Překládáme náš obchod do češtiny!  
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

Stock
Zobrazit pouze skladové položky

Screw Types

Meter

Screw size (Nominal)

Pitch (P), Number of Threading(mm)

0.5
0.75
1
1.25
1.5
2

Chamfer threads (Lcf)

1.5P
2P
2.5 P
2.5P
3P
4P
5 P
5P
5.5P
6P

Tool Material Type

High-speed steel
Cobalt HSS
Powder high-speed steel
Carbide
Alloy HSS
Vanadium High-Speed Steel

work material

Low-Carbon Steel (carbon alloy less than 0.25%)
Medium carbon steel (carbon content 0.25 to 0.45%)
High Carbon Steel (C with a content over 0.45%)
Alloy Steel (SCM)
Stainless Steel (JIS-SUS)
Quenched and tempered steel (25 to 35 HRC)
Quenched and tempered steel (35 to 45 HRC)
High Hardness Steel (50-60 HRC)
Tool Steel (Before SKD Hardening)
Steel casting (SC)
Cast Iron (FC)
Ductile Cast Iron (FCD)
Copper (Cu)
Brass (Bs)
Brass cast iron (BsC)
Bronze (Pb)
Aluminum Rolled Material (AL)
Aluminum Alloy Casting (AC, ADC)
Magnesium Alloy (MC)
Zinc Alloy Casting (ZDC)
Titanium Alloy (Ti-6Al-4V, etc)
Nickel-based alloy (Inconel, etc.)
Thermosetting plastic (bakelite, phenol, etc.)
Thermoplastic plastic (vinyl chloride, nylon, etc.)

Tap Type

Spiral Tap
Point tap
Roll tap
Hand Tap
Thread cutter
Die
Modification/removal Tool

Hole type

For through hole
For blind hole

Coating Y/N

Available
N/A

Coating Type

TiCN
TiN
Non-Coated
Other

Overall Length (L)(mm)

83
88
90
91.28
95
100
110
120
150
180
200

Výrobce

Screw-Hole-Related Tools (Screw size (Nominal): M14)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

55 položek

* Informace o dnech dodání, přepravních nákladech a cenách

Seznam

Fotografie

Porovnat specifikace

Počet položek k zobrazení:Seřadit podle:

Datum odeslání:

Další

SLEVA
Volume Discount

OSG

A Tap Series, Spiral Tap, A-SFT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Více informací

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M14	1 ～ 2	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

Cena (bez DPH) od:

45.10 €

Speciální cena

Běžné datum odeslání:

6 pracovních dnů

Screw-Hole-Related Tools (Screw size (Nominal): M14)

Kategorie související s Screw-Hole-Related Tools