Phoenix Head Replaceable Type Drills

An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.

3 položek

* Informace o dnech dodání, přepravních nákladech a cenách

Seznam

Fotografie

Porovnat specifikace

Počet položek k zobrazení:Seřadit podle:

Datum odeslání:

ISCAR

Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm

Machining Diameter: 7.5 mm to 25.9 mm

Více informací

Hole diameter (drill diameter) D(mm)	Groove Length L(mm)	work material	Tool Material Type	Overall Length L(mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
24.0～24.9	72	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○]	-	159.6	End Mill Shank	N/A	-	Available

Běžná cena (bez DPH):

485.74 €

Běžné datum odeslání:

8 pracovních dnů

Konfigurovat

ISCAR

SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm

The cutting force increases the clamping force of the head, which enables stable machining, and is a part for free-cutting steelOCHAM that achieves good internal lubrication through the coolant hole at the tip of the holder.

Více informací