Phoenix Head Replaceable Type Drills
An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.
3 položek
* Informace o dnech dodání, přepravních nákladech a cenách
| Výrobce |
|---|
| Název řady |
| Cena (bez DPH) |
|---|
| Normální datum odeslání |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
311.33 € | 399.75 € | 349.46 € |
| 8 pracovních dnů | 8 pracovních dnů | 6 pracovních dnů |
| 14.0～14.4 | 14.0～14.4 | 14.0～14.4 |
| 42 | 70 | 42 |
| General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] |
| - | - | - |
| 109.2 | 138.1 | 110.1 |
| End Mill Shank | End Mill Shank | End Mill Shank |
| N/A | N/A | N/A |
| - | - | - |
| Available | N/A | N/A |
