Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Tool Diameter(mm)
    [1.8–5/0.1mm jednotek]
    [0.3–15.99/0.01mm jednotek]
    [0.3–15.995/0.005mm jednotek]
  • Shank Type
  • work material
  • Groove Length(mm)
    [0.5–48/0.5mm jednotek]
    [3–10/1mm jednotek]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Cena (bez DPH) od:
      35.50 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide Reamer G Series
      • SLEVA
      • Volume Discount

      FPTOOLS

      Carbide Reamer G Series

      [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
      Cena (bez DPH) od:
      25.27 €
      Speciální cena
      Běžné datum odeslání:
      Skladová položka: 1 pracovní den
      Některé položky lze dodat ve stejný den
      Konfigurovat
    • Carbide Helical Reamer
      • Volume Discount

      MISUMI

      Carbide Helical Reamer

      [Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      3 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 40N/ASpiralN/A--
      Cena (bez DPH) od:
      80.25 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • Carbide Solid Pivot Reamer CSRR-3
      • Volume Discount

      EIKOSHA

      Carbide Solid Pivot Reamer CSRR-3

      Small Diameter Use Reamer φ193 Shank
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.2 ~ 3Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]3 ~ 25N/AStraightN/A--
      Cena (bez DPH) od:
      49.74 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Solid Reamer CSR
      • Volume Discount

      EIKOSHA

      Solid Reamer CSR

      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.4 ~ 20.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]4 ~ 80N/AStraightN/A--
      Cena (bez DPH) od:
      31.73 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide Spiral Reamer, High-Precision Tolerance Model
      • Volume Discount

      MISUMI

      Carbide Spiral Reamer, High-Precision Tolerance Model

      [Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      1 ~ 13End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ~ 44N/ASpiralN/A--
      Cena (bez DPH) od:
      40.30 €
      Běžné datum odeslání:
      5 pracovních dnů
      Konfigurovat
    • CCR Carbide Chucking Reamer
      • Volume Discount

      OKAZAKI SEIKO

      CCR Carbide Chucking Reamer

      A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
      Cena (bez DPH) od:
      36.45 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Carbide High Helical Reamer CHHR

        EIKOSHA

        Carbide High Helical Reamer CHHR

        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2 ~ 14Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]10 ~ 29N/AHelicalN/A--
        Cena (bez DPH) od:
        94.11 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Straight Reamer with Carbide Bottom Blade
        • Volume Discount

        MISUMI

        Straight Reamer with Carbide Bottom Blade

        [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
        Více informací
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
        Cena (bez DPH) od:
        52.82 €
        Běžné datum odeslání:
        5 pracovních dnů
        Konfigurovat
      • Carbide Step Reamer, Custom Dimensions Type

          MISUMI

          Carbide Step Reamer, Custom Dimensions Type

          [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
          Běžné datum odeslání:
          7 pracovních dnů
          Konfigurovat
        • Carbide µ (Mu) Reamer
          • SLEVA
          • Volume Discount

          FPTOOLS

          Carbide µ (Mu) Reamer

          [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
          Cena (bez DPH) od:
          65.44 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • Carbide Reamer H Series
          • SLEVA
          • Volume Discount

          FPTOOLS

          Carbide Reamer H Series

          [Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1 ~ 15.5End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]8 ~ 45N/ASpiralN/A--
          Cena (bez DPH) od:
          110.00 €
          Speciální cena
          Běžné datum odeslání:
          Skladová položka: 1 pracovní den
          Některé položky lze dodat ve stejný den
          Konfigurovat
        • CER Reamer with Carbide End Flutes
          • Volume Discount

          OKAZAKI SEIKO

          CER Reamer with Carbide End Flutes

          A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          3 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
          Cena (bez DPH) od:
          97.90 €
          Běžné datum odeslání:
          10 pracovních dnů
          Konfigurovat
        • Solid Long Hand Reamer CSLHR
          • Volume Discount

          EIKOSHA

          Solid Long Hand Reamer CSLHR

          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
          Cena (bez DPH) od:
          80.61 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Carbide Powerful Reamer (Straight Shank) BCPR

            OKAZAKI SEIKO

            Carbide Powerful Reamer (Straight Shank) BCPR

            Flat tip type with straight shank specification. Torsion angle 45°
            Více informací
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            12.5 ~ 30Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○]36 ~ 46N/AHelicalN/A--
            Cena (bez DPH) od:
            139.11 €
            Běžné datum odeslání:
            10 pracovních dnů
            Konfigurovat
          • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

              MISUMI

              Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

              [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
              Více informací
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
              Běžné datum odeslání:
              7 pracovních dnů
              Konfigurovat
            • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                MISUMI

                Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                Více informací
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                0.3 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                Běžné datum odeslání:
                8 pracovních dnů
                Konfigurovat
              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                  MISUMI

                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                  [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                  Více informací
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                  Běžné datum odeslání:
                  7 pracovních dnů
                  Konfigurovat
                • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                    MISUMI

                    Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                    [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.
                    Více informací
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                    Běžné datum odeslání:
                    8 pracovních dnů
                    Konfigurovat
                  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                      MISUMI

                      Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                      [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                      Více informací
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                      Běžné datum odeslání:
                      7 pracovních dnů
                      Konfigurovat
                    • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                        MISUMI

                        Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                        [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                        Více informací
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                        Běžné datum odeslání:
                        8 pracovních dnů
                        Konfigurovat
                      • Spiral Reamer with Carbide Bottom Blade
                        • Volume Discount

                        MISUMI

                        Spiral Reamer with Carbide Bottom Blade

                        [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral grooves
                        Více informací
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]20 ~ 30N/ASpiralAvailable--
                        Cena (bez DPH) od:
                        86.03 €
                        Běžné datum odeslání:
                        5 pracovních dnů
                        Konfigurovat
                      • Carbide Straight Reamer, Regular Model

                          MISUMI

                          Carbide Straight Reamer, Regular Model

                          [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
                          Více informací
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
                          Běžné datum odeslání:
                          7 pracovních dnů
                          Konfigurovat
                        • Carbide Straight Reamer, Long Model

                            MISUMI

                            Carbide Straight Reamer, Long Model

                            [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                            Více informací
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                            Běžné datum odeslání:
                            8 pracovních dnů
                            Konfigurovat
                          • Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
                            • Volume Discount

                            MISUMI

                            Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

                            [Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).
                            Více informací
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            1 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 40N/AStraightN/A--
                            Cena (bez DPH) od:
                            37.11 €
                            Běžné datum odeslání:
                            5 pracovních dnů
                            Konfigurovat
                          • Carbide Precision Straight Reamer

                              MISUMI

                              Carbide Precision Straight Reamer

                              It is capable of finishing holes with clean surface roughness compared to the normal reamer.
                              Více informací
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.5 ~ 5.9End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 10N/AStraightN/A--
                              Běžné datum odeslání:
                              8 pracovních dnů
                              Konfigurovat
                            • Carbide Pilot Hole Correction Boring Bit

                                MISUMI

                                Carbide Pilot Hole Correction Boring Bit

                                In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
                                Více informací
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                1.8 ~ 5End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
                                Běžné datum odeslání:
                                8 pracovních dnů
                                Konfigurovat
                              • Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                  MISUMI

                                  Carbide Step Reamer, Custom Dimensions / Long Shank Type

                                  [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                                  Více informací
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                                  Běžné datum odeslání:
                                  7 pracovních dnů
                                  Konfigurovat
                                • Reamer with Carbide Oil Hole for Stop Holes CSOER

                                    EIKOSHA

                                    Reamer with Carbide Oil Hole for Stop Holes CSOER

                                    Bottom blade with blind hole reamer Oil hole right twist
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    2.95 ~ 16Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30N/ASpiralAvailable--
                                    Cena (bez DPH) od:
                                    120.41 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Solid Medium Reamer CSRM
                                    • Volume Discount

                                    EIKOSHA

                                    Solid Medium Reamer CSRM

                                    For General-Purpose Wear resistant Carbide K Type Adopted
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.8 ~ 12.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 80N/AStraightN/A--
                                    Cena (bez DPH) od:
                                    65.16 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Carbide Chucking Reamer CSCRS
                                    • Volume Discount

                                    EIKOSHA

                                    Carbide Chucking Reamer CSCRS

                                    For General-Purpose Short blade, long shank, for deep hole finishing
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    1 ~ 30Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 75N/AStraightN/A--
                                    Cena (bez DPH) od:
                                    83.18 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Solid Taper Pin Reamer CSTPR
                                    • Volume Discount

                                    EIKOSHA

                                    Solid Taper Pin Reamer CSTPR

                                    For 1/50 Taper Pins
                                    Více informací
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
                                    Cena (bez DPH) od:
                                    62.64 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Solid Pin Gate Reamer CSPGR

                                      EIKOSHA

                                      Solid Pin Gate Reamer CSPGR

                                      Sprue Hole Drilling Reamer for Pin-Gate Mold
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]25 ~ 60N/ASpiralN/A-1.42 ~ 9.01
                                      Cena (bez DPH) od:
                                      107.23 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • Carbide Reamer B Series
                                      • Volume Discount

                                      FPTOOLS

                                      Carbide Reamer B Series

                                      [Features] It is possible to drill holes of general steel highly polished, and it is possible to drill without subsequent pilot hole.
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      0.9 ~ 14Straight ShankGeneral Steel[○] / Resin[○] / Alloy Steel[○]20 ~ 70N/AStraightN/A--
                                      Cena (bez DPH) od:
                                      47.59 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • Carbide Reamer C Series
                                      • Volume Discount

                                      FPTOOLS

                                      Carbide Reamer C Series

                                      [Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      2.91 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 25N/AStraightN/A--
                                      Cena (bez DPH) od:
                                      43.46 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat
                                    • BCCR Carbide Chucking Reamer (Straight Shank)
                                      • Volume Discount

                                      OKAZAKI SEIKO

                                      BCCR Carbide Chucking Reamer (Straight Shank)

                                      Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                                      Více informací
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                                      Cena (bez DPH) od:
                                      126.32 €
                                      Běžné datum odeslání:
                                      10 pracovních dnů
                                      Konfigurovat
                                    • BCER Reamer with Carbide Teeth (Straight Shank)

                                        OKAZAKI SEIKO

                                        BCER Reamer with Carbide Teeth (Straight Shank)

                                        Tip brazing type, straight shank specification. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                        Více informací
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/ASpiralAvailable--
                                        Cena (bez DPH) od:
                                        139.11 €
                                        Běžné datum odeslání:
                                        10 pracovních dnů
                                        Konfigurovat
                                      • BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                                          OKAZAKI SEIKO

                                          BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                                          Tip brazing type, Morse taper shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                                          Více informací
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          12.5 ~ 30Morse Taper ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                                          Cena (bez DPH) od:
                                          139.11 €
                                          Běžné datum odeslání:
                                          10 pracovních dnů
                                          Konfigurovat
                                        • BCHR Carbide Helical Reamer (Straight Shank)

                                            OKAZAKI SEIKO

                                            BCHR Carbide Helical Reamer (Straight Shank)

                                            Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling. The shape is left-torsion to provide excellent stability for machining of holes with notches (key grooves, etc.).
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AHelicalN/A--
                                            Cena (bez DPH) od:
                                            126.32 €
                                            Běžné datum odeslání:
                                            8 pracovních dnů
                                            Konfigurovat
                                          • CCRM Carbide Chucking Reamer (Hundredths Range)
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CCRM Carbide Chucking Reamer (Hundredths Range)

                                            A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                                            Více informací
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            2.95 ~ 12.05Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                                            Cena (bez DPH) od:
                                            38.47 €
                                            Běžné datum odeslání:
                                            10 pracovních dnů
                                            Konfigurovat
                                          • With Carbide Teeth (and with Oil Hole)

                                              OKAZAKI SEIKO

                                              With Carbide Teeth (and with Oil Hole)

                                              A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                                              Více informací
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              5 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                                              Cena (bez DPH) od:
                                              117.80 €
                                              Běžné datum odeslání:
                                              10 pracovních dnů
                                              Konfigurovat
                                            • CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                                OKAZAKI SEIKO

                                                CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                                A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                                                Více informací
                                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                4.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                                                Cena (bez DPH) od:
                                                136.98 €
                                                Běžné datum odeslání:
                                                10 pracovních dnů
                                                Konfigurovat
                                              • CERM Reamer with Carbide Teeth (Hundredths Range)

                                                  OKAZAKI SEIKO

                                                  CERM Reamer with Carbide Teeth (Hundredths Range)

                                                  A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                                  Více informací
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                                                  Cena (bez DPH) od:
                                                  100.75 €
                                                  Běžné datum odeslání:
                                                  10 pracovních dnů
                                                  Konfigurovat
                                                • CERS Short Reamer with Carbide Teeth
                                                  • Volume Discount

                                                  OKAZAKI SEIKO

                                                  CERS Short Reamer with Carbide Teeth

                                                  A solid type. Carbide end blade reamer (CER/CERM) short type.
                                                  Více informací
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  3 ~ 6End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]6 ~ 12N/ASpiralAvailable--
                                                  Cena (bez DPH) od:
                                                  30.79 €
                                                  Běžné datum odeslání:
                                                  8 pracovních dnů
                                                  Konfigurovat
                                                • CHRS Short Carbide Helical Reamer
                                                  • Volume Discount

                                                  OKAZAKI SEIKO

                                                  CHRS Short Carbide Helical Reamer

                                                  A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                                                  Více informací
                                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                                  10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]35N/AHelicalN/A--
                                                  Cena (bez DPH) od:
                                                  118.78 €
                                                  Běžné datum odeslání:
                                                  10 pracovních dnů
                                                  Konfigurovat