Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Screw-Hole-Related Tools (Coating Type: TiN)
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
33 položek
* Informace o dnech dodání, přepravních nákladech a cenách
MISUMI
TiN Coated High-Speed Steel Roll Tap【5 kusů】
[Features] -Used for tapping that produces no chips-Suitable for a wide range of materials, from general steel to non-ferrous alloys-Excellent abrasion resistance and chip weld resistance due to TiN coating.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 2 P ～ 4 P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] Roll tap For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:53.99 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
YAMAWA MFG
Titanium coating point tab PO-V (N-PO-V)
Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:28.74 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Hand Tap Series, Tin Coated, TIN-HT
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M24 0.4 ～ 3 1.5P ～ 5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Hand Tap For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:16.26 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:39.15 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M14 0.5 ～ 2 5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:21.73 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
OSG
Groove-Free Tap Series, Tin Coated, TIN-NRT
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Unified No0UN ～ M20 0.25 ～ 80 2P ～ 4P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:17.52 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
YAMAWA MFG
Titanium Coating Roll Tap R+V / R-V
A coating roll tap suitable for threading steel and nonferrous materials.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M6 0.5 ～ 1 2P ～ 4P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Roll tap For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:27.26 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
MISUMI
TiN Coated High-Speed Steel Spiral Tap【1 až 5 kusů】
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also availableVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 1.5 P ～ 2.5 P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:14.23 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
TiN Coated High-Speed Steel Point Tap【1 až 5 kusů】
[Features] -Can be used for through hole machining-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.-Excellent abrasion resistance and resistance to chip welding due to TiN coating-Long shank, ideal for drilling deep tapped holes (G-LS-POT).Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 5 P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:13.46 €Běžné datum odeslání:5 pracovních dnů
NACHI(FUJIKOSHI)
G Spiral Tap for Deep Holes in Stainless Steel GSPS
Suited for stainless steel and materials that produce a lot of swarf.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M16 1.25 ～ 2 2.5P Alloy HSS Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:33.01 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M6 0.4 ～ 1 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:17.56 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, TIN-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1.4 ～ M16 0.3 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:16.04 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M16 0.5 ～ 2 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:23.77 €Běžné datum odeslání:6 pracovních dnů
OSG
Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT
Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M10 0.5 ～ 1.5 3P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:32.98 €Běžné datum odeslání:6 pracovních dnů
OSG
Planet Cutter Series MC-Planet Cutters PNGT
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter / Taper for Pipe / Parallel for Pipes - 1 ～ 19 - Cobalt HSS Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Thread cutter For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:205.83 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Point Tap Series, Tin Coated, TIN-POT
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steelVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M1.4 ～ M42 0.3 ～ 4.5 5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:15.45 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steelVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M24 0.5 ～ 3 5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:22.83 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M14 0.5 ～ 2 6P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:30.20 €Běžné datum odeslání:6 pracovních dnů
OSG
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M30 0.5 ～ 3.5 6P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] Point tap For through hole Available KonfigurovatCena (bez DPH) od:27.13 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coated TIN-TPT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:30.48 €Běžné datum odeslání:6 pracovních dnů
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Carbide Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:41.25 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
TIN coating with excellent solvent resistance, abrasion resistance has been applied.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe R1 ～ R3/8 11 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:31.88 €Běžné datum odeslání:6 pracovních dnů
OSG
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M12 0.5 ～ 1.75 2P ～ 4P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] Roll tap For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:24.43 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OSG
Groove-Free Tap Series For Non-Ferrous Alloy B-NRT
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M20 1.25 ～ 1.5 4P High-speed steel Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] Roll tap For blind hole Available KonfigurovatCena (bez DPH) od:16.42 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
GUHRING
[Features]· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 ～ M6 0.5 ～ 1 - High-speed steel - Roll tap - Available KonfigurovatCena (bez DPH) od:31.25 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
YAMAWA MFG
Titanium Coated Through Hole Spiral Tap AU+SL
Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous MachiningVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M3 0.5 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For through hole Available KonfigurovatCena (bez DPH) od:21.97 €Běžné datum odeslání:10 pracovních dnů
YAMAWA MFG
Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M2 ～ M12 0.4 ～ 1.75 2.5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:21.93 €Běžné datum odeslání:6 pracovních dnů
YAMAWA MFG
Spiral Tap for Through Holes for High Speed F-SL
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to OccurVíce informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M10 1.25 ～ 1.5 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Spiral Tap For through hole Available KonfigurovatCena (bez DPH) od:51.40 €Běžné datum odeslání:6 pracovních dnůOSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:64.89 €Běžné datum odeslání:6 pracovních dnůOSG
Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:53.57 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
OSG
Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc1/2 ～ Rc3/8 14 ～ 28 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurovatCena (bez DPH) od:47.40 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
SANDVIK
Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)
[Features]· A high-productivity tap tool.· Long tool life and excellent chip processing provide high stability.· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.· Taps are available for each work material, making selection easy.[Applications]· For blind hole machining.· Work materials: Steel.[Material]· High-Speed Steel (HSS-E)Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 ～ M10 0.7 ～ 1.5 2.5P - - Spiral Tap For blind hole Available KonfigurovatCena (bez DPH) od:46.20 €Běžné datum odeslání:6 pracovních dnů
SANDVIK
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
[Features]· A high-productivity tap tool.· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.· There are different taps for different work materials, making selecting a tap simple[Applications]· For machining through holes.· Work material: steel, cast iron, aluminum alloy.Více informacíScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M8 ～ M12 1 - - - Point tap - Available KonfigurovatCena (bez DPH) od:76.42 €Běžné datum odeslání:6 pracovních dnů