Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Tool Diameter(mm)
    [1.8–5/0.1mm jednotek]
    [0.3–15.99/0.01mm jednotek]
    [0.3–15.995/0.005mm jednotek]
  • Groove Length(mm)
    [0.5–48/0.5mm jednotek]
    [3–10/1mm jednotek]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Cena (bez DPH) od:
      35.50 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide Reamer G Series
      • SLEVA
      • Volume Discount

      FPTOOLS

      Carbide Reamer G Series

      [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
      Cena (bez DPH) od:
      25.27 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Carbide Helical Reamer
      • Volume Discount

      MISUMI

      Carbide Helical Reamer

      [Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      3 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 40N/ASpiralN/A--
      Cena (bez DPH) od:
      80.25 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide Solid Pivot Reamer CSRR-3
      • Volume Discount

      EIKOSHA

      Carbide Solid Pivot Reamer CSRR-3

      Small Diameter Use Reamer φ193 Shank
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.2 ~ 3Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]3 ~ 25N/AStraightN/A--
      Cena (bez DPH) od:
      49.74 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Adjustable Reamer
      • SLEVA

      FPTOOLS

      Adjustable Reamer

      Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      6.35~7.15 ~ 30.25~34.25-General Steel[○] / Alloy Steel[○]35 ~ 98--N/A--
      Cena (bez DPH) od:
      91.18 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Solid Reamer CSR
      • Volume Discount

      EIKOSHA

      Solid Reamer CSR

      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.4 ~ 20.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]4 ~ 80N/AStraightN/A--
      Cena (bez DPH) od:
      31.73 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide Spiral Reamer, High-Precision Tolerance Model
      • Volume Discount

      MISUMI

      Carbide Spiral Reamer, High-Precision Tolerance Model

      [Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      1 ~ 13End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ~ 44N/ASpiralN/A--
      Cena (bez DPH) od:
      40.30 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide µ (Mu) Reamer
      • SLEVA
      • Volume Discount

      FPTOOLS

      Carbide µ (Mu) Reamer

      [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
      Cena (bez DPH) od:
      65.44 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • CCR Carbide Chucking Reamer
      • Volume Discount

      OKAZAKI SEIKO

      CCR Carbide Chucking Reamer

      A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
      Cena (bez DPH) od:
      36.45 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide High Helical Reamer CHHR

        EIKOSHA

        Carbide High Helical Reamer CHHR

        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2 ~ 14Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]10 ~ 29N/AHelicalN/A--
        Cena (bez DPH) od:
        94.11 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide RZ Reamer CRZ-S

          DAIICHITOOL

          Carbide RZ Reamer CRZ-S

          [Features]· Chips are discharged toward the back instead of being accumulated at the bottom.· The depth is freely controlled by adjusting the shank.
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 13Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]20 ~ 30-Spiral---
          Cena (bez DPH) od:
          133.31 €
          Běžné datum odeslání:
          8 pracovních dnů
          Konfigurovat
        • Straight Reamer with Carbide Bottom Blade
          • Volume Discount

          MISUMI

          Straight Reamer with Carbide Bottom Blade

          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
          Cena (bez DPH) od:
          52.82 €
          Běžné datum odeslání:
          5 pracovních dnů
          Konfigurovat
        • Carbide Step Reamer, Custom Dimensions Type

            MISUMI

            Carbide Step Reamer, Custom Dimensions Type

            [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
            Více informací
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
            Běžné datum odeslání:
            7 pracovních dnů
            Konfigurovat
          • DLC Carbide Solid Reamer for Aluminium CSR-DLC

              EIKOSHA

              DLC Carbide Solid Reamer for Aluminium CSR-DLC

              Adopts low friction coefficient DLC coating for aluminum/nonferrous metal
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              0.5 ~ 12.05End Mill ShankCast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○]6 ~ 45AvailableStraightN/A--
              Cena (bez DPH) od:
              95.24 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Carbide Reamer H Series
              • SLEVA
              • Volume Discount

              FPTOOLS

              Carbide Reamer H Series

              [Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1 ~ 15.5End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]8 ~ 45N/ASpiralN/A--
              Cena (bez DPH) od:
              110.00 €
              Speciální cena
              Běžné datum odeslání:
              Skladová položka: 1 pracovní den
              Některé položky lze dodat ve stejný den
              Konfigurovat
            • CER Reamer with Carbide End Flutes
              • Volume Discount

              OKAZAKI SEIKO

              CER Reamer with Carbide End Flutes

              A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              3 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
              Cena (bez DPH) od:
              97.90 €
              Běžné datum odeslání:
              10 pracovních dnů
              Konfigurovat
            • For Carbide SV Reamer H7
              • Volume Discount

              OMIKOGYO

              For Carbide SV Reamer H7

              For more precise, more efficient operation.
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              3 ~ 6End Mill ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Alloy Steel[○]28 ~ 43AvailableSpiralN/A--
              Cena (bez DPH) od:
              120.37 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Solid Reamer for Through Holes HR500D 1686

                GUHRING

                Solid Reamer for Through Holes HR500D 1686

                [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Coolant is supplied through the shank, helping achieve reliable extraction of cutting chips.
                Více informací
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3 ~ 20--12 ~ 25Available----
                Cena (bez DPH) od:
                229.66 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Solid Reamer for Blind Holes HR500S 1675

                  GUHRING

                  Solid Reamer for Blind Holes HR500S 1675

                  [Features]· High-quality hole finish-machining can be performed at ultra high speed.· The applicable range of processing materials is wide, the processing cost can be reduced, and high reliability is provided.· Lubricates internally using the center-through hole, helping achieve reliable extraction of cutting chips.
                  Více informací
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  2.97 ~ 12.03--12 ~ 19Available----
                  Cena (bez DPH) od:
                  272.64 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Solid Long Hand Reamer CSLHR
                  • Volume Discount

                  EIKOSHA

                  Solid Long Hand Reamer CSLHR

                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
                  Cena (bez DPH) od:
                  80.61 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Carbide Powerful Reamer (Straight Shank) BCPR

                    OKAZAKI SEIKO

                    Carbide Powerful Reamer (Straight Shank) BCPR

                    Flat tip type with straight shank specification. Torsion angle 45°
                    Více informací
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    12.5 ~ 30Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○]36 ~ 46N/AHelicalN/A--
                    Cena (bez DPH) od:
                    139.11 €
                    Běžné datum odeslání:
                    10 pracovních dnů
                    Konfigurovat
                  • Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                      SANDVIK

                      Coro Reamer 835 for Cylindrical Holes Coro Reamer 835 - Multi-Edged Design Straight Flute for Blind Holes

                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      -Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○]-AvailableStraightN/A--
                      Cena (bez DPH) od:
                      260.37 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • SANDVIK CoroReamer 435 Solid Carbide Reamer

                        SANDVIK

                        SANDVIK CoroReamer 435 Solid Carbide Reamer

                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        4 ~ 20-General Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Alloy Steel[○]12 ~ 25-----
                        Cena (bez DPH) od:
                        149.54 €
                        Běžné datum odeslání:
                        5 pracovních dnů
                        Konfigurovat
                      • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                          MISUMI

                          Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                          Běžné datum odeslání:
                          7 pracovních dnů
                          Konfigurovat
                        • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                            MISUMI

                            Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                            [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                            Více informací
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            0.3 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                            Běžné datum odeslání:
                            8 pracovních dnů
                            Konfigurovat
                          • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                              MISUMI

                              Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                              [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                              Více informací
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                              Běžné datum odeslání:
                              7 pracovních dnů
                              Konfigurovat
                            • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                MISUMI

                                Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.
                                Více informací
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                Běžné datum odeslání:
                                8 pracovních dnů
                                Konfigurovat
                              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                  MISUMI

                                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                  [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                                  Více informací
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                  Běžné datum odeslání:
                                  7 pracovních dnů
                                  Konfigurovat
                                • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                    MISUMI

                                    Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                    [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                    Běžné datum odeslání:
                                    8 pracovních dnů
                                    Konfigurovat
                                  • Spiral Reamer with Carbide Bottom Blade
                                    • Volume Discount

                                    MISUMI

                                    Spiral Reamer with Carbide Bottom Blade

                                    [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral grooves
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]20 ~ 30N/ASpiralAvailable--
                                    Cena (bez DPH) od:
                                    86.03 €
                                    Běžné datum odeslání:
                                    5 pracovních dnů
                                    Konfigurovat
                                  • Carbide Straight Reamer, Regular Model

                                      MISUMI

                                      Carbide Straight Reamer, Regular Model

                                      [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
                                      Běžné datum odeslání:
                                      7 pracovních dnů
                                      Konfigurovat
                                    • Carbide Straight Reamer, Long Model

                                        MISUMI

                                        Carbide Straight Reamer, Long Model

                                        [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                                        Více informací
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                                        Běžné datum odeslání:
                                        8 pracovních dnů
                                        Konfigurovat
                                      • Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
                                        • Volume Discount

                                        MISUMI

                                        Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

                                        [Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).
                                        Více informací
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        1 ~ 10End Mill ShankGeneral Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 40Available ~ N/AStraightN/A--
                                        Cena (bez DPH) od:
                                        37.11 €
                                        Běžné datum odeslání:
                                        5 pracovních dnů
                                        Konfigurovat
                                      • Carbide Precision Straight Reamer

                                          MISUMI

                                          Carbide Precision Straight Reamer

                                          It is capable of finishing holes with clean surface roughness compared to the normal reamer.
                                          Více informací
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          0.5 ~ 5.9End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 10N/AStraightN/A--
                                          Běžné datum odeslání:
                                          8 pracovních dnů
                                          Konfigurovat
                                        • Carbide Pilot Hole Correction Boring Bit

                                            MISUMI

                                            Carbide Pilot Hole Correction Boring Bit

                                            In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            1.8 ~ 5End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
                                            Běžné datum odeslání:
                                            8 pracovních dnů
                                            Konfigurovat
                                          • Carbide Boring End Mill
                                            • Volume Discount

                                            MISUMI

                                            Carbide Boring End Mill

                                            [Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracy
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            2 ~ 10End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]12 ~ 52AvailableStraightN/A--
                                            Cena (bez DPH) od:
                                            106.63 €
                                            Běžné datum odeslání:
                                            5 pracovních dnů
                                            Konfigurovat
                                          • Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                              MISUMI

                                              Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                              [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                              Běžné datum odeslání:
                                              7 pracovních dnů
                                              Konfigurovat
                                            • Carbide Reamer for Stainless Steel CSUSR-A
                                              • Volume Discount

                                              EIKOSHA

                                              Carbide Reamer for Stainless Steel CSUSR-A

                                              Shape Suitable for Hard-to-Cut Materials including Stainless Steel, Heat-Resistant Coated, Wear-Resistant Material, Right Helix
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              0.5 ~ 12.05End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○]6 ~ 45AvailableSpiralN/A--
                                              Cena (bez DPH) od:
                                              85.75 €
                                              Běžné datum odeslání:
                                              6 pracovních dnů
                                              Konfigurovat
                                            • Coated Solid Reamer CSR-C
                                              • SLEVA
                                              • Volume Discount

                                              EIKOSHA

                                              Coated Solid Reamer CSR-C

                                              The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]12 ~ 45AvailableStraightN/A--
                                              Cena (bez DPH) od:
                                              65.29 €
                                              Speciální cena
                                              Běžné datum odeslání:
                                              Skladová položka: 1 pracovní den
                                              Některé položky lze dodat ve stejný den
                                              Konfigurovat
                                            • Coated Solid Spiral Reamer CSPR-C
                                              • SLEVA
                                              • Volume Discount

                                              EIKOSHA

                                              Coated Solid Spiral Reamer CSPR-C

                                              The Usage of the TICN1297 Coating Prevents Deposition, and Improves Finished Surface Roughness
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              0.8 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]15 ~ 45AvailableSpiralN/A--
                                              Cena (bez DPH) od:
                                              69.45 €
                                              Speciální cena
                                              Běžné datum odeslání:
                                              Skladová položka: 1 pracovní den
                                              Některé položky lze dodat ve stejný den
                                              Konfigurovat
                                            • Reamer with Carbide Oil Hole for Stop Holes CSOER

                                                EIKOSHA

                                                Reamer with Carbide Oil Hole for Stop Holes CSOER

                                                Bottom blade with blind hole reamer Oil hole right twist
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                2.95 ~ 16Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30N/ASpiralAvailable--
                                                Cena (bez DPH) od:
                                                120.41 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • Solid Medium Reamer CSRM
                                                • Volume Discount

                                                EIKOSHA

                                                Solid Medium Reamer CSRM

                                                For General-Purpose Wear resistant Carbide K Type Adopted
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                0.8 ~ 12.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 80N/AStraightN/A--
                                                Cena (bez DPH) od:
                                                65.16 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • Carbide Chucking Reamer CSCRS
                                                • Volume Discount

                                                EIKOSHA

                                                Carbide Chucking Reamer CSCRS

                                                For General-Purpose Short blade, long shank, for deep hole finishing
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                1 ~ 30Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 75N/AStraightN/A--
                                                Cena (bez DPH) od:
                                                83.18 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • Solid Taper Pin Reamer CSTPR
                                                • Volume Discount

                                                EIKOSHA

                                                Solid Taper Pin Reamer CSTPR

                                                For 1/50 Taper Pins
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
                                                Cena (bez DPH) od:
                                                62.64 €
                                                Běžné datum odeslání:
                                                6 pracovních dnů
                                                Konfigurovat
                                              • Solid Pin Gate Reamer CSPGR

                                                  EIKOSHA

                                                  Solid Pin Gate Reamer CSPGR

                                                  Sprue Hole Drilling Reamer for Pin-Gate Mold
                                                  Více informací
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]25 ~ 60N/ASpiralN/A-1.42 ~ 9.01
                                                  Cena (bez DPH) od:
                                                  107.23 €
                                                  Běžné datum odeslání:
                                                  6 pracovních dnů
                                                  Konfigurovat