Tooling（Page 5）

Search by sub-category

734

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Mini Cool

NOGAJAPAN

[Features]
· Noga MiniCool applies the Venturi principle to easily spray cutting fluid in air-spray form whenever compressed air is available.
· Plug the siphon line into the cooling liquid container with the air hose as the air source, then fix the main body to the machine with the magnet before pressing the nozzle against the tool.
· Pulling the knob and opening the valve causes a strong rush of coolant fluid mist to be sprayed.
· The air volume can be adjusted with the control valve, and the amount of coolant sprayed can be adjusted with the nozzle

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Permanent Magnet

NOGAJAPAN

[Features]
An optional part for Minicool.
Compatible main body: MINICOOL
-Tensile force: 28 kgf
Trusco Code: 837-9810

Select to compare

Configure now
Starting from^∗ ：	54.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Data One Collet Holder E Type Spacer EA Type

MST CORPORATION

Optional Coolant-Through System Spacer

Select to compare

Configure now
Starting from^∗ ：	42.67 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Sandvik Face Mill Holder

SANDVIK

[Features]
· A basic holder for face mill holder.
· Can mount an arbor cutter.

Select to compare

Configure now
Starting from^∗ ：	146.64 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pull Wrench

MANYO TOOLS

[Features]
· Easy and certain pull bolt removal and refitting.
· Wrench does not slip when tightening and removing pull bolts, enabling reliable attachment and detachment.
· Does not fall off even when the wrench is released.
· The tip does not distort thanks to the heat treatment.

Select to compare

Configure now
Starting from^∗ ：	116.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Edge Finder [Single End]

ESCO

【Product Specifications】
・Used for work positioning attaching to the chuck at milling.
・Use the point head of -2 for center point positioning.
・Specification…Single end
・Shank x Measurement…Dia. 10mm x Dia. 6mm

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	113.99 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Coolant Hose Kit EA991EA-4

ESCO

【Product Specifications】
・Material-Acetal resin
・Application-For coolant of metal processing machines
・Angle, length, and diameter can be freely arranged by part combination.
・Chemical, shock, and heat resistant
・Connec-tionDia.…1/2
・Connector(1 pc each)…EK-3, -4
・Nozzle(1 pc each)…EN-6, -9, -13
・Hose(2 pcs)…EB-4

Select to compare

Configure now
Starting from^∗ ：	37.15 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Coolant Flare Nozzle EA991ES-64

Coolant Flare Nozzle EA991ES-64【2 Pieces Per Package】

ESCO

【Product Specifications】
・Connection dia.…1/2
・Dim. (L x jaw W)…50.4 x 66.7mm

Select to compare

Configure now
Starting from^∗ ：	19.84 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

ST Shank SA-VI Type

KATO MFG

[Features]
· Short body type that can be used in most machines
· Expansion device for absorbing feed errors
· Short type ideal for use in tight work spaces

Select to compare

Configure now
Starting from^∗ ：	526.32 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

Cool Arm for High Pressure Coolant / Double Flexible

NOGAJAPAN

[Features]
· A revolutionary coolant hose that can supply coolant to parts to be cut in pinpoint at high pressure up to 1,000 Psi (70 bar).
· The arm position can be adjusted quickly and easily, enabling cutting of higher quality.
· The tip nozzle comes in three sizes.

Select to compare

Configure now
Starting from^∗ ：	298.88 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HSK Shank High-Speed Rotation Holder, Mega Micro Chuck High Rigidity Taper Type

BIG KAISER

[Features]
· Ultra small design with a nut outer diameter of ø10.
· A slim, high-speed rotation holder taking workpiece and jig interference into consideration.
· Supports ultra-small diameter end mill processing.

Select to compare

Configure now
Starting from^∗ ：	327.00 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

250 Collet chuck key

AMF

Collet chuck key for collet chuck nuts (ER) to DIN 6499.
Special steel, hardened and zinc-plated. With hole for hanging up. The product is available per 1 peace.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6368 Wrench for milling arbor screws

AMF

Wrench for milling arbor screws for tightening milling arbor screws to DIN 6367.
Special steel, hardened and blued. The product is available per 1 peace.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Weldon to CoroChuck 970

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,119.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK ISO 7388-1 to Side and Face Mill Arbor Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	159.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK ISO 7388-1 to ISO 9766 Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	162.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK ISO 7388-1 to ER Collet Chuck

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	169.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK ISO 7388-1 to CoroChuck 930

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	901.77 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Coromant Capto to Shrink Fit Chuck

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	409.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK MAS-BT 403 to Arbor Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	149.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Coromant EH to CoroChuck 970

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,571.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK MAS-BT 403 to Side and Face Mill Arbor Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	159.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK HSK to ISO 9766 Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	387.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK HSK to Weldon Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	324.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK BIG-PLUS ISO to Weldon / ISO 9766 Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	496.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK HSK to CoroChuck 930

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Digital Height Master, Inch

MITUTOYO

This is a standard model with a digital display, that offers you the following benefits:
- It gives you all the essential specifications required for a versatile height standard.
- You can use it to calibrate and set height gauges and other measuring instruments.
- Models have two measuring faces on the same level, one facing up and the other down.

Select to compare

Configure now
Starting from^∗ ：	3,730.26 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Digital Height Master

MITUTOYO

Select to compare

Configure now
Starting from^∗ ：	3,730.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Check Master

MITUTOYO

This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
- You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
- It consists of rigidly clamped gauge blocks with a step of 10 mm.
- It is supplied in a fitted wooden case.

Select to compare

Configure now
Starting from^∗ ：	3,388.16 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Zero-Point Clamping Sleeve, 6214ZN-250-03

AMF

Zero-point clamping sleeve
For pressing in.
Hardened.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	51.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insertion Tool, 6203ZMW

AMF

Insertion tool
For sizes SP140 and SP150.

Select to compare

Configure now
Starting from^∗ ：	98.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insertion Tool, 6370ZMW-5

AMF

Insertion tool
For sizes KP5 and KH5 in the screw-in version.

Select to compare

Configure now
Starting from^∗ ：	54.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Alignment Tool K02 for Timing Pull-Stud, 6203ZNA

AMF

Alignment tool K02 for timing pull-stud
Suitable for order no. 427328.

Select to compare

Configure now
Starting from^∗ ：	34.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Actuating Pin, 6214M

AMF

Actuating pin
Not hardened, for mechanical clamping modules 6214RM-250 and 6214RM-251.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insertion Tool, 6214ZM

AMF

Insertion tool
For sizes RP250/251 and RM250/251.

Select to compare

Configure now
Starting from^∗ ：	67.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Counterbalance Clamping Sleeve, 6214ZN

AMF

Counterbalance clamping sleeve
For screwing on.
Hardened.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	89.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Positioning Pull-Stud, 6370ZZ

AMF

Positioning pull-stud
Hardened.

Select to compare

Configure now
Starting from^∗ ：	139.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insertion Tool, 6425MW

AMF

Insertion tool
Special steel, hardened and blued in black oxide finish.

Select to compare

Configure now
Starting from^∗ ：	87.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AMF-Marker Medium, 1570MML

AMF

AMF Marker Medium
Marking tool suitable for 20 mm collets and Weldon holders.
552306: lower pressing force, ideally suited for aluminium in conjunction with marking needle 550479
556949: higher pressing force, ideally suited for steel and stainless steel
Marking needles are not supplied as standard.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,016.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Marking Needle, 1570MMN

AMF

Marking needle
fits AMF Marker Medium No. 1570MM.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	584.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AMF-Marker Medium, 1570MM

AMF

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	967.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Marking Needle, 1590MSLN

AMF

Marking needle
fits AMF Marker Slimline No. 1580MSL.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	584.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Marking Needle, 1580MSN

AMF

Marking needle
fits AMF Marker Small No. 1580MS.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	584.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Marking Needle, 1560MLN

AMF

Marking needle
fits AMF Marker Large No. 1560ML.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	584.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Marking Needle, 1550MXLN

AMF

Marking needle
fits AMF Marker Extra Large No. 1550MXL.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	586.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Product Category
Applicable Manufacturing Machinery (main unit)
Spindle types
HSK type
Tool Type
Retainable blade diameter(mm)
Chuck Type
Holder Length L(mm)
Maximum Allowable Rotational Speed(min-1)
Coolant System

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NOGAJAPAN	NOGAJAPAN	MST CORPORATION	SANDVIK	MANYO TOOLS	ESCO	ESCO	ESCO	KATO MFG	NOGAJAPAN	BIG KAISER	AMF	AMF	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	MITUTOYO	MITUTOYO	MITUTOYO	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF	AMF
Product Series	Mini Cool	Permanent Magnet	Data One Collet Holder E Type Spacer EA Type	Sandvik Face Mill Holder	Pull Wrench	Edge Finder [Single End]	Coolant Hose Kit EA991EA-4	Coolant Flare Nozzle EA991ES-64【2 Pieces Per Package】	ST Shank SA-VI Type	Cool Arm for High Pressure Coolant / Double Flexible	HSK Shank High-Speed Rotation Holder, Mega Micro Chuck High Rigidity Taper Type	250 Collet chuck key	6368 Wrench for milling arbor screws	SANDVIK Weldon to CoroChuck 970	SANDVIK ISO 7388-1 to Side and Face Mill Arbor Adaptor	SANDVIK ISO 7388-1 to ISO 9766 Adaptor	SANDVIK ISO 7388-1 to ER Collet Chuck	SANDVIK ISO 7388-1 to CoroChuck 930	SANDVIK Coromant Capto to Shrink Fit Chuck	SANDVIK MAS-BT 403 to Arbor Adaptor	SANDVIK Coromant EH to CoroChuck 970	SANDVIK MAS-BT 403 to Side and Face Mill Arbor Adaptor	SANDVIK HSK to ISO 9766 Adaptor	SANDVIK HSK to Weldon Adaptor	SANDVIK BIG-PLUS ISO to Weldon / ISO 9766 Adaptor	SANDVIK HSK to CoroChuck 930	Digital Height Master, Inch	Digital Height Master	Check Master	Zero-Point Clamping Sleeve, 6214ZN-250-03	Insertion Tool, 6203ZMW	Insertion Tool, 6370ZMW-5	Alignment Tool K02 for Timing Pull-Stud, 6203ZNA	Actuating Pin, 6214M	Insertion Tool, 6214ZM	Counterbalance Clamping Sleeve, 6214ZN	Positioning Pull-Stud, 6370ZZ	Insertion Tool, 6425MW	AMF-Marker Medium, 1570MML	Marking Needle, 1570MMN	AMF-Marker Medium, 1570MM	Marking Needle, 1590MSLN	Marking Needle, 1580MSN	Marking Needle, 1560MLN	Marking Needle, 1550MXLN
CAD																														2D / 3D				2D / 3D		2D / 3D			2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	220.54 € *Unit price with basic configuration	54.89 € *Unit price with basic configuration	42.67 € *Unit price with basic configuration	146.64 € *Unit price with basic configuration	116.39 € *Unit price with basic configuration	113.99 € *Unit price with basic configuration Volume Discount	37.15 € *Unit price with basic configuration	19.84 € *Unit price with basic configuration	526.32 € *Unit price with basic configuration	298.88 € *Unit price with basic configuration	327.00 € *Unit price with basic configuration	19.47 € *Unit price with basic configuration Volume Discount	20.79 € *Unit price with basic configuration Volume Discount	1,119.54 € *Unit price with basic configuration	159.31 € *Unit price with basic configuration	162.23 € *Unit price with basic configuration	169.54 € *Unit price with basic configuration	901.77 € *Unit price with basic configuration	409.23 € *Unit price with basic configuration	149.08 € *Unit price with basic configuration	1,571.15 € *Unit price with basic configuration	159.31 € *Unit price with basic configuration	387.31 € *Unit price with basic configuration	324.46 € *Unit price with basic configuration	496.92 € *Unit price with basic configuration	-	3,730.26 € *Unit price with basic configuration	3,730.26 € *Unit price with basic configuration	3,388.16 € *Unit price with basic configuration	51.16 € *Unit price with basic configuration	98.65 € *Unit price with basic configuration	54.63 € *Unit price with basic configuration	34.71 € *Unit price with basic configuration	17.64 € *Unit price with basic configuration	67.06 € *Unit price with basic configuration	89.72 € *Unit price with basic configuration	139.77 € *Unit price with basic configuration	87.69 € *Unit price with basic configuration	1,016.35 € *Unit price with basic configuration	584.23 € *Unit price with basic configuration	967.88 € *Unit price with basic configuration	584.23 € *Unit price with basic configuration	584.23 € *Unit price with basic configuration	584.23 € *Unit price with basic configuration	586.93 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	8 Days	8 Days	6 Days	9 Days	9 Days	9 Days	11 Days	7 Days	10 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	60 Days	5 Days	60 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Product Category	Heating and Cooling Equipment	Heating and Cooling Equipment	Attachments/Accessories	Attachments/Accessories	Attachments/Accessories	-	-	-	Main Body	Attachments/Accessories	Main Body	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Measuring equipment	Measuring equipment	Measuring equipment	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Applicable Manufacturing Machinery (main unit)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Spindle types	-	-	-	-	-	-	-	-	-	-	HSK-A	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
HSK type	-	-	-	-	-	-	-	-	25	-	63	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Type	-	-	-	Facemill	-	-	-	-	Tap	-	End Mill	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Retainable blade diameter(mm)	-	-	3.0〜 3.5 ～ 12.0〜13.0	-	-	-	-	-	M3～M16	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Chuck Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Holder Length L(mm)	-	-	-	-	-	-	-	-	93	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Allowable Rotational Speed(min-1)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Coolant System	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-