Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Tool Diameter(mm)
    [1.8–5/0.1mm jednotek]
    [0.3–15.99/0.01mm jednotek]
    [0.3–15.995/0.005mm jednotek]
  • Groove Length(mm)
    [0.5–48/0.5mm jednotek]
    [3–10/1mm jednotek]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
    • Carbide Chucking Reamer CCRFM (OK Tough Coat)
      • Volume Discount

      OKAZAKI SEIKO

      Carbide Chucking Reamer CCRFM (OK Tough Coat)

      [Features]・ OK Tough Coat realizes high speed machining and long life・ Solid type・ Capable of deep hole machining thanks to a neck diameter thinner than the blade diameter
      Více informací
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      2.95 ~ 2.96End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31AvailableStraightN/A--
      Cena (bez DPH) od:
      50.67 €
      Běžné datum odeslání:
      10 pracovních dnů
      Konfigurovat
    • Carbide Reamer with End Blade CERFM (OK Tough Coat)

        OKAZAKI SEIKO

        Carbide Reamer with End Blade CERFM (OK Tough Coat)

        [Features]・ OK Tough Coat realizes high speed machining and long life・ Solid type・ Reamer for complete blind holes, capable of cleanly machining bottom surfaces.・ Adopts an end mill shank
        Více informací
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.95 ~ 2.96End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31AvailableSpiralAvailable--
        Cena (bez DPH) od:
        122.77 €
        Běžné datum odeslání:
        10 pracovních dnů
        Konfigurovat
      • Carbide Hard Reamer CKRH / CKRHM
        • Volume Discount

        OKAZAKI SEIKO

        Carbide Hard Reamer CKRH / CKRHM

        [Features]・ OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.・Can be used to machine high-hardness materials of up to HRC62.
        Více informací
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2.95 ~ 12End Mill ShankGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] / Die Steel[○] / Alloy Steel[○]-AvailableSpiralN/A--
        Cena (bez DPH) od:
        78.12 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Carbide Powerful Reamer CPRFM (OK Tough Coat)

          OKAZAKI SEIKO

          Carbide Powerful Reamer CPRFM (OK Tough Coat)

          [Features]・OKTough Coat realizes high speed machining and long life・ Solid type・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip ・ Torsion angle 45°
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2.95 ~ 2.96End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31AvailableSpiralN/A--
          Cena (bez DPH) od:
          102.52 €
          Běžné datum odeslání:
          10 pracovních dnů
          Konfigurovat
        • Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
          • Volume Discount

          OKAZAKI SEIKO

          Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)

          [Features]・OKTough Coat realizes high speed machining and long life・ Solid type・ The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip・ Torsion angle 35°
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2.95 ~ 2.96End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎]30AvailableSpiralN/A--
          Cena (bez DPH) od:
          50.67 €
          Běžné datum odeslání:
          10 pracovních dnů
          Konfigurovat
        • Carbide Short Reamer CSRFM (OK Tough Coat)
          • Volume Discount

          OKAZAKI SEIKO

          Carbide Short Reamer CSRFM (OK Tough Coat)

          [Features]・ OK Tough Coat realizes high speed machining and long life・ Solid type
          Více informací
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2.95 ~ 2.96End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎]27 ~ 30AvailableStraightN/A--
          Cena (bez DPH) od:
          53.72 €
          Běžné datum odeslání:
          10 pracovních dnů
          Konfigurovat
        • Carbide Reamer R Series with Oil Hole CR-H

            FPTOOLS

            Carbide Reamer R Series with Oil Hole CR-H

            [Features]· By adding an oil hole, the influence of heat during machining can be suppressed and the abrasion resistance is improved.· The short product length improves tool rigidity and enables even higher-precision machining.· As with the R Series, it is capable of machining everything from difficult-to-cut materials such as stainless steel to high hardness steel.· Blade diameter tolerance of +0.005/0 is adopted.· By injecting cutting oil from the oil hole provided in the blade groove and applying it directly to the blade tip, the influence of heat during machining can be suppressed.
            Více informací
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            4.97 ~ 10.03-Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[◎]20 ~ 30AvailableSpiralN/A--
            Cena (bez DPH) od:
            98.02 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • SANDVIK Cylindrical Shank to CoroReamer 830 Adaptor

              SANDVIK

              SANDVIK Cylindrical Shank to CoroReamer 830 Adaptor

              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              10.00 - 21.00 ~ 30.00 - 31.75--------
              Cena (bez DPH) od:
              919.31 €
              Běžné datum odeslání:
              5 pracovních dnů
              Konfigurovat
            • SANDVIK CoroReamer 835 Solid Carbide Reamer

                SANDVIK

                SANDVIK CoroReamer 835 Solid Carbide Reamer

                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3.97 ~ 20-General Steel[○] / Stainless Steel[○] / Cast Iron[○]12 ~ 25-----
                Cena (bez DPH) od:
                142.15 €
                Běžné datum odeslání:
                5 pracovních dnů
                Konfigurovat