Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Carbide Reamers (work material: General Steel)
82 položek
* Informace o dnech dodání, přepravních nákladech a cenách
- Volume Discount
OSG
The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 13.05 End Mill Shank / Straight Shank General Steel[○] - N/A Straight N/A - - KonfigurovatCena (bez DPH) od:35.50 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 10.05 Straight Shank General Steel[◎] 20 ～ 150 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:80.61 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 20.05 Straight Shank General Steel[◎] 4 ～ 80 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:31.73 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 6.35～7.15 ～ 30.25～34.25 - General Steel[○] 35 ～ 98 - - N/A - - KonfigurovatCena (bez DPH) od:91.18 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
MISUMI
Carbide Spiral Reamer, High-Precision Tolerance Model
[Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 13 End Mill Shank General Steel[◎] 10 ～ 44 N/A Spiral N/A - - KonfigurovatCena (bez DPH) od:40.30 €Běžné datum odeslání:5 pracovních dnů
- SLEVA
- Volume Discount
FPTOOLS
[Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 10.009 End Mill Shank General Steel[◎] 5 ～ 40 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:65.44 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- SLEVA
- Volume Discount
FPTOOLS
[Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.2 ～ 12.1 End Mill Shank General Steel[◎] 3 ～ 45 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:25.27 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
DAIICHITOOL
[Features]· Chips are discharged toward the back instead of being accumulated at the bottom.· The depth is freely controlled by adjusting the shank.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 13 Straight Shank General Steel[○] 20 ～ 30 - Spiral - - - KonfigurovatCena (bez DPH) od:133.31 €Běžné datum odeslání:8 pracovních dnů
- Volume Discount
MISUMI
Straight Reamer with Carbide Bottom Blade
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 10.01 End Mill Shank General Steel[○] 27 ～ 40 N/A Straight Available - - KonfigurovatCena (bez DPH) od:52.82 €Běžné datum odeslání:5 pracovních dnů
- Volume Discount
MISUMI
[Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 10 End Mill Shank General Steel[◎] 25 ～ 40 N/A Spiral N/A - - KonfigurovatCena (bez DPH) od:80.25 €Běžné datum odeslání:5 pracovních dnů
MISUMI
Carbide Pilot Hole Correction Boring Bit
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1.8 ～ 5 End Mill Shank General Steel[○] - N/A Straight N/A - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
- Volume Discount
MISUMI
[Features] -Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys-Drilling is possible under cutting conditions of 60 m/min or more-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming-Ideal for drilling precision threads with a high percentage of thread engagement-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracyVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2 ～ 10 End Mill Shank General Steel[○] 12 ～ 52 Available Straight N/A - - KonfigurovatCena (bez DPH) od:106.63 €Běžné datum odeslání:5 pracovních dnů
- SLEVA
- Volume Discount
FPTOOLS
[Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, leftVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 15.5 End Mill Shank General Steel[◎] 8 ～ 45 N/A Spiral N/A - - KonfigurovatCena (bez DPH) od:110.00 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- Volume Discount
OKAZAKI SEIKO
BCCR Carbide Chucking Reamer (Straight Shank)
Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 12.5 ～ 30 Straight Shank General Steel[◎] 36 ～ 46 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:126.32 €Běžné datum odeslání:10 pracovních dnů- Volume Discount
OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 12 Straight Shank General Steel[◎] 26 ～ 31 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:36.45 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
OKAZAKI SEIKO
CER Reamer with Carbide End Flutes
A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 12 End Mill Shank General Steel[◎] 20 ～ 31 N/A Spiral Available - - KonfigurovatCena (bez DPH) od:97.90 €Běžné datum odeslání:10 pracovních dnů
EIKOSHA
Carbide Oil Hole Spiral Tapered Reamer CSPOTR
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - End Mill Shank General Steel[◎] 40 ～ 55 N/A Spiral N/A - 12.2 ～ 30.2 KonfigurovatCena (bez DPH) od:306.66 €Běžné datum odeslání:6 pracovních dnů
EIKOSHA
Carbide High Helical Reamer CHHR
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2 ～ 14 Straight Shank General Steel[◎] 10 ～ 29 N/A Helical N/A - - KonfigurovatCena (bez DPH) od:94.11 €Běžné datum odeslání:6 pracovních dnů
SANDVIK
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - Straight Shank General Steel[○] - Available Straight N/A - - KonfigurovatCena (bez DPH) od:268.33 €Běžné datum odeslání:8 pracovních dnů
SANDVIK
SANDVIK CoroReamer 435 Solid Carbide Reamer
Tool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 4 ～ 20 - General Steel[○] 12 ～ 25 - - - - - KonfigurovatCena (bez DPH) od:149.54 €Běžné datum odeslání:5 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 15.995 End Mill Shank General Steel[○] 0.5 ～ 48 N/A Straight Available - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holesVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 5.995 End Mill Shank General Steel[○] 0.5 ～ 34 N/A Straight Available - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot holeVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 15.995 End Mill Shank General Steel[○] 0.5 ～ 48 N/A Straight Available - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 5.995 End Mill Shank General Steel[○] 0.5 ～ 34 N/A Straight Available - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot holeVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 15.995 End Mill Shank General Steel[○] 0.5 ～ 48 N/A Straight Available - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
MISUMI
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
[Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holesVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.4 ～ 5.995 End Mill Shank General Steel[○] 0.5 ～ 34 N/A Straight Available - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
- Volume Discount
MISUMI
Spiral Reamer with Carbide Bottom Blade
[Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral groovesVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 3 ～ 10.01 End Mill Shank General Steel[○] 20 ～ 30 N/A Spiral Available - - KonfigurovatCena (bez DPH) od:86.03 €Běžné datum odeslání:5 pracovních dnů
MISUMI
Carbide Straight Reamer, Regular Model
[Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute lengthVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 15.99 End Mill Shank General Steel[○] 0.5 ～ 48 N/A Straight N/A - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
MISUMI
Carbide Straight Reamer, Long Model
[Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.3 ～ 5.99 End Mill Shank General Steel[○] 0.5 ～ 34 N/A Straight N/A - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
- Volume Discount
MISUMI
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
[Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 10 End Mill Shank General Steel[○/◎] 12 ～ 40 Available ～ N/A Straight N/A - - KonfigurovatCena (bez DPH) od:37.11 €Běžné datum odeslání:5 pracovních dnů
MISUMI
Carbide Precision Straight Reamer
It is capable of finishing holes with clean surface roughness compared to the normal reamer.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 5.9 End Mill Shank General Steel[○] 3 ～ 10 N/A Straight N/A - - KonfigurovatBěžné datum odeslání:8 pracovních dnů
MISUMI
Carbide Step Reamer, Custom Dimensions / Long Shank Type
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possibleVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - End Mill Shank General Steel[◎] - N/A Straight - - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
MISUMI
Carbide Step Reamer, Custom Dimensions Type
[Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possibleVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - End Mill Shank General Steel[◎] - N/A Straight - - - KonfigurovatBěžné datum odeslání:7 pracovních dnů
- Volume Discount
EIKOSHA
Carbide Reamer for Stainless Steel CSUSR-A
Shape Suitable for Hard-to-Cut Materials including Stainless Steel, Heat-Resistant Coated, Wear-Resistant Material, Right HelixVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.5 ～ 12.05 End Mill Shank General Steel[○] 6 ～ 45 Available Spiral N/A - - KonfigurovatCena (bez DPH) od:85.75 €Běžné datum odeslání:6 pracovních dnů
- SLEVA
- Volume Discount
EIKOSHA
The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface RoughnessVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.8 ～ 12.05 End Mill Shank General Steel[◎] 12 ～ 45 Available Straight N/A - - KonfigurovatCena (bez DPH) od:65.29 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
- SLEVA
- Volume Discount
EIKOSHA
Coated Solid Spiral Reamer CSPR-C
The Usage of the TICN1297 Coating Prevents Deposition, and Improves Finished Surface RoughnessVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.8 ～ 12.05 End Mill Shank General Steel[◎] 15 ～ 45 Available Spiral N/A - - KonfigurovatCena (bez DPH) od:69.45 €Speciální cenaBěžné datum odeslání:Skladová položka: 1 pracovní denNěkteré položky lze dodat ve stejný den
EIKOSHA
Reamer with Carbide Oil Hole for Stop Holes CSOER
Bottom blade with blind hole reamer Oil hole right twistVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 16 Straight Shank General Steel[◎] 16 ～ 30 N/A Spiral Available - - KonfigurovatCena (bez DPH) od:120.41 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
Carbide Solid Pivot Reamer CSRR-3
Small Diameter Use Reamer φ193 ShankVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.2 ～ 3 Straight Shank General Steel[◎] 3 ～ 25 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:49.74 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
For General-Purpose Wear resistant Carbide K Type AdoptedVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.8 ～ 12.05 Straight Shank General Steel[◎] 15 ～ 80 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:65.16 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
For General-Purpose Short blade, long shank, for deep hole finishingVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 1 ～ 30 Straight Shank General Steel[◎] 15 ～ 75 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:83.18 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
EIKOSHA
For 1/50 Taper PinsVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - Straight Shank General Steel[◎] 28 ～ 194 N/A Straight N/A 1 ～ 13 1.46 ～ 16.74 KonfigurovatCena (bez DPH) od:62.64 €Běžné datum odeslání:6 pracovních dnů
EIKOSHA
Sprue Hole Drilling Reamer for Pin-Gate MoldVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter - Straight Shank General Steel[◎] 25 ～ 60 N/A Spiral N/A - 1.42 ～ 9.01 KonfigurovatCena (bez DPH) od:107.23 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
FPTOOLS
Carbide Reamer FP Platinum Reamer
[Features]· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.· High-precision end mill shank: Shank tolerance of h5 is adopted.· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.95 ～ 12.005 End Mill Shank General Steel[◎] 15 ～ 40 Available Spiral N/A - - KonfigurovatCena (bez DPH) od:107.77 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
FPTOOLS
[Features] It is possible to drill holes of general steel highly polished, and it is possible to drill without subsequent pilot hole.Více informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 0.9 ～ 14 Straight Shank General Steel[○] 20 ～ 70 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:47.59 €Běžné datum odeslání:6 pracovních dnů
- Volume Discount
FPTOOLS
[Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mindVíce informacíTool Diameter(mm) Shank Type work material Groove Length(mm) Coating Y/N Groove Shape Base Blade Y/N Tip diameter Large End Diameter 2.91 ～ 12.1 End Mill Shank General Steel[◎] 20 ～ 25 N/A Straight N/A - - KonfigurovatCena (bez DPH) od:43.46 €Běžné datum odeslání:6 pracovních dnů
