Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Tip angle (θ)
    [60–160/1]
  • Tool Diameter (D)(mm)
  • R Size (R)(mm)
  • CAD
  • Chamfer, V-Grooves

      • Back Seat Mini Chamfer (90° Blade)

          NOGAJAPAN

          Back Seat Mini Chamfer (90° Blade)

          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          -901.5 ~ 6-----TiAlN
          Cena (bez DPH) od:
          92.56 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • SANDVIK CoroMill 326 Solid Carbide End Mill for Chamfer Milling

            SANDVIK

            SANDVIK CoroMill 326 Solid Carbide End Mill for Chamfer Milling

            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            --6 ~ 8------
            Cena (bez DPH) od:
            58.52 €
            Běžné datum odeslání:
            5 pracovních dnů
            Konfigurovat
          • Chamfering Drill
            • Volume Discount

            NT TOOL

            Chamfering Drill

            For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy Positioning
            Více informací
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer9010 ~ 25Aluminum[○] / Copper[○]Single blade / Double-edgedN/AHigh-speed steelN/A-
            Cena (bez DPH) od:
            22.16 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Back Seat Mini Chamfer (120° Blade)

              NOGAJAPAN

              Back Seat Mini Chamfer (120° Blade)

              [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 2 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              -1202 ~ 5-----TiAlN
              Cena (bez DPH) od:
              92.56 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Chamfering / Deburring Tool (for 1 to 3 mm Wide Inner Diameter O-Ring Grooves)
              • Volume Discount

              NOGAJAPAN

              Chamfering / Deburring Tool (for 1 to 3 mm Wide Inner Diameter O-Ring Grooves)

              [Features]· Deburring tool for the inside diameter of O-ring grooves with a 1 to 3 mm width and a depth of up to 20 mm.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Other--------
              Cena (bez DPH) od:
              23.65 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Chamfer / Deburring Tool
              • Volume Discount

              NOGAJAPAN

              Chamfer / Deburring Tool

              [Features]· Easily deburrs the end surface after cutting threads.· It is the most efficient and easy tool to remove burrs from the outer part of round bars and pipes of size φ4 to 18 mm.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Other--------
              Cena (bez DPH) od:
              29.88 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Chamfer / Deburring Tool
              • Volume Discount

              NOGAJAPAN

              Chamfer / Deburring Tool

              [Features]· This is used for producing clearance at the corner.· A tool for marking.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Other--------
              Cena (bez DPH) od:
              29.26 €
              Běžné datum odeslání:
              10 pracovních dnů
              Konfigurovat
            • 3-Flute, Chamfering Cutter (Negative Type) HSCT-N
              • Volume Discount

              OSG

              3-Flute, Chamfering Cutter (Negative Type) HSCT-N

              End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/ANon-Coated
              Cena (bez DPH) od:
              73.17 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Corner Rounding End Mill
              • Volume Discount

              FUKUDA

              Corner Rounding End Mill

              Round chamfering end mill.
              Více informací
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Round Chamfer--General Steel[○] / Cast Iron[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
              Cena (bez DPH) od:
              97.85 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Toglon Sharp SP 90° Carbide DLC Coating

                IWATA TOOL

                Toglon Sharp SP 90° Carbide DLC Coating

                [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.
                Více informací
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901.2 ~ 16Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/ACarbideAvailableDLC
                Cena (bez DPH) od:
                100.97 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Milling Cutter for 120° Chamfering Type N 6714
                • Volume Discount

                GUHRING

                Milling Cutter for 120° Chamfering Type N 6714

                Taper half-angle 60° chamfering milling cutter.
                Více informací
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                -1204 ~ 12---CarbideAvailableTiAlN
                Cena (bez DPH) od:
                52.55 €
                Běžné datum odeslání:
                6 pracovních dnů
                Konfigurovat
              • Milling Cutter for 60° Chamfering Type N 6711

                  GUHRING

                  Milling Cutter for 60° Chamfering Type N 6711

                  Taper half-angle 30° chamfering milling cutter.
                  Více informací
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  -604 ~ 12---CarbideAvailableTiAlN
                  Cena (bez DPH) od:
                  48.49 €
                  Běžné datum odeslání:
                  6 pracovních dnů
                  Konfigurovat
                • Milling Cutter for 90° Chamfering Type N 6713

                    GUHRING

                    Milling Cutter for 90° Chamfering Type N 6713

                    Taper half-angle 45° chamfering milling cutter.
                    Více informací
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    -904 ~ 12---CarbideAvailableTiAlN
                    Cena (bez DPH) od:
                    49.97 €
                    Běžné datum odeslání:
                    6 pracovních dnů
                    Konfigurovat
                  • Mini Corner Round Cutter MCRC (SKH56)

                      TAIYO-TOOL

                      Mini Corner Round Cutter MCRC (SKH56)

                      [Applications]· Round chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] N[Coating Type] Non-Coated[Flute No.] 1-Flute
                      Více informací
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Round Chamfer-2.6 ~ 23-Single blade-High-speed steelN/ANon-Coated
                      Cena (bez DPH) od:
                      94.85 €
                      Běžné datum odeslání:
                      6 pracovních dnů
                      Konfigurovat
                    • CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                        SANDVIK

                        CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Chamfering/Horizontal90°8 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableOther
                        Cena (bez DPH) od:
                        116.87 €
                        Běžné datum odeslání:
                        6 pracovních dnů
                        Konfigurovat
                      • Mini Chamfer (30° Blade) for Oblique Cross Holes

                          NOGAJAPAN

                          Mini Chamfer (30° Blade) for Oblique Cross Holes

                          [Features]· For deburring and chamfering of diagonal cross-holes, etc.· The angle of the blade is 150 degrees and the cutting edge is long and wide, so it is effective for deburring oblique cross holes, etc.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· This is a mini chamfer that chamfers and deburrs by milling the burrs on cross holes / diagonal cross holes.
                          Více informací
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          -303 ~ 8-----TiAlN
                          Cena (bez DPH) od:
                          92.56 €
                          Běžné datum odeslání:
                          6 pracovních dnů
                          Konfigurovat
                        • Back Seat Mini Chamfer (Long Reach 90° Blade)

                            NOGAJAPAN

                            Back Seat Mini Chamfer (Long Reach 90° Blade)

                            [Features]· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).· Ideal for machining.· Spiral blade provides smooth sharpness.· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.
                            Více informací
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            -903 ~ 12-----TiAlN
                            Cena (bez DPH) od:
                            92.56 €
                            Běžné datum odeslání:
                            6 pracovních dnů
                            Konfigurovat
                          • Back Seat Mini Chamfer (Dovetail 45° Blade)

                              NOGAJAPAN

                              Back Seat Mini Chamfer (Dovetail 45° Blade)

                              [Features]· Mini chamfer consisting only of back chamfer blade.· Ideal for chamfering undersides of shallow bases.[Applications]· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.· A mini chamfer that can chamfer and deburr by back milling drill holes.
                              Více informací
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              -451.5 ~ 6-----TiAlN
                              Cena (bez DPH) od:
                              92.56 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • Chamfering / Deburring Tool (for Making Clearance for Slots Over 3.5 mm)
                              • Volume Discount

                              NOGAJAPAN

                              Chamfering / Deburring Tool (for Making Clearance for Slots Over 3.5 mm)

                              [Features]· Used to create corner relief in narrow slots of 3.5 mm or more.
                              Více informací
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Other--------
                              Cena (bez DPH) od:
                              30.92 €
                              Běžné datum odeslání:
                              6 pracovních dnů
                              Konfigurovat
                            • SANDVIK CoroMill 326 Solid Carbide End Mill for Thread Milling

                                SANDVIK

                                SANDVIK CoroMill 326 Solid Carbide End Mill for Thread Milling

                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                --6.35 ~ 7.92------
                                Cena (bez DPH) od:
                                62.77 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide chamfer, V grooving end mill, 2-flute
                                • Volume Discount
                                • TS
                                • General Steel
                                • 2 Flutes

                                MISUMI

                                TS coated carbide chamfer, V grooving end mill, 2-flute

                                [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove60 ~ 1203 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                Cena (bez DPH) od:
                                68.82 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
                                • Volume Discount
                                • TS
                                • General Steel
                                • 2 Flutes

                                MISUMI

                                TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

                                Ideal for the Deep Chamfering of Workpieces
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                Cena (bez DPH) od:
                                48.89 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide chamfering end mill, 2-flute / 15° spiral
                                • Volume Discount
                                • TS
                                • General Steel
                                • 2 Flutes

                                MISUMI

                                TS coated carbide chamfering end mill, 2-flute / 15° spiral

                                [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                Cena (bez DPH) od:
                                40.79 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide chamfering end mill, 2-flute / short model
                                • Volume Discount
                                • TS
                                • General Steel
                                • 2 Flutes
                                • S (Short)

                                MISUMI

                                TS coated carbide chamfering end mill, 2-flute / short model

                                [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 1203 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                Cena (bez DPH) od:
                                38.81 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide chamfering end mill, 3-flute / short model
                                • Volume Discount
                                • TS
                                • General Steel
                                • 3 Flutes
                                • S (Short)

                                MISUMI

                                TS coated carbide chamfering end mill, 3-flute / short model

                                [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                                Cena (bez DPH) od:
                                46.59 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS coated carbide inner R-cutter, 2-flute
                                • Volume Discount
                                • TS
                                • General Steel
                                • 2 Flutes

                                MISUMI

                                TS coated carbide inner R-cutter, 2-flute

                                [Features] Easy high-quality machining of corner radii-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Round Chamfer--General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                Cena (bez DPH) od:
                                48.10 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • Carbide inner R-cutter, 2-flute
                                • Volume Discount
                                • Non-Coated
                                • General Steel
                                • 2 Flutes

                                MISUMI

                                Carbide inner R-cutter, 2-flute

                                Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideN/A-
                                Cena (bez DPH) od:
                                47.50 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
                                • Volume Discount
                                • TS
                                • SUS
                                • 2 Flutes

                                MISUMI

                                TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

                                The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                                Cena (bez DPH) od:
                                77.83 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • Carbide Chamfering End Mill for Aluminium Machining, 2-Flute, 30° Spiral
                                • Volume Discount
                                • Non-Coated
                                • Aluminum
                                • 2 Flutes

                                MISUMI

                                Carbide Chamfering End Mill for Aluminium Machining, 2-Flute, 30° Spiral

                                Capable of everything from positioning to chamfering in a single shot
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
                                Cena (bez DPH) od:
                                40.79 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • Carbide Chamfering End Mill for Aluminium Machining, 2-Flute
                                • Volume Discount
                                • Non-Coated
                                • Aluminum
                                • 2 Flutes

                                MISUMI

                                Carbide Chamfering End Mill for Aluminium Machining, 2-Flute

                                The sharp helix blade achieves the clean machined surface with less burr
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A-
                                Cena (bez DPH) od:
                                75.63 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
                                • Volume Discount
                                • TiCN
                                • 2 Flutes
                                • S (Short)

                                MISUMI

                                TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

                                The chamfer angle can be selected from 60, 90 and 120°according to the machining style
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 12010 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailable-
                                Cena (bez DPH) od:
                                55.66 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • High-Speed Steel Chamfering End Mill, 2-Flute / Short
                                • Non-Coated
                                • 2 Flutes
                                • S (Short)

                                MISUMI

                                High-Speed Steel Chamfering End Mill, 2-Flute / Short

                                Chamfering end mill with the angle that can be freely selected in 1° increments
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal60 ~ 16010 ~ 25General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSSAvailable / N/ATiCN
                                Běžné datum odeslání:
                                7 pracovních dnů
                                Konfigurovat
                              • XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
                                • Volume Discount

                                MISUMI

                                XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

                                [Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Round Chamfer--General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]Single bladeN/ACarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                71.31 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

                                [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                41.90 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

                                [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                34.92 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

                                [Features]・Machining from positioning to chamfering with a single tool.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                41.67 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Chamfer End Mill 2-Flute
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Chamfer End Mill 2-Flute

                                [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                32.62 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

                                [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove--General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                43.97 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XAL Series Carbide Inner Radius Cutter, 2-Flute
                                • Volume Discount

                                MISUMI

                                XAL Series Carbide Inner Radius Cutter, 2-Flute

                                [Features]・An essential item for corner rounding.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                ---General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                                Cena (bez DPH) od:
                                48.10 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
                                • Volume Discount

                                MISUMI

                                XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

                                [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal--General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]Single bladeN/ACarbideAvailableTS
                                Cena (bez DPH) od:
                                42.86 €
                                Běžné datum odeslání:
                                5 pracovních dnů
                                Konfigurovat
                              • Leading Drills, TIN-NC-LDS
                                • Volume Discount

                                OSG

                                Leading Drills, TIN-NC-LDS

                                TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS
                                Více informací
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Centering (Positioning) / Hole Chamfer60 ~ 1203 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]Single bladeN/AHigh-speed steelAvailableTiN
                                Cena (bez DPH) od:
                                21.10 €
                                Běžné datum odeslání:
                                6 pracovních dnů
                                Konfigurovat
                              • Leading Drills, VP-LDS

                                  OSG

                                  Leading Drills, VP-LDS

                                  V coating enables longer lasting life than TIN-NC-LDS
                                  Více informací
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Centering (Positioning) / Hole Chamfer903 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]Single bladeN/APowder high-speed steelAvailableTiCN
                                  Cena (bez DPH) od:
                                  17.24 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • Leading Drills, NC-LDS
                                  • Volume Discount

                                  OSG

                                  Leading Drills, NC-LDS

                                  Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).
                                  Více informací
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Centering (Positioning) / Hole Chamfer90 ~ 1303 ~ 25General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/AHigh-speed steelN/ANon-Coated
                                  Cena (bez DPH) od:
                                  12.20 €
                                  Běžné datum odeslání:
                                  6 pracovních dnů
                                  Konfigurovat
                                • Leading Drills, FX-LS-LDS

                                    OSG

                                    Leading Drills, FX-LS-LDS

                                    90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.
                                    Více informací
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Centering (Positioning) / Hole Chamfer9016 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableTiAlN
                                    Cena (bez DPH) od:
                                    295.75 €
                                    Běžné datum odeslání:
                                    6 pracovních dnů
                                    Konfigurovat
                                  • Leading Drills, FX-LDS

                                      OSG

                                      Leading Drills, FX-LDS

                                      90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.
                                      Více informací
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Centering (Positioning) / Hole Chamfer9016 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableTiAlN
                                      Cena (bez DPH) od:
                                      357.80 €
                                      Běžné datum odeslání:
                                      6 pracovních dnů
                                      Konfigurovat