Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Drill Bits (With/without Oil Hole: Available)
Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
92 položek
* Informace o dnech dodání, přepravních nákladech a cenách
- Volume Discount
OSG
Solid Carbide Drill 10D Type with Oil Hole ADO-10D
[Features]· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holesVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 40 ～ 155 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] Carbide 90 ～ 215 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:115.82 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole SpecificationsVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3.3 ～ 12 32 ～ 96 Quenched and tempered steel[◎] / High Hardness Steel[◎] Carbide 78 ～ 156 End Mill Shank / Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:159.00 €Běžné datum odeslání:6 pracovních dnů
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.5 ～ 8 155 ～ 440 - Carbide 185 ～ 485 - Available Other Available KonfigurovatCena (bez DPH) od:321.34 €Běžné datum odeslání:24 pracovních dnů
- Volume Discount
OSG
Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil holeVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 20 18 ～ 140 General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] Carbide 70 ～ 205 End Mill Shank / Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:85.18 €Běžné datum odeslání:6 pracovních dnů
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.5 ～ 12 85 ～ 360 - Carbide 115 ～ 420 - Available Other Available KonfigurovatCena (bez DPH) od:258.34 €Běžné datum odeslání:24 pracovních dnů
- Volume Discount
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-3D
[Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chipsVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 20 12 ～ 100 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 66 ～ 165 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:65.10 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Solid Carbide Drill 5D Type with Oil Hole ADO-5D
[Features]· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chipsVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 20 18 ～ 160 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 70 ～ 225 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:85.18 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Solid Carbide Drill 15D Type With Oil Hole ADO-15D
[Features]· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holesVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 55 ～ 215 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] Carbide 105 ～ 280 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:129.55 €Běžné datum odeslání:6 pracovních dnů
OSG
Solid Carbide Drill 30D Type With Oil Hole ADO-30D
[Features]· Carbide 30D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holesVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3.5 ～ 10 116 ～ 330 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] Carbide 185 ～ 390 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:156.60 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
[Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Carbide 66 ～ 124 End Mill Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:79.21 €Běžné datum odeslání:5 pracovních dnů
OSG
Carbide Stub Type for High Hardness Steel FH-GDS
Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.3 ～ 2 1.6 ～ 12 Quenched and tempered steel[○] / High Hardness Steel[◎] Carbide 38 ～ 46 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:52.37 €Běžné datum odeslání:6 pracovních dnů
GUHRING
End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525
The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 50 ～ 258 - Carbide 90 ～ 310 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:195.81 €Běžné datum odeslání:8 pracovních dnů
GUHRING
[Features]· Also suitable for hole drilling up to 1.5D and drilling deep pilot holes.· Internal oil supply type.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] - 84 ～ 194 - N/A - Available KonfigurovatCena (bez DPH) od:316.67 €Běžné datum odeslání:8 pracovních dnů
GUHRING
The tube is a solid carbide type integrated with the head, which increases torsional strength and suppresses vibration during machining. The screwdriver diameter is metric to support oil hole holders for machining centers.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1.2 ～ 3.2 45 - Carbide 90 ～ 100 - N/A - Available KonfigurovatCena (bez DPH) od:306.08 €Běžné datum odeslání:8 pracovních dnů
GUHRING
[Features]· The tube is a solid carbide type integrated with the head, which increases torsional strength and suppresses vibration during machining.· The screwdriver diameter is unified to φ16 to support oil hole holders for machining centers.· Internal oil supply type.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1.2 ～ 4 80 - Carbide 143 - N/A - Available KonfigurovatCena (bez DPH) od:429.46 €Běžné datum odeslání:24 pracovních dnů
GUHRING
Micro Drill, 8 X D, Type-N 6408
Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machiningVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1.4 ～ 3 15 ～ 33 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] Carbide 52 ～ 66 - Available Other Available KonfigurovatCena (bez DPH) od:152.28 €Běžné datum odeslání:6 pracovních dnů
GUHRING
Brazed carbide head type with a tube that uses highly springy hardened steel pipe. The screwdriver diameter is metric to support oil hole holders for machining centers.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 4.95 ～ 11.95 432 ～ 1030 - Carbide 480 ～ 1080 - Available TiN Available KonfigurovatCena (bez DPH) od:166.50 €Běžné datum odeslání:8 pracovních dnů
GUHRING
Drill for Difficult-to-Cut Materials 3 x D RT100HF 8520
5,500 HV high hardness coating and tough blade shape achieve long life and high precision hole drilling for titanium and nickel based alloys.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 20 ～ 79 - Carbide 62 ～ 131 - Available Other Available KonfigurovatCena (bez DPH) od:107.94 €Běžné datum odeslání:8 pracovních dnů
NACHI(FUJIKOSHI)
G Long Tapered Shank Oil Hole Drill GLTDOH
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 50 300 ～ 600 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Cobalt HSS 450 ～ 800 Taper shank Available TiN Available KonfigurovatCena (bez DPH) od:1,041.51 €Běžné datum odeslání:6 pracovních dnů
OSG
Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT
[Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3.03 ～ 12.03 15 ～ 60 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] Carbide 65 ～ 120 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:98.10 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil holeVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.8 ～ 20 17 ～ 100 General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] Carbide 66 ～ 165 End Mill Shank / Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:65.10 €Běžné datum odeslání:6 pracovních dnů
WIDIA
VariDrill Solid Carbide Drill 8xD VDS403A
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 56 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 94 End Mill Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:183.16 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
[Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 71 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 66 ～ 124 End Mill Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:71.64 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
[Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole toleranceVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 4.2 ～ 7 24 ～ 53 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 66 ～ 91 End Mill Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:107.05 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Long Drill, Straight Shank
Carbide long drill that achieves the high efficiency deep-hole drillingVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 10 60 ～ 140 General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 100 ～ 200 Straight Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:133.32 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steelVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 6.5 ～ 11.5 63 ～ 94 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Powder high-speed steel 107 ～ 151 End Mill Shank Available TiAlN Available KonfigurovatCena (bez DPH) od:131.76 €Běžné datum odeslání:5 pracovních dnů
NACHI(FUJIKOSHI)
Aqua Drill EX Oil Hole 5D AQDEXOH5D
Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.5 ～ 8.7 20 ～ 72 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○] Carbide 68 ～ 127 End Mill Shank / Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:116.24 €Běžné datum odeslání:6 pracovních dnů
NACHI(FUJIKOSHI)
Oil-hole drill that achieves high-speed, high-efficiency machining of workpiece materials such as steel, stainless steel as well as aluminum.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 10 ～ 30 75 ～ 174 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○] High-speed steel 144 ～ 265 End Mill Shank Available TiCN Available KonfigurovatCena (bez DPH) od:241.51 €Běžné datum odeslání:6 pracovních dnů
NACHI(FUJIKOSHI)
General-purpose coating oil hole drill. Side-lock shank has been adopted.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 8 ～ 40 33 ～ 152 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Cobalt HSS 83 ～ 250 End Mill Shank / Straight Shank Available TiN Available KonfigurovatCena (bez DPH) od:270.06 €Běžné datum odeslání:6 pracovních dnů
NACHI(FUJIKOSHI)
Aqua Drill EX Oil Hole 3D AQDEXOH3D
Stable wet machining, can be MQL machining. For high efficiency drilling up to 3 times the drill diameter.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 7 35 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] Carbide 88 Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:133.03 €Běžné datum odeslání:6 pracovních dnů
NACHI(FUJIKOSHI)
Aqua Drill EX Oil Hole 8D AQDEXOH8D
Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5.6 66 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] Carbide 118 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:167.41 €Běžné datum odeslání:6 pracovních dnů
OSG
Extra Long Type Carbide with Oil Hole for High Hardness Mold Materials FTO-H-GDXL
Achieves a stable and long tool life and high efficiency in 20D ultra-deep hole machining of high hardness mold material (45 ~ 55HRC)Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 6 ～ 10 140 ～ 230 High Hardness Steel[◎] Carbide 190 ～ 280 Straight Shank Available Other Available KonfigurovatCena (bez DPH) od:227.50 €Běžné datum odeslání:6 pracovních dnů
OSG
Extra Long Type Carbide with Oil Hole for Copper / Aluminium CAO-GDXL
Non-step machining of ultra-deep 15D - 30D holes. Achieves a Machining Efficiency and Tool Life Several Times that of Gun Drills and HSS DrillsVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 10 55 ～ 265 Aluminum[◎] / Copper[○] Carbide 105 ～ 315 End Mill Shank / Straight Shank N/A Non-Coated Available KonfigurovatCena (bez DPH) od:292.50 €Běžné datum odeslání:6 pracovních dnů
OSG
For General Machining with Oil Hole Regular Type EX-HO-GDR
Lubrication Hole Enables High Efficiency Machining / Longevity and is Effective Against Hard to Grind Materials Such as Stainless SteelVíce informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 6 ～ 40 57 ～ 180 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Cobalt HSS 101 ～ 270 End Mill Shank / Straight Shank Available TiN Available KonfigurovatCena (bez DPH) od:73.18 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
DIJET
It is a tool with excellent abrasion resistance.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 11.1 ～ 15.9 58 ～ 80 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] Carbide 122 ～ 146 End Mill Shank Available TiCN Available KonfigurovatCena (bez DPH) od:245.97 €Běžné datum odeslání:8 pracovních dnů
DIJET
It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows smooth chip flow and easy resharpening.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 11.1 ～ 15.9 92 ～ 128 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] Carbide 158 ～ 194 End Mill Shank Available TiCN Available KonfigurovatCena (bez DPH) od:281.35 €Běžné datum odeslání:8 pracovních dnů
DIJET
It is a tool with excellent abrasion resistance.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 20 ～ 50 General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] - 70 ～ 135 End Mill Shank / Straight Shank Available TiCN Available KonfigurovatCena (bez DPH) od:221.19 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
OMIKOGYO
Carbide Twisted V Drill, Long Size for Models H7-H8
For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 10 115 Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 165 End Mill Shank N/A - Available KonfigurovatCena (bez DPH) od:320.66 €Běžné datum odeslání:10 pracovních dnů
GUHRING
MQL Long Drill 15 x D with Oil Hole RT100T 6509
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 14 55 ～ 248 - Carbide 95 ～ 297 - Available TiAlN Available KonfigurovatCena (bez DPH) od:243.48 €Běžné datum odeslání:8 pracovních dnů
GUHRING
MQL Long Drill 20 x D with Oil Hole RT100T 6511
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 14 70 ～ 318 - Carbide 110 ～ 367 - Available TiAlN Available KonfigurovatCena (bez DPH) od:277.08 €Běžné datum odeslání:8 pracovních dnů
GUHRING
MQL Long Drill 25 x D with Oil Hole RT100T 6512
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 85 ～ 337 - Carbide 125 ～ 386 - Available TiAlN Available KonfigurovatCena (bez DPH) od:303.98 €Běžné datum odeslání:8 pracovních dnů
GUHRING
MQL Long Drill 30 x D with Oil Hole RT100T 6513
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 10 100 ～ 327 - Carbide 140 ～ 371 - Available TiAlN Available KonfigurovatCena (bez DPH) od:344.29 €Běžné datum odeslání:8 pracovních dnů
GUHRING
MQL Long Drill 40 x D with Oil Hole RT100T 6514
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 8 130 ～ 343 - Carbide 170 ～ 383 - Available TiAlN Available KonfigurovatCena (bez DPH) od:414.08 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
GUHRING
End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
[Features]· Internal lubrication enables high performance drilling without steps.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 20 ～ 79 General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] Carbide 62 ～ 131 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:117.85 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
GUHRING
End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
[Features]· Internal lubrication enables high performance drilling without steps.Více informacíHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 28 ～ 101 General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] Carbide 66 ～ 153 End Mill Shank Available Other Available KonfigurovatCena (bez DPH) od:111.73 €Běžné datum odeslání:6 pracovních dnů
