12 ~ 0.48Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]Carbide38End Mill ShankAvailableOtherN/A
                                Cena (bez DPH) od:
                                91.21 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • Carbide Very Small Diameter Drill Leading Drill UVM-LDS

                                  OSG

                                  Carbide Very Small Diameter Drill Leading Drill UVM-LDS

                                  Collaboration with UVM-DRL enables high precision drilling
                                  Více informací
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.050.075Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]Carbide38End Mill ShankAvailableOtherN/A
                                  Cena (bez DPH) od:
                                  153.29 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN
                                  • Volume Discount

                                  OSG

                                  Medium Type Carbide for Machining Non-Ferrous Metals NF-GDN

                                  Achieves High Cost Performance in High Speed Hole Drilling of Cast Aluminum, Die Cast Aluminum, Malleable Aluminum etc. Used Extensively in Automobile / Airplane Manufacturing
                                  Více informací
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  3 ~ 1325 ~ 76Cast Iron[◎] / Aluminum[◎] / Copper[○]Carbide59 ~ 128End Mill Shank / Straight ShankN/ANon-CoatedN/A
                                  Cena (bez DPH) od:
                                  18.82 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • UTDSX UT Micro Coat, Unimax Drill, Short Blade

                                    UNION TOOL

                                    UTDSX UT Micro Coat, Unimax Drill, Short Blade

                                    [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.3 ~ 21.5 ~ 10General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableTiCNN/A
                                    Cena (bez DPH) od:
                                    19.21 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • C-UMD Iron and Steel Drill, Unimax Drill
                                    • Volume Discount

                                    UNION TOOL

                                    C-UMD Iron and Steel Drill, Unimax Drill

                                    [Features] -UT micro-coating.Tip angle 150-Tool material: carbide.
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.11 ~ 2.851.2 ~ 12General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide38End Mill ShankAvailableOtherN/A
                                    Cena (bez DPH) od:
                                    20.19 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • NSPD Micro Point Drill (Pilot Hole Machining)
                                    • Volume Discount

                                    NS TOOL

                                    NSPD Micro Point Drill (Pilot Hole Machining)

                                    The tip is thinned to reduce cutting resistance. Stable Drilling Accuracy (φ0.025 or more)
                                    Více informací
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.01 ~ 0.10.015 ~ 0.2Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
                                    Cena (bez DPH) od:
                                    48.72 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • NSMD-S Micro Drill, Short

                                      NS TOOL

                                      NSMD-S Micro Drill, Short

                                      A short type with groove length 6 times the blade diameter, capable of stable machining
                                      Více informací
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      0.01 ~ 0.050.06 ~ 0.3General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Carbide40End Mill ShankN/A-N/A
                                      Cena (bez DPH) od:
                                      115.66 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • MSDH Drill for Small Diameter High-Hardness Processing
                                      • Volume Discount

                                      NS TOOL

                                      MSDH Drill for Small Diameter High-Hardness Processing

                                      Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.
                                      Více informací
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      0.1 ~ 10.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide45End Mill ShankAvailableTiAlNN/A
                                      Cena (bez DPH) od:
                                      57.89 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • NSMD-M MUGEN Micro Coating Micro Drill
                                      • Volume Discount

                                      NS TOOL

                                      NSMD-M MUGEN Micro Coating Micro Drill

                                      With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                                      Více informací
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      0.01 ~ 0.10.1 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
                                      Cena (bez DPH) od:
                                      63.40 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • NSMD-MS MUGEN Micro Coating Micro Drill Short

                                        NS TOOL

                                        NSMD-MS MUGEN Micro Coating Micro Drill Short

                                        With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                                        Více informací
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        0.01 ~ 0.050.06 ~ 0.3General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
                                        Cena (bez DPH) od:
                                        125.75 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)
                                        • Volume Discount

                                        NS TOOL

                                        NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)

                                        With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                                        Více informací
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        0.01 ~ 0.10.015 ~ 0.2General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]Carbide40End Mill ShankAvailableTiAlNN/A
                                        Cena (bez DPH) od:
                                        63.40 €
                                        Běžné datum odeslání:
                                        6 pracovních dnů
                                        Konfigurovat
                                      • Carbide Drill Phoenix Drill

                                          OSG

                                          Carbide Drill Phoenix Drill

                                          Indexable drill that achieves high machining efficiency and excellent chip disposal Provides excellent economy due to the 4-corner insert.
                                          Více informací
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          14 ~ 4042 ~ 120General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide116 ~ 227End Mill Shank / Straight ShankN/ANon-CoatedN/A
                                          Cena (bez DPH) od:
                                          411.20 €
                                          Běžné datum odeslání:
                                          6 pracovních dnů
                                          Konfigurovat
                                        • Carbide Drill Carbide for High Hardness Steel (From 70HRC)
                                          • Volume Discount

                                          OSG

                                          Carbide Drill Carbide for High Hardness Steel (From 70HRC)

                                          Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.
                                          Více informací
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          2 ~ 1212 ~ 76High Hardness Steel[◎]Carbide42 ~ 120End Mill Shank / Straight ShankAvailableOtherN/A
                                          Cena (bez DPH) od:
                                          102.10 €
                                          Běžné datum odeslání:
                                          6 pracovních dnů
                                          Konfigurovat