Spiral Taps (Screw Types: Meter)

• 

  • SLEVA
  • Volume Discount

  OSG

  A Tap Series, Spiral Tap, A-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M56	0.25 ～ 5.5	1.5P ～ 2.5P	Powder high-speed steel / Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  16.04 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • SLEVA
  • Volume Discount
  • Stock

  OSG

  Spiral Tap Series, General Purpose EX-SFT

  Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1 ～ M56	0.25 ～ 5.5	2.5P ～ 3P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  7.97 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  17.56 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless EX-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M42	0.4 ～ 4.5	2.5P ～ 3P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  8.81 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

  Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M36	0.4 ～ 4	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  14.47 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  WERA

  Tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  7.75 €

  Běžné datum odeslání:

  4 pracovních dnů

  Konfigurovat
• 

  SANDVIK

  SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.6 ～ M48	-	-	-	-	-	-	-

  Cena (bez DPH) od:

  17.98 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  TiN Coated High-Speed Steel Spiral Tap【1 až 5 kusů】

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	1.5 P ～ 2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  14.23 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap for Aluminium, HS-AL-SFT

  Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M6	0.4 ～ 1	3P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  13.15 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  OSG

  Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

  Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1 ～ M30	0.25 ～ 3.5	1.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  8.69 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

  Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	3P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  32.98 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  Spiral Tap Series, Carbide Spiral Tap OT-SFT

  Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M12	0.5 ～ 1.75	1.5P ～ 2.5P	Carbide	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  72.40 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YAMAWA MFG

  Coating Spiral Tap AU+ SP

  Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  21.93 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YAMAWA MFG

  Spiral Tap For High Carbon Steel HC+SP / HC-SP

  It is suitable for tapping high carbon steel such as S55C.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M5	0.5 ～ 0.8	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  12.06 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.25 ～ 3	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  24.50 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  Carbide Spiral Tap

  [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	1.5 P ～ 2.5 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  33.14 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 kusů】

  [Features] -Multi-use tap for all materials from general steel, heat treated steel to stainless steel-Efficient chip removal due to short thread form and special flute shape.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5 P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  50.83 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Spiral Tap【10 kusů】

  [Features] -High speed uncoated steel tap with spiral flutes-Suitable for machining blind holes-Effective for materials with continuous chips such as carbon steel and steel alloys.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  71.27 €

  Běžné datum odeslání:

  5 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Spiral Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M24	0.4 ～ 3	2.5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  7.62 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  NACHI(FUJIKOSHI)

  G Spiral Tap for Deep Holes in Stainless Steel GSPS

  Suited for stainless steel and materials that produce a lot of swarf.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M16	1.25 ～ 2	2.5P	Alloy HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  33.01 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

  Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M8	0.7 ～ 1.25	2.5P	Powder high-speed steel	Nickel-based alloy (Inconel, etc.)[◎]	Spiral Tap	For through hole	Available

  Cena (bez DPH) od:

  22.41 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, TIN-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M16	0.3 ～ 2	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  16.04 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M16	0.5 ～ 2	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  23.77 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  OSG

  Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

  Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.Tool material: Powder metal high-speed steelThread type: MetricHole type: For blind holesMaterial: General steel / heat-treated steelCoating: Surface treatment for steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M12	0.5 ～ 1.75	2.5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  17.33 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, V Coated, V-SFT

  Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M16	0.5 ～ 2	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  17.63 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Aluminium, EX-AL-SFT

  Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-cast

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1	2.5P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  15.96 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

  Ideal for deep hole drilling of stainless steel beyond 2D.Working material: Stainless steel / copper / resinCoating: Surface treatment, steam oxide treatment.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2.6 ～ M10	0.45 ～ 1.5	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  10.88 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  14.52 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Low Spiral LW-SFT

  Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M6	1	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  9.50 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT

  Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M16 ～ M24	1.5 ～ 3	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  33.84 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for High-Carbon Steels EX-HC-SFT

  Suitable for drilling holes in materials such as high carbon materials greater than medium carbon steel, die steel, alloyed steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M10 ～ M12	1.25 ～ 1.5	3P	Vanadium High-Speed Steel	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  16.26 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Copper, CU-SFT

  Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M10	1.5	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Cena (bez DPH) od:

  26.27 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

  Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2.6 ～ M10	0.45 ～ 1.5	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  9.91 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • SLEVA
  • Volume Discount

  OSG

  Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M1.4 ～ M48	0.3 ～ 5	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  11.72 €

  Speciální cena

  Běžné datum odeslání:

  Skladová položka: 1 pracovní den

  Některé položky lze dodat ve stejný den

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M16	2	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  84.11 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT

  Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M10 ～ M16	1.5	2.5P	Vanadium High-Speed Steel	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  14.22 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  TRUSCO NAKAYAMA

  Spiral Tap (for metal screws)

  [Characteristics] Spiral tap for regular steel. [Use] For pilot hole machining. Work materials: general steel, low to medium carbon steel, alloy steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M5	0.7 ～ 0.8	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Spiral Tap	For blind hole	-

  Cena (bez DPH) od:

  11.47 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Aluminium AL+SP / AL-SP

  A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.[Features]· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.· Stable, clean thread machining can be performed.[Applications]· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M4	0.5 ～ 0.7	2.5P	High-speed steel	Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  13.17 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YAMAWA MFG

  Short Spiral Tap for Stainless Steel SU-S-SP

  [Features]· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.5	2.5P	High-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  17.15 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YAMAWA MFG

  Spiral Tap for Stainless Steel SU+SP / SU-SP

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2 ～ M12	0.4 ～ 1.75	2.5P	High-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  12.38 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  YAMAWA MFG

  Spiral Tap for Stainless Steel Through Holes SU+SL

  Work hardening in blind hole processing of significantly gummy materials, from stainless steel and chrome steel to molybdenum steel. Processable in mid-speed range of 10 M/MIN ~ 20 M/MIN.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M6	0.5 ～ 1	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Spiral Tap	For through hole	N/A

  Cena (bez DPH) od:

  12.38 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  YAMAWA MFG

  Titanium Coated Through Hole Spiral Tap AU+SL

  Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3	0.5	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For through hole	Available

  Cena (bez DPH) od:

  21.97 €

  Běžné datum odeslání:

  10 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Titanium Alloy, for Through Hole ZET-P

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M6	1	5P	Powder high-speed steel	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Spiral Tap	For through hole	N/A

  Cena (bez DPH) od:

  25.85 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Titanium Alloy ZET-B

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M10	0.5 ～ 1.25	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  23.36 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Nickel Base Alloy ZEN-B

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Více informací

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M8	0.5 ～ 1.25	3P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez DPH) od:

  23.36 €

  Běžné datum odeslání:

  6 pracovních dnů

  Konfigurovat