Překládáme náš obchod do češtiny!  
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

Screw Types
- Unified
Screw size (Nominal)
- 5/8-18UNF
Chamfer threads (Lcf)
- 2.5P
- 5P
Tool Material Type
- Powder high-speed steel
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
Tap Type
- Spiral Tap
- Point tap
Hole type
- For through hole
- For blind hole
Coating Y/N
- Available
Coating Type
- Other
Overall Length (L)(mm)
- 95
Výrobce
- OSG (2)

Screw-Hole-Related Tools (Screw size (Nominal): 5/8-18UNF)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

2 položek

* Informace o dnech dodání, přepravních nákladech a cenách

Seznam

Fotografie

Porovnat specifikace

Počet položek k zobrazení:Seřadit podle:

Datum odeslání:

SLEVA
Volume Discount

OSG

A Tap Series, Spiral Tap, A-SFT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Více informací

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Unified	5/8-18UNF	-	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

Cena (bez DPH) od:

61.77 €

Speciální cena

Běžné datum odeslání:

6 pracovních dnů

Konfigurovat

Volume Discount

OSG

A Tap Series for Pipes Point Tap A-POT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.