Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
TRUSCO NAKAYAMA
Chamfering cutter, "Nice Men G" (titanium-coated)【1 až 3 kusů】
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal | 90 | - | Aluminum[○] | Single blade | N/A | High-speed steel | Available | TiN |
NAKAJIMAKOUKI
Center Drill, Okabe Standard, Type 1, G Coating 60°
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 60 | 0.3 ~ 10 | Aluminum[○] | Double-edged | N/A | High-speed steel | Available | TiN |
NAKAJIMAKOUKI
Center Drill, Okabe Standard, Type 1, Carbide 60°
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 60 | 0.3 ~ 6 | Aluminum[◎] | Single blade / Double-edged | N/A | Carbide | N/A | Non-Coated |
NAKAJIMAKOUKI
Center Drill, Okabe Standard, Type 1, Carbide 90°
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 90 | 0.3 ~ 6 | Aluminum[◎] | Double-edged | N/A | Carbide | N/A | Non-Coated |
BIG KAISER
Throw-Away Tip for C-Cutter Boy
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Chamfering/Horizontal | 45 | - | Aluminum[○] | - | - | Carbide | Available | Other |
BIG KAISER
R-Cutter Front / Back Round Chamfer
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Chamfering/Horizontal / Round Chamfer | 45° | - | Aluminum[○] | - | N/A | - | - | - |
OKAZAKI SEIKO
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 66 | Aluminum[○] | Single blade | N/A | Cobalt HSS | Available | TiN |
OKAZAKI SEIKO
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 20 | Aluminum[○] | Single blade | N/A | Cobalt HSS | Available | TiN |
OKAZAKI SEIKO
SVM Chamfering Mill, Non-Coated
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal / V Groove | 90 ~ 120 | 3 ~ 20 | Aluminum[○] | Single blade | Available | Carbide | N/A | Non-Coated |
OKAZAKI SEIKO
SVMA Chamfering Mill, OK Coated
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal / V Groove | 90 ~ 120 | 3 ~ 20 | Aluminum[○] | Single blade | Available | Carbide | Available | TiAlN |
DIJET
Solid V Point Mill VSE VSESS Type
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Chamfering/Horizontal / V Groove / Drilling / Other | 60 ~ 90 | 5 ~ 12 | Aluminum[○] | Single blade | - | Carbide | N/A | Non-Coated |
DIJET
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Chamfering/Horizontal | 90 | 4 | Aluminum[◎] | Single blade | - | Carbide | N/A | Non-Coated |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 120 | 5 ~ 20 | Aluminum[○] | Single blade | - | Carbide | N/A | - |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 120 | 10 | Aluminum[○] | Single blade | - | High-speed steel | Available | Other |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 120 | 5 ~ 20 | Aluminum[○] | Single blade | - | Carbide | Available | Other |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 90 | 12.7 | Aluminum[○] | Single blade | - | High-speed steel | Available | Other |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 90 | 5 ~ 20 | Aluminum[○] | Single blade | - | Carbide | Available | Other |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 90 | 3 ~ 20 | Aluminum[○] | Single blade | - | Cobalt HSS | N/A | - |
GUHRING
NC Spotting Drill Long Shank 90° 559
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 90 | 15.87 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Straight Shank, Countersink 3-Flute 60° 472
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 60 | 6.3 ~ 25 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Straight Shank, Countersink 3-Flute 90° 1326
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 4.3 ~ 31 | Aluminum[○] | Single blade | - | High-speed steel | Available | TiAlN |
GUHRING
Straight Shank, Countersink 3-Flute 90° 327
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 5 ~ 31 | Aluminum[○] | Single blade | - | High-speed steel | Available | TiN |
GUHRING
Straight Shank, Countersink 3-Flute 90° 476
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 4.3 ~ 31 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | 90 | 6.30/8.30/10.40/12.40/16.50/20.50 | Aluminum[○] | Single blade | - | High-speed steel | Available | TiN |
GUHRING
Straight Shank, Countersink 3-Flute, 90° (Set of 476) 498
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
- | 90 | 6.30/8.30/10.40/12.40/16.50/20.50 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Straight Shank, Countersink, Multi Blade 90° 474
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 8 ~ 20 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Tapered Shank Countersink, 3-Flute 60° 473
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 60 | 16 ~ 80 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Tapered Shank Countersink, 3-Flute 90° 328
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 25 ~ 50 | Aluminum[○] | Single blade | - | High-speed steel | Available | TiN |
GUHRING
Tapered Shank Countersink, 3-Flute 90° 477
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 15 ~ 100 | Aluminum[○] | Single blade | - | High-speed steel | N/A | - |
GUHRING
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | - | - | Aluminum[○] | Single blade | - | Carbide | N/A | - |
NT TOOL
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 90 | 10 ~ 25 | Aluminum[○] | Single blade / Double-edged | N/A | High-speed steel | N/A | - |
YAMAWA MFG
NC Starting Drill for Chamfering (90°) NC-SD-V
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | 90 | 5 | Aluminum[○] | Single blade | Available | High-speed steel | Available | - |
YAMAWA MFG
TICN Coated Point Drill PE - 90° PE - Q - V
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer | 125° | 6 ~ 16 | Aluminum[○] | Double-edged | N/A | High-speed steel | Available | TiCN |
YAMAWA MFG
Counter Sink (For Drilling Machine 90°, 60°) CS-QM
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | 60 | - | Aluminum[○] | Single blade | Available | High-speed steel | Available | - |
EIKOSHA
Chamfering Cutter (for Spool Bushing) RC
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Round Chamfer | - | - | Aluminum[○] | - | - | Cobalt HSS | N/A | - |
EIKOSHA
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) / Hole Chamfer / Drilling | 90 ~ 135 | 3 ~ 25 | Aluminum[○] | - | - | Cobalt HSS | Available | TiN |
EIKOSHA
Center Milling (Tapered Shank) CFT
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 60 ~ 90 | 40 ~ 100 | Aluminum[○] | - | - | High-speed steel | N/A | - |
EIKOSHA
Mini Corner R Cutter (Half) MCRC
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal / Round Chamfer | - | 3 ~ 19 | Aluminum[○] | - | - | Cobalt HSS | N/A | - |
EIKOSHA
Carbide Corner Radius Cutter CCRC
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal / Round Chamfer | - | - | Aluminum[○] | - | - | Carbide | N/A | - |
EIKOSHA
Carbide Mini Corner R Cutter CMCRC
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer / Chamfering/Horizontal / Round Chamfer | - | - | Aluminum[○] | - | - | Carbide | N/A | - |
EIKOSHA
Umbrella-Type Cutter w/ Handle PCS
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Hole Chamfer | 60 ~ 90 | 65 ~ 100 | Aluminum[○] | - | - | Cobalt HSS | N/A | - |
KYOWA SEIKO
Carbide Center Drill TiAℓ N KCDA-60
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 120° | 0.3 ~ 3 | Aluminum[○] | Double-edged | - | Carbide | Available | TiAlN |
KYOWA SEIKO
Carbide Center Drill TiAℓ N KCDA-90
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 120° | 0.3 ~ 3 | Aluminum[○] | Double-edged | - | Carbide | Available | TiAlN |
KYOWA SEIKO
Carbide Center Drill Noncoat KCD-60
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 120° | 0.3 ~ 3 | Aluminum[○] | Double-edged | - | Carbide | N/A | - |
KYOWA SEIKO
Carbide Center Drill Noncoat KCD-90
Application | Tip angle (θ) | Tool Diameter (D)(mm) | work material | Single blade, two blades | Peripheral Blade Y/N | Tool Material Type | Coating Y/N | Coating Type |
---|---|---|---|---|---|---|---|---|
Centering (Positioning) | 120° | 0.3 ~ 3 | Aluminum[○] | Double-edged | - | Carbide | N/A | - |