Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • Shank Type
  • Coating Y/N
    • Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS
      • SLEVA
      • Volume Discount

      OSG

      Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS

      [Features] A drill bit with an overall length of 38 mm to 170 mm.[Features] Can be used for stainless steel, mild steel, copper alloys, etc.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.5 ~ 323 ~ 90General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS38 ~ 170End Mill Shank / Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      11.10 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • High-Speed Steel Drill, Straight Shank / Long
      • Volume Discount

      MISUMI

      High-Speed Steel Drill, Straight Shank / Long

      [Features] A selection of commonly used sizes-Long shank drill with straight shank for deep drilling.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1085 ~ 185General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel125 ~ 265Straight ShankN/A-N/A
      Cena (bez DPH) od:
      8.18 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR
      • SLEVA
      • Volume Discount

      OSG

      Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR

      A standard lineup of long flute end mill drills suited for machining of stainless steel, mild steel, aluminum alloy, and cupper alloy
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 3224 ~ 165General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS56 ~ 245End Mill Shank / Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      13.40 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • High-Speed Steel Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      High-Speed Steel Drill, Straight Shank / Regular【1 až 10 kusů】

      [Features] Packing of commonly used sizes in packs-Two-shank drill with TiN-coated high-speed steel for general applications.
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.2 ~ 133 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel / Cobalt HSS19 ~ 151Straight ShankAvailable / N/ATiNN/A
      Cena (bez DPH) od:
      6.75 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • TiN Coated High-Speed Steel Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1 až 10 kusů】

      With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty
      Více informací
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 12.512 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS34 ~ 151Straight ShankAvailableTiNN/A
      Cena (bez DPH) od:
      13.33 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

        OSG

        EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

        HSSE drill with TIN coating, up to 3xD - For stainless steel, low carbon steel and cast aluminum
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        ---------
        Cena (bez DPH) od:
        87.20 €
        Běžné datum odeslání:
        4 pracovních dnů
        Konfigurovat
      • SG-ESS Drill SGESS
        • SLEVA
        • Volume Discount

        NACHI(FUJIKOSHI)

        SG-ESS Drill SGESS

        Provides high-speed, high-efficiency machining, and high precision drilling from steel and stainless steel, to aluminum.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1.01 ~ 19.56 ~ 94General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]High-speed steel38 ~ 168End Mill Shank / Straight ShankAvailableTiCNN/A
        Cena (bez DPH) od:
        9.27 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • For Broken Tap Removal EX-H-DRL
        • Volume Discount

        OSG

        For Broken Tap Removal EX-H-DRL

        Used for removing broken taps, drilling of hardened steel (58 ~ 68HRC), stellite, etc.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1210 ~ 60High Hardness Steel[◎]Carbide30 ~ 110End Mill Shank / Straight ShankN/ANon-CoatedN/A
        Cena (bez DPH) od:
        41.10 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • SG-ES Drill SGES
        • Volume Discount

        NACHI(FUJIKOSHI)

        SG-ES Drill SGES

        Performs high-speed, high-efficiency machining of steel, mold steel and aluminum. It can not be used for austenitic stainless steel.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 3224 ~ 185General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel56 ~ 255End Mill Shank / Straight ShankAvailableTiCNN/A
        Cena (bez DPH) od:
        14.61 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Powder HSS for Tool Steel Stub Type VPH-GDS
        • SLEVA
        • Volume Discount

        OSG

        Powder HSS for Tool Steel Stub Type VPH-GDS

        Exhibits High Cost Performance for 40-50 HRC Heat-Treated Steel Processing
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.5 ~ 203 ~ 66General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Titanium[◎]Powder high-speed steel38 ~ 132End Mill Shank / Straight ShankAvailableOtherN/A
        Cena (bez DPH) od:
        10.37 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • Medium Model for Stainless Steel / Soft Steels, EX-SUS-GDN
        • SLEVA

        OSG

        Medium Model for Stainless Steel / Soft Steels, EX-SUS-GDN

        [Features] A drill bit with an overall length of 41 mm to 50 mm.[Features] Can be used for stainless steel, mild steel, copper alloys, etc.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1 ~ 1.999 ~ 18General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS41 ~ 50End Mill ShankAvailableTiNN/A
        Cena (bez DPH) od:
        9.67 €
        Speciální cena
        Běžné datum odeslání:
        Skladová položka: 1 pracovní den
        Některé položky lze dodat ve stejný den
        Konfigurovat
      • High Speed Extra Long 15 D Type TDXL15D
        • Volume Discount

        OSG

        High Speed Extra Long 15 D Type TDXL15D

        Long drill bit that has achieved ultra-deep drilling up to 15D with an HSS drill bit.
        Více informací
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1.6 ~ 1230 ~ 216General Steel[◎] / Cast Iron[◎] / Aluminum[◎]Cobalt HSS70 ~ 300Straight ShankAvailableOtherN/A
        Cena (bez DPH) od:
        27.90 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Micro Drill, Type-N 301

          GUHRING

          Micro Drill, Type-N 301

          Drill for small diameter hole drilling.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.05 ~ 1.920.4 ~ 13.2General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Cobalt HSS25 ~ 30-N/A-N/A
          Cena (bez DPH) od:
          17.13 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Taper Pin Drill (Straight Shank) TPD
          • Volume Discount

          EIKOSHA

          Taper Pin Drill (Straight Shank) TPD

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          1.98 ~ 19.952 ~ 22General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS65 ~ 370Straight ShankN/A-N/A
          Cena (bez DPH) od:
          97.76 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • TiN Coated High-Speed Steel Drill, End Mill Shank / Stub
          • Volume Discount

          MISUMI

          TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2 ~ 1312 ~ 51General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS44 ~ 111End Mill ShankAvailableTiNN/A
          Cena (bez DPH) od:
          10.26 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • High-Speed Steel Drill, Straight Shank / Regular
          • Volume Discount

          MISUMI

          High-Speed Steel Drill, Straight Shank / Regular【5 až 10 kusů】

          [Features] Listing of frequently used sizes-Two-shank drills with general high-speed steel steam-oxide treatment.
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          1 ~ 1312 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel34 ~ 151Straight ShankN/A-N/A
          Cena (bez DPH) od:
          8.77 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • High-Speed Steel Drill, Tapered Shank / Regular Model
          • Volume Discount

          MISUMI

          High-Speed Steel Drill, Tapered Shank / Regular Model

          General purpose tapered shank drills that facilitate machining are available in rich lineups of 71 sizes
          Více informací
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          8.5 ~ 5075 ~ 220General Steel[○]High-speed steel156 ~ 369Taper shankN/A-N/A
          Cena (bez DPH) od:
          31.82 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • G Short Tapered Shank Drill GTS

            NACHI(FUJIKOSHI)

            G Short Tapered Shank Drill GTS

            Performs high efficiency grooving of workpiece materials such as steel, stainless steel and aluminum. High-accuracy positioning can be obtained.
            Více informací
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            7 ~ 31.545 ~ 114General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Cobalt HSS126 ~ 235-AvailableTiN-
            Cena (bez DPH) od:
            110.15 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • G Standard Tapered Shank Drill GTD

              NACHI(FUJIKOSHI)

              G Standard Tapered Shank Drill GTD

              It si a general-purpose coated drill, for machining of workpiece materials from carbon steel and stainless steel to aluminum.
              Více informací
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              8 ~ 31.573 ~ 172General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]High-speed steel154 ~ 293-AvailableTiN-
              Cena (bez DPH) od:
              105.90 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • SG-FAX Oil Hole Drill SGOH

                NACHI(FUJIKOSHI)

                SG-FAX Oil Hole Drill SGOH

                Oil-hole drill that achieves high-speed, high-efficiency machining of workpiece materials such as steel, stainless steel as well as aluminum.
                Více informací
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                10 ~ 3075 ~ 174General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]High-speed steel144 ~ 265End Mill ShankAvailableTiCNAvailable
                Cena (bez DPH) od:
                260.63 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Straight Shank Long Drill LSD

                  NACHI(FUJIKOSHI)

                  Straight Shank Long Drill LSD

                  A general purpose long drill bit used over the widest range of applications.[Features]· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  7.1 ~ 13100 ~ 200General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel200 ~ 400Straight ShankN/ANon-CoatedN/A
                  Cena (bez DPH) od:
                  56.02 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • AG Long Power Drill AGPLSD
                  • Volume Discount

                  NACHI(FUJIKOSHI)

                  AG Long Power Drill AGPLSD

                  Well suited for deep hole machining on materials ranging from green timber to die steel. Can machine deep holes up to L/D20 without stopping.
                  Více informací
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1 ~ 1337 ~ 225General Steel[○] / Quenched and tempered steel[◎] / Cast Iron[◎]Cobalt HSS--AvailableOther-
                  Cena (bez DPH) od:
                  26.91 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Tapered Shank Long Drill LTD

                    NACHI(FUJIKOSHI)

                    Tapered Shank Long Drill LTD

                    A general purpose long drill bit used over the widest range of applications.[Features]· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).[Applications]· Enables selection of a drill bit suitable for the drilling depth for machining.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    7 ~ 5025 ~ 700General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel200 ~ 1000Taper shankN/A--
                    Cena (bez DPH) od:
                    110.17 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Regular Type for General Machining EX-GDR
                    • Volume Discount

                    OSG

                    Regular Type for General Machining EX-GDR

                    [Features] With an overall length of 59 mm to 235 mm, it is a highly versatile drill that provides high-speed stepless machining up to 4 to 5 times the diameter.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    2 ~ 3224 ~ 165General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○]Cobalt HSS56 ~ 245End Mill Shank / Straight ShankAvailableTiNN/A
                    Cena (bez DPH) od:
                    12.10 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Powder HSS for High Speed Machining Regular Type VP-GDR
                    • Volume Discount

                    OSG

                    Powder HSS for High Speed Machining Regular Type VP-GDR

                    Super premium high-speed steel combined with V Coating offers high-speed machining as fast as ultra hard drills.
                    Více informací
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    1.8 ~ 3222 ~ 165General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○]Powder high-speed steel54 ~ 245End Mill Shank / Straight ShankAvailableOtherN/A
                    Cena (bez DPH) od:
                    11.08 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Leading Drill, Long Shank

                      OSG

                      Leading Drill, Long Shank

                      General purpose type point angle 90° leading drill long shank type. Ideal for chamfering deep parts.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      3 ~ 2511 ~ 60General Steel[◎] / Cast Iron[○] / Aluminum[○]High-speed steel75 ~ 250Straight ShankN/ANon-CoatedN/A
                      Cena (bez DPH) od:
                      14.23 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Straight Shank Drill, Regular Type N 651
                      • Volume Discount

                      GUHRING

                      Straight Shank Drill, Regular Type N 651

                      Versatile coated drill for general drilling applications.
                      Více informací
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.2 ~ 192.5 ~ 135General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]High-speed steel19 ~ 198Straight ShankAvailableTiNN/A
                      Cena (bez DPH) od:
                      10.19 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • Micro Drill, Type-N 660

                        GUHRING

                        Micro Drill, Type-N 660

                        Coated drill for small diameter hole drilling.
                        Více informací
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.16 ~ 1.91.1 ~ 11.8General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Cobalt HSS25 ~ 30-AvailableTiNN/A
                        Cena (bez DPH) od:
                        23.03 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Drill Bit for Pipe (Tapered Shank) PTDT

                          EIKOSHA

                          Drill Bit for Pipe (Tapered Shank) PTDT

                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          7.8 ~ 55.25 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS115 ~ 275Taper shankN/A-N/A
                          Cena (bez DPH) od:
                          106.97 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM
                          • Volume Discount

                          EIKOSHA

                          Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM

                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          3.4 ~ 2013 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel65 ~ 145Straight ShankAvailableOtherN/A
                          Cena (bez DPH) od:
                          74.70 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Electro-Plated Diamond Drill Ceramic Drill

                            OSG

                            Electro-Plated Diamond Drill Ceramic Drill

                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2.5 ~ 139 ~ 48--41 ~ 105End Mill Shank / Straight ShankN/ANon-Coated-
                            Cena (bez DPH) od:
                            45.43 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Straight Long Drill
                            • Volume Discount

                            TWININGS

                            Straight Long Drill

                            As it is made of HSS material, it has high hardness and can be used for deep hole drilling at high speed.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.45 ~ 7.0510 ~ 90-High-speed steel75 ~ 200-N/ANon-CoatedN/A
                            Cena (bez DPH) od:
                            10.77 €
                            Běžné datum odeslání:
                            8 pracovních dnů
                            Konfigurovat
                          • TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
                            • Volume Discount

                            MISUMI

                            TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

                            Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1324 ~ 101General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Powder high-speed steel56 ~ 161End Mill ShankAvailableTiAlNAvailable / N/A
                            Cena (bez DPH) od:
                            15.71 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • TiN Coated High-Speed Steel Drill for Stainless Steel Machining, Straight Shank / Stub, Regular Model
                            • Volume Discount

                            MISUMI

                            TiN Coated High-Speed Steel Drill for Stainless Steel Machining, Straight Shank / Stub, Regular Model【5 až 10 kusů】

                            [Features] -Products are designed for stainless steel machining-Excellent heat resistance due to the combination of cobalt high-speed steel and TiN coating-Special drill shape enables highly efficient drilling.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1312 ~ 87Stainless Steel[◎]Cobalt HSS44 ~ 137Straight ShankAvailableTiNN/A
                            Cena (bez DPH) od:
                            53.95 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • TiN Coated High-Speed Steel Drill, End Mill Shank / Regular
                            • Volume Discount

                            MISUMI

                            TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1324 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS56 ~ 161End Mill ShankAvailableTiNN/A
                            Cena (bez DPH) od:
                            9.96 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular
                            • Volume Discount

                            MISUMI

                            TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1 až 10 kusů】

                            [Features] -Demonstrates one of the best cutting performances for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip evacuation-X-shaped thinning provides a good bevel and reduces pressure load significantly.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1324 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS49 ~ 151Straight ShankAvailableTiNN/A
                            Cena (bez DPH) od:
                            8.17 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long
                            • Volume Discount

                            MISUMI

                            TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

                            [Features] -The best cutting performance for general steel, stainless steel, titanium, Inconel, heat resistant alloys and other difficult to cut materials-High spiral shape promotes chip flow.
                            Více informací
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1356 ~ 134General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS85 ~ 205Straight ShankAvailableTiNN/A
                            Cena (bez DPH) od:
                            17.53 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • TiN Coated High-Speed Steel Drill, Straight Shank / Regular

                              MISUMI

                              TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5 až 10 kusů】

                              Carefully selected frequently used 48 sizes are assorted at low prices
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              1 ~ 1312 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel34 ~ 151Straight ShankAvailableTiNN/A
                              Cena (bez DPH) od:
                              23.47 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • High-Speed Steel Drill, Tapered Shank / Regular
                              • Volume Discount

                              MISUMI

                              High-Speed Steel Drill, Tapered Shank / Regular

                              Only the most popular sizes have been carefully selected at affordable prices
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              13.5 ~ 30108 ~ 175General Steel[○]High-speed steel189 ~ 296Taper shankN/A-N/A
                              Cena (bez DPH) od:
                              24.37 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • TiN Coated High-Speed Steel Drill, Tapered Shank / Regular
                              • Volume Discount

                              MISUMI

                              TiN Coated High-Speed Steel Drill, Tapered Shank / Regular

                              A powerful tapered shank drill with TiN coating that has further improved the durability
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              10.5 ~ 3087 ~ 175General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]High-speed steel168 ~ 296Taper shankAvailableTiNN/A
                              Cena (bez DPH) od:
                              97.06 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • High-Speed Steel Drill, Tapered Shank / Long
                              • Volume Discount

                              MISUMI

                              High-Speed Steel Drill, Tapered Shank / Long

                              [Features] Offering commonly used sizesHigh speed steel conical shank with steam oxide treatment suitable for large diameter deep hole drilling-Can be reground. Please refer to the regrinding service page for procedures, scope of services, prices, etc.
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              8.5 ~ 28.5165 ~ 305General Steel[○]High-speed steel265 ~ 460Taper shankN/A-N/A
                              Cena (bez DPH) od:
                              90.65 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
                              • Volume Discount

                              MISUMI

                              TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub

                              · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              1 ~ 9.26 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Powder high-speed steel38 ~ 90End Mill ShankAvailableTiAlNN/A
                              Cena (bez DPH) od:
                              7.37 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
                              • Volume Discount

                              MISUMI

                              TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular

                              · A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel· MISUMI's unique thinning enables excellent center biting
                              Více informací
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              --General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Powder high-speed steel-End Mill ShankAvailableTiAlNN/A
                              Cena (bez DPH) od:
                              8.31 €
                              Běžné datum odeslání:
                              5 pracovních dnů
                              Konfigurovat
                            • AG Starting Drill AGSTD

                                NACHI(FUJIKOSHI)

                                AG Starting Drill AGSTD

                                Starting drill for positioning use. Can perform centering, chamfering, and even V grooving.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                3 ~ 209 ~ 40General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Cobalt HSS-----
                                Cena (bez DPH) od:
                                22.14 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • AG-ESS drill AGESS
                                • Volume Discount

                                NACHI(FUJIKOSHI)

                                AG-ESS drill AGESS

                                Performs high-speed, high-efficiency machining, from steel and stainless steel, to aluminum.
                                Více informací
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                1.2 ~ 17.78 ~ 87General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]High-speed steel40 ~ 153End Mill ShankAvailableOtherN/A
                                Cena (bez DPH) od:
                                14.33 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat