Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Chamfer threads (Lcf)
  • Tool Material Type
  • work material
  • Screw-Hole-Related Tools (Tap Type: Hand Tap)

    Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
    • Hand Tap Set (for Metric Thread Screw)
      • SLEVA
      • Volume Discount

      ISHIHASHI

      Hand Tap Set (for Metric Thread Screw)

      [Features]· A tungsten hand tap set.· Can be used for both through holes and blind holes.· Economical compared to HSS.[Applications]· Work materials: Iron, light metal.[Material]· Alloy tool steel (SKS2)
      Více informací
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      MeterM4 ~ M80.75 ~ 1.25---Hand Tap--
      Cena (bez DPH) od:
      17.82 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT
      • Volume Discount

      OSG

      Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

      Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface
      Více informací
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      MeterM3 ~ M120.5 ~ 1.752.5P ~ 5PPowder high-speed steelQuenched and tempered steel (45 to 55 HRC)[◎]Hand TapFor through hole / For blind holeAvailable
      Cena (bez DPH) od:
      26.47 €
      Běžné datum odeslání:
      8 pracovních dnů
      Konfigurovat
    • High-Speed Steel Hand Tap
      • Volume Discount

      MISUMI

      High-Speed Steel Hand Tap【10 kusů】

      [Features] A general purpose hand tap made from uncoated high speed steelHigh versatility, suitable for a wide range of applications and materials such as aluminium and general steel.
      Více informací
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      MeterM3 ~ M100.5 ~ 1.51.5 P ~ 9 PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Hand TapFor through hole / For blind holeN/A
      Cena (bez DPH) od:
      33.25 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide Hand Tap
      • Volume Discount

      MISUMI

      Carbide Hand Tap

      [Features] -Hand taps made from uncoated carbide-Can be used for both blind holes and through holes-Suitable for mass production of taps for various cast irons.
      Více informací
      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
      MeterM3 ~ M100.5 ~ 1.51.5 P ~ 3 PCarbideSteel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]Hand TapFor through hole / For blind holeN/A
      Cena (bez DPH) od:
      33.14 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

        OSG

        Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

        Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.
        Více informací
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        MeterM3 ~ M200.5 ~ 2.51.5P ~ 3PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Hand TapFor through hole / For blind holeN/A
        Cena (bez DPH) od:
        88.83 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

          OSG

          Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

          Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM2 ~ M200.4 ~ 2.53PCarbideHigh Hardness Steel (50-60 HRC)[◎]Hand TapFor through hole / For blind holeAvailable
          Cena (bez DPH) od:
          83.15 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Hand Tap Series, for General, HT
          • SLEVA
          • Volume Discount

          OSG

          Hand Tap Series, for General, HT

          High speed steel hand tap.Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          Meter / Unified / Whitworth / Sewing MachineW1"1/4 ~ M350.75 ~ 401.5P ~ 9PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeN/A
          Cena (bez DPH) od:
          8.29 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Hand Tap Series, for Difficult-to-Machine Material, CPM-HT
          • SLEVA
          • Volume Discount

          OSG

          Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

          Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM3 ~ M480.5 ~ 52P ~ 5PPowder high-speed steelHigh Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Hand TapFor through hole / For blind holeN/A
          Cena (bez DPH) od:
          11.08 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Hand tap, Finish tap
          • Volume Discount

          RUKO

          Hand tap, Finish tap

          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM2--High-speed steel-Hand Tap--
          Cena (bez DPH) od:
          5.32 €
          Běžné datum odeslání:
          3 pracovních dnů
          Konfigurovat
        • Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT
          • Volume Discount

          OSG

          Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

          Suitable for threading hardened steel up to 55 HRC.Material: High hardness steel up to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM3 ~ M120.5 ~ 1.752.5P ~ 5PCarbideQuenched and tempered steel (45 to 55 HRC)[◎]Hand TapFor through hole / For blind holeAvailable
          Cena (bez DPH) od:
          83.34 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Insert Screw Tap Series, Hand Tap HL-HT
          • Volume Discount

          OSG

          Insert Screw Tap Series, Hand Tap HL-HT

          Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          UnifiedNo8UN325PHigh-speed steelAluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎]Hand TapFor through hole / For blind holeN/A
          Cena (bez DPH) od:
          12.11 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Hand Tap Series, Tin Coated, TIN-HT
          • Volume Discount

          OSG

          Hand Tap Series, Tin Coated, TIN-HT

          Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          MeterM2 ~ M240.4 ~ 31.5P ~ 5PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeAvailable
          Cena (bez DPH) od:
          16.26 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • Point Tap Series, General Long Shank, EX-LT
          • SLEVA
          • Volume Discount

          OSG

          Point Tap Series, General Long Shank, EX-LT

          Long shank type.Tool material: vanadium high-speed steelWorking material: general steel / cast iron / aluminium / copper.
          Více informací
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          Meter / Unified3/8UN ~ M121.25 ~ 161.5P ~ 5PVanadium High-Speed SteelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeN/A
          Cena (bez DPH) od:
          29.36 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT

            OSG

            Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT

            Suitable for massive tapping of aluminum alloy castings by high precision automatic machine
            Více informací
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM3 ~ M120.5 ~ 1.751.5PVanadium High-Speed SteelCast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Hand TapFor through hole / For blind holeN/A
            Cena (bez DPH) od:
            66.96 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Hand Tap Series, Super Hard Hand Tap, OTT

              OSG

              Hand Tap Series, Super Hard Hand Tap, OTT

              Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.
              Více informací
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              MeterM1.4 ~ M200.3 ~ 2.51.5P ~ 3PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Hand TapFor through hole / For blind holeN/A
              Cena (bez DPH) od:
              60.78 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Hand Tap Set (for metric screws / HSS-E)
              • Volume Discount

              TRUSCO NAKAYAMA

              Hand Tap Set (for metric screws / HSS-E)

              [Characteristics] Can be used for both through holes and blind holes. High-speed steel (HSS-E) tap set. Work materials: general steel, low to medium carbon steel, alloy steel.
              Více informací
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              MeterM5 ~ M80.8 ~ 1.25-High-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]Hand TapFor through hole / For blind holeN/A
              Cena (bez DPH) od:
              32.45 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Hand Tap (for metric screws / SKS)
              • SLEVA
              • Volume Discount

              TRUSCO NAKAYAMA

              Hand Tap (for metric screws / SKS)

              [Characteristics] For creating and brushing up (making clean) screw holes. For coarse screw thread repair and machining. [Application] Work Material: Iron, Light Metal. Coarse screw thread repairing and machining.
              Více informací
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              MeterM2 ~ M30.4 ~ 0.51.5P ~ 9PAlloy HSSLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]Hand Tap-N/A
              Cena (bez DPH) od:
              3.56 €
              Speciální cena
              Běžné datum odeslání:
              Skladová položka: 1 pracovní den
              Některé položky lze dodat ve stejný den
              Konfigurovat
            • Hand Tap HT (Cutting Tap)
              • Volume Discount
              • Stock

              YAMAWA MFG

              Hand Tap HT (Cutting Tap)

              Hand tap used for general tapping work.[Features]・ High blade tip strength makes it easy for regrinding.・ More suitable for manual work compared to taps of other shapes.・ 2 types are available, with 5P or 1.5P chamfered threads.・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.・ Machining with mechanical machinery is also possible.・ Has straight grooves out of consideration for cutting chip stow.・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.[Applications]・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.
              Více informací
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              UnifiedNo.10-24UNC-5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeN/A
              Cena (bez DPH) od:
              18.10 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Hand Tap for Left-Hand Threads HT(LH)
              • Volume Discount

              YAMAWA MFG

              Hand Tap for Left-Hand Threads HT(LH)

              It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
              Více informací
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              MeterM2.5 ~ M80.45 ~ 0.755PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Hand TapFor through hole / For blind holeN/A
              Cena (bez DPH) od:
              24.93 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Carbide Hand Tap for Cast Iron N-CT FC

                YAMAWA MFG

                Carbide Hand Tap for Cast Iron N-CT FC

                A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
                Více informací
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                MeterM3 ~ M50.5 ~ 0.81.5PCarbideQuenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]Hand TapFor through hole / For blind holeN/A
                Cena (bez DPH) od:
                109.48 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Hexagonal Shank Tapping Drill

                  RUKO

                  Hexagonal Shank Tapping Drill

                  [Features]· Hexagonal shaft shank design enables mounting to cordless screwdriver.· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.[Applications]· For drilling and creating/repairing screw threads.· Work materials: Iron, aluminum, copper.
                  Více informací
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  MeterM61-High-speed steelCast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Hand TapFor through hole / For blind holeN/A
                  Cena (bez DPH) od:
                  27.37 €
                  Běžné datum odeslání:
                  10 pracovních dnů
                  Konfigurovat
                • Hand Tap (For Metric Screws / SKS)
                  • SLEVA

                  TRUSCO NAKAYAMA

                  Hand Tap (For Metric Screws / SKS)

                  [Features]· For creating and refining (making clean) screw holes. · For creating and modifying coarse screw threads. [Applications]· Work materials: iron, light metals. · For creating and modifying coarse screw threads. [Materials]· Low alloy steel (SKS)
                  Více informací
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  MeterM221.5-JIS-SKS-Hand Tap-N/A
                  Cena (bez DPH) od:
                  75.96 €
                  Speciální cena
                  Běžné datum odeslání:
                  Skladová položka: 1 pracovní den
                  K dispozici odeslání ve stejný den
                  Konfigurovat
                • Tap Set

                    ENGINEER

                    Tap Set

                    3-piece set of starter tap, medium tap, and finishing tap.
                    Více informací
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    -M1.4 ~ M6.00.3---Hand Tap--
                    Cena (bez DPH) od:
                    18.24 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat