Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Screw-Hole-Related Tools (Tap Type: Thread cutter)
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
15 položek
* Informace o dnech dodání, přepravních nákladech a cenách
GUHRING
Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133
[Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 ～ M20 1 ～ 2.5 - Carbide - Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:189.20 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
NS TOOL
Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when brokenVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Other S0.1 ～ S1.4 0.025 ～ 0.3 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Thread cutter - Available KonfigurovatCena (bez DPH) od:96.41 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
Threading cutters that enable the high-speed stable processing are available at special pricesVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M20 0.5 ～ 2.5 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:108.15 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
[Features] -Carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 - Carbide Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:110.98 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M12 0.4 ～ 1.75 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:213.66 €Běžné datum odeslání:7 pracovních dnů
- Volume Discount
MISUMI
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
[Features] -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible-Reduced cutting load due to short flute length (3 webs)-Enables effective thread cutting right into the corners of blind holes.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1.4 ～ M20 0.3 ～ 2.5 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:174.76 €Běžné datum odeslání:7 pracovních dnů
- Volume Discount
MISUMI
TS Coated Carbide Threading Cutter, for Internal Metric Threads
[Features] --Tungsten carbide thread cutter for stable high speed machining-Can be used for both blind holes and through holes--It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:174.81 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
OSG
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole MarginVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified - 0.25 ～ 32 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:101.50 €Běžné datum odeslání:6 pracovních dnů
OSG
Planet Cutter Series MC-Planet Cutters PNGT
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Taper for Pipe / Parallel for Pipes - 1 ～ 19 - Cobalt HSS Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:205.83 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Planet Cutter Series NC-Planet Cutters WX-PNC
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified / Taper for Pipe - 1 ～ 28 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:158.30 €Běžné datum odeslání:6 pracovních dnů
OSG
Planet Cutter Series Super Planet DR-PNAC
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 ～ M12 1 ～ 1.75 - Carbide Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:295.75 €Běžné datum odeslání:6 pracovních dnů
OSG
Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 ～ M12 1 ～ 1.75 - Carbide Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] Thread cutter For blind hole Available KonfigurovatCena (bez DPH) od:324.46 €Běžné datum odeslání:6 pracovních dnů
OSG
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter - 0.5 ～ 3 - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:165.90 €Běžné datum odeslání:6 pracovních dnů
GUHRING
Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737
[Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M6 ～ M20 1 ～ 2.5 - Carbide - Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:244.94 €Běžné datum odeslání:8 pracovních dnů
NS TOOL
Thread Cutting Tool (for Unified Threads) MMTU
[Features]・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.・ Adopts MUGEN Coating Premium for the realization of a long life.・ For Unified Standard threadsVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Unified NO.0-80UNF ～ 1/4-20UNC - - Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] Thread cutter For blind hole Available KonfigurovatCena (bez DPH) od:104.05 €Běžné datum odeslání:6 pracovních dnů
![Rigid Shape Coupling - Set Screw Type - [SRG]](https://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005200798_SRG.jpg)