Registrace
1
Podmínky filtrování

Vymazat vše

  • Stock
  • Tool Diameter(mm)
    [1.8–5/0.1mm jednotek]
    [0.3–15.99/0.01mm jednotek]
    [0.3–15.995/0.005mm jednotek]
  • Shank Type
  • work material
  • Groove Length(mm)
    [0.5–48/0.5mm jednotek]
    [3–10/1mm jednotek]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • Reamers (Groove Shape: Straight)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Cena (bez DPH) od:
      35.50 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Solid Long Hand Reamer CSLHR
      • Volume Discount

      EIKOSHA

      Solid Long Hand Reamer CSLHR

      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
      Cena (bez DPH) od:
      80.61 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Solid Taper Pin Reamer CSTPR
      • Volume Discount

      EIKOSHA

      Solid Taper Pin Reamer CSTPR

      For 1/50 Taper Pins
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
      Cena (bez DPH) od:
      62.64 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide µ (Mu) Reamer
      • SLEVA
      • Volume Discount

      FPTOOLS

      Carbide µ (Mu) Reamer

      [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
      Cena (bez DPH) od:
      65.44 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Machine Reamer
      • Volume Discount

      EIKOSHA

      Machine Reamer

      A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      2.95 ~ 85Taper shank / Morse Taper ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 215N/AStraightN/A--
      Cena (bez DPH) od:
      96.50 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Straight Reamer with Carbide Bottom Blade
      • Volume Discount

      MISUMI

      Straight Reamer with Carbide Bottom Blade

      [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
      Cena (bez DPH) od:
      52.82 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
      • Volume Discount

      MISUMI

      High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model

      [Features] -Standard hand reamer with straight blade-Cutting diameter can be selected in units of 0.01 mm.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.5 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 150N/AStraightN/A--
      Cena (bez DPH) od:
      24.27 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Long Handle Reamer LHR
      • Volume Discount

      EIKOSHA

      Long Handle Reamer LHR

      For long type deep hole, Hold on slop to improve assistance 1
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      1/2 ~ 26Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50 ~ 250N/AStraightN/A--
      Cena (bez DPH) od:
      94.64 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Machine Reamer MR (SKH51)

        TAIYO-TOOL

        Machine Reamer MR (SKH51)

        [Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] N
        Více informací
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        1-5/8 ~ 80Morse Taper Shank-35 ~ 220N/AStraightN/A--
        Cena (bez DPH) od:
        94.18 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

          MISUMI

          Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Carbide Precision Straight Reamer

            MISUMI

            Carbide Precision Straight Reamer

            It is capable of finishing holes with clean surface roughness compared to the normal reamer.
            Více informací
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            0.5 ~ 5.9End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 10N/AStraightN/A--
            Běžné datum odeslání:
            8 pracovních dnů
            Konfigurovat
          • Carbide Pilot Hole Correction Boring Bit

              MISUMI

              Carbide Pilot Hole Correction Boring Bit

              In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1.8 ~ 5End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
              Běžné datum odeslání:
              8 pracovních dnů
              Konfigurovat
            • Solid Reamer CSR
              • Volume Discount

              EIKOSHA

              Solid Reamer CSR

              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              0.4 ~ 20.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]4 ~ 80N/AStraightN/A--
              Cena (bez DPH) od:
              31.73 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                SANDVIK

                Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                -Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○]-AvailableStraightN/A--
                Cena (bez DPH) od:
                260.37 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                  MISUMI

                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                  [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                  Více informací
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                  Běžné datum odeslání:
                  7 pracovních dnů
                  Konfigurovat
                • Carbide Straight Reamer, Regular Model

                    MISUMI

                    Carbide Straight Reamer, Regular Model

                    [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
                    Více informací
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
                    Běžné datum odeslání:
                    7 pracovních dnů
                    Konfigurovat
                  • Carbide Straight Reamer, Long Model

                      MISUMI

                      Carbide Straight Reamer, Long Model

                      [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                      Více informací
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                      Běžné datum odeslání:
                      8 pracovních dnů
                      Konfigurovat
                    • Carbide Boring End Mill
                      • Volume Discount

                      MISUMI

                      Carbide Boring End Mill

                      [Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracy
                      Více informací
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      2 ~ 10End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]12 ~ 52AvailableStraightN/A--
                      Cena (bez DPH) od:
                      106.63 €
                      Běžné datum odeslání:
                      5 pracovních dnů
                      Konfigurovat
                    • High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

                        MISUMI

                        High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

                        [Features] -Standard straight edge machine reamer. Morse taper shank-Cutting diameter selectable in units of 0.01 mm.
                        Více informací
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        2.95 ~ 30.02Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]35 ~ 150N/AStraightN/A--
                        Cena (bez DPH) od:
                        104.25 €
                        Běžné datum odeslání:
                        7 pracovních dnů
                        Konfigurovat
                      • Solid Medium Reamer CSRM
                        • Volume Discount

                        EIKOSHA

                        Solid Medium Reamer CSRM

                        For General-Purpose Wear resistant Carbide K Type Adopted
                        Více informací
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        0.8 ~ 12.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 80N/AStraightN/A--
                        Cena (bez DPH) od:
                        65.16 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Straight Shank Chucking Reamer SCR
                        • SLEVA
                        • Volume Discount

                        EIKOSHA

                        Straight Shank Chucking Reamer SCR

                        For General-Purpose Short blade, long shank, for deep hole finishing
                        Více informací
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        1 ~ 32Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]15 ~ 75N/AStraightN/A--
                        Cena (bez DPH) od:
                        75.51 €
                        Speciální cena
                        Běžné datum odeslání:
                        Skladová položka: 1 pracovní den
                        Některé položky lze dodat ve stejný den
                        Konfigurovat
                      • Morse Taper Reamer (For Hand Use) For Finishing MTR-F

                          EIKOSHA

                          Morse Taper Reamer (For Hand Use) For Finishing MTR-F

                          For Morse Taper Hole (Finish)
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.547 ~ 54.3889.93 ~ 65.076
                          Cena (bez DPH) od:
                          107.83 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Carbide Reamer B Series
                          • Volume Discount

                          FPTOOLS

                          Carbide Reamer B Series

                          [Features] It is possible to drill holes of general steel highly polished, and it is possible to drill without subsequent pilot hole.
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.9 ~ 14Straight ShankGeneral Steel[○] / Resin[○] / Alloy Steel[○]20 ~ 70N/AStraightN/A--
                          Cena (bez DPH) od:
                          47.59 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Carbide Reamer G Series
                          • SLEVA
                          • Volume Discount

                          FPTOOLS

                          Carbide Reamer G Series

                          [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
                          Cena (bez DPH) od:
                          25.27 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • Handle Reamer Straight Blade
                          • SLEVA
                          • Volume Discount

                          FPTOOLS

                          Handle Reamer Straight Blade

                          [Features]· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.· Blade diameter tolerance is unique at +0.005/0(J5).
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.3 ~ 16.02End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]7 ~ 95N/AStraightN/A--
                          Cena (bez DPH) od:
                          19.93 €
                          Speciální cena
                          Běžné datum odeslání:
                          Skladová položka: 1 pracovní den
                          Některé položky lze dodat ve stejný den
                          Konfigurovat
                        • BCCR Carbide Chucking Reamer (Straight Shank)
                          • Volume Discount

                          OKAZAKI SEIKO

                          BCCR Carbide Chucking Reamer (Straight Shank)

                          Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                          Cena (bez DPH) od:
                          126.32 €
                          Běžné datum odeslání:
                          10 pracovních dnů
                          Konfigurovat
                        • Carbide Long Shank Chucking Reamer CSCRL

                            EIKOSHA

                            Carbide Long Shank Chucking Reamer CSCRL

                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            3 ~ 20Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]35 ~ 60N/AStraightN/A--
                            Cena (bez DPH) od:
                            130.66 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Large Machine Reamer LMR (SKH51)

                              TAIYO-TOOL

                              Large Machine Reamer LMR (SKH51)

                              [Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] N
                              Více informací
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              1/2 ~ 50Morse Taper Shank-120 ~ 400N/AStraightN/A--
                              Cena (bez DPH) od:
                              233.90 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                                MISUMI

                                Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                                [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                Více informací
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                0.3 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                Běžné datum odeslání:
                                8 pracovních dnů
                                Konfigurovat
                              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                  MISUMI

                                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                  [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.
                                  Více informací
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                  Běžné datum odeslání:
                                  8 pracovních dnů
                                  Konfigurovat
                                • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                    MISUMI

                                    Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                    [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                    Běžné datum odeslání:
                                    7 pracovních dnů
                                    Konfigurovat
                                  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                      MISUMI

                                      Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                      [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                      Běžné datum odeslání:
                                      8 pracovních dnů
                                      Konfigurovat
                                    • Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
                                      • Volume Discount

                                      MISUMI

                                      Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

                                      [Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      1 ~ 10End Mill ShankGeneral Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 40Available ~ N/AStraightN/A--
                                      Cena (bez DPH) od:
                                      37.11 €
                                      Běžné datum odeslání:
                                      5 pracovních dnů
                                      Konfigurovat
                                    • Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                        MISUMI

                                        Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                        [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                        Více informací
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                        Běžné datum odeslání:
                                        7 pracovních dnů
                                        Konfigurovat
                                      • Carbide Step Reamer, Custom Dimensions Type

                                          MISUMI

                                          Carbide Step Reamer, Custom Dimensions Type

                                          [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                          Více informací
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                          Běžné datum odeslání:
                                          7 pracovních dnů
                                          Konfigurovat
                                        • Coated Solid Reamer CSR-C
                                          • SLEVA
                                          • Volume Discount

                                          EIKOSHA

                                          Coated Solid Reamer CSR-C

                                          The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                          Více informací
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]12 ~ 45AvailableStraightN/A--
                                          Cena (bez DPH) od:
                                          65.29 €
                                          Speciální cena
                                          Běžné datum odeslání:
                                          Skladová položka: 1 pracovní den
                                          Některé položky lze dodat ve stejný den
                                          Konfigurovat
                                        • DLC Carbide Solid Reamer for Aluminum CSR-DLC

                                            EIKOSHA

                                            DLC Carbide Solid Reamer for Aluminum CSR-DLC

                                            Adopts low friction coefficient DLC coating for aluminum/nonferrous metal
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.5 ~ 12.05End Mill ShankCast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]6 ~ 45AvailableStraightN/A--
                                            Cena (bez DPH) od:
                                            95.24 €
                                            Běžné datum odeslání:
                                            6 pracovních dnů
                                            Konfigurovat
                                          • Carbide Solid Pivot Reamer CSRR-3
                                            • Volume Discount

                                            EIKOSHA

                                            Carbide Solid Pivot Reamer CSRR-3

                                            Small Diameter Use Reamer φ193 Shank
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.2 ~ 3Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]3 ~ 25N/AStraightN/A--
                                            Cena (bez DPH) od:
                                            49.74 €
                                            Běžné datum odeslání:
                                            6 pracovních dnů
                                            Konfigurovat
                                          • Carbide Chucking Reamer CSCRS
                                            • Volume Discount

                                            EIKOSHA

                                            Carbide Chucking Reamer CSCRS

                                            For General-Purpose Short blade, long shank, for deep hole finishing
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            1 ~ 30Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 75N/AStraightN/A--
                                            Cena (bez DPH) od:
                                            83.18 €
                                            Běžné datum odeslání:
                                            6 pracovních dnů
                                            Konfigurovat
                                          • Taper Pin Reamer TPR
                                            • SLEVA
                                            • Volume Discount

                                            EIKOSHA

                                            Taper Pin Reamer TPR

                                            For 1/48 and 1/50 Taper Pins
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]99 ~ 194N/AStraightN/A6 ~ 127.88 ~ 15.74
                                            Cena (bez DPH) od:
                                            45.12 €
                                            Speciální cena
                                            Běžné datum odeslání:
                                            Skladová položka: 1 pracovní den
                                            Některé položky lze dodat ve stejný den
                                            Konfigurovat
                                          • Taper Pin Reamer for Machines TPRT

                                              EIKOSHA

                                              Taper Pin Reamer for Machines TPRT

                                              Morse Taper Shank for 1/50 Taper Pins
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]63 ~ 335N/AStraightN/A3 ~ 404.16 ~ 46.3
                                              Cena (bez DPH) od:
                                              100.04 €
                                              Běžné datum odeslání:
                                              6 pracovních dnů
                                              Konfigurovat
                                            • Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

                                                EIKOSHA

                                                Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

                                                Morse Taper Shank For Morse Taper Hole (Rough Finish)
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.297 ~ 54.139.68 ~ 64.819
                                                Cena (bez DPH) od:
                                                125.61 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • Carbide Reamer C Series
                                                • Volume Discount

                                                FPTOOLS

                                                Carbide Reamer C Series

                                                [Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                2.91 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 25N/AStraightN/A--
                                                Cena (bez DPH) od:
                                                43.46 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • F.P. Gold Reamer Straight Blade
                                                • SLEVA
                                                • Volume Discount

                                                FPTOOLS

                                                F.P. Gold Reamer Straight Blade

                                                [Features]· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.· Furthermore, it also boasts a super-low price with a discount of approximately 50%.· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.· Outstanding circularity and surface roughness.· Shank diameter is endmill shank type.
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                1 ~ 14.05End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 85AvailableStraightN/A--
                                                Cena (bez DPH) od:
                                                29.83 €
                                                Speciální cena
                                                Běžné datum odeslání:
                                                Skladová položka: 1 pracovní den
                                                Některé položky lze dodat ve stejný den
                                                Konfigurovat
                                              • Straight Shank Chucking Reamer
                                                • Volume Discount

                                                FPTOOLS

                                                Straight Shank Chucking Reamer

                                                [Features] -The reamer expands the hole as the workpiece rotates during cutting.
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                1 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 50N/AStraightN/A--
                                                Cena (bez DPH) od:
                                                94.60 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat