Micrometers（Type：Special Micrometer）

?* Information on days to ship and prices

• 

  Spline Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with a spindle and anvil reduced in diameter to enable measurement within slotted features, such as keyways. A ratchet stop guarantees repeatable measurement. High resolution provided by a vernier scale on sleeve.

  Select to compare

  Configure now
  Starting from∗ ：	243.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Stand, Adjustable Angle Type

  MITUTOYO

  These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.

  Select to compare

  Configure now
  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Crimp Height Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with pointed spindle to enable measurement of the crimp height of electrical contacts. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	301.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Caliper Jaw Micrometer

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Crimp Height Micrometer QuickMike

  MITUTOYO

  This Crimp Height Micrometer that features a flat anvil and pointed spindle offers you the following benefits:
  - It allows you to measure the crimped height of electrical contacts.
  - Excellent resistance against water and dust (IP65 protection level).

  Select to compare

  Configure now
  Starting from∗ ：	1,478.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Sheet Metal Micrometer

  MITUTOYO

  This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.

  Select to compare

  Configure now
  Starting from∗ ：	1,330.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holtest Internal Micrometer, Series 368

  MITUTOYO

  This is a set of three-point and two-point internal micrometers that offers you the following benefits:
  - Complete unit set
  - Carbide measuring surface
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - Delivered with setting rings and extension rod.

  Select to compare

  Configure now
  Starting from∗ ：	384.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Sheet Metal Micrometer Graduated Dial

  MITUTOYO

  This Sheet Metal Micrometer comes with a graduated dial.
  It offers you the following features:
  - A deep frame that enables you to measure the thickness of sheet material.
  - Easy-to-read graduated dial.

  Select to compare

  Configure now
  Starting from∗ ：	376.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digit Outside Micrometer

  MITUTOYO

  This Digit Outside Micrometer comes with a mechanical counter and offers you the following benefits:
  - Mechanical Digit counter
  - Quick and easy reading

  Select to compare

  Configure now
  Starting from∗ ：	155.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital 3-Point Internal Micrometer Set

  MITUTOYO

  These are three-point internal micrometers that offer you the following benefits:
  - Interchangeable head set.
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  - Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  - With setting rings and extensions.

  Select to compare

  Configure now
  Starting from∗ ：	1,853.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Absolute Micrometer QuickMike

  MITUTOYO

  This Quickmike, with a non-rotating spindle, delivers much faster movement than standard models.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - With 10 mm feed per thimble rotation, it delivers twenty times as fast as standard devices.
  - Excellent resistance against water and dust (IP65) enables this micrometer to be used in machining situations that include splashing coolant fluid.
  - ABSOLUTE linear scale means no restriction on adjustment speed.
  - Larger measuring range - 30 mm compared with 25 mm - than standard micrometer.

  Select to compare

  Configure now
  Starting from∗ ：	499.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Screw Thread Micrometer IP65, Series 326

  MITUTOYO

  This Digimatic Screw Thread Micrometer should be used with optional, interchangeable, anvils/spindle-tips that allow you to measure a wide range of metric/unified and Whitworth screw-thread pitch diameters. A metric (unified) 60º setting standard is included with all models except those measuring range from 0-25 mm.

  Select to compare

  Configure now
  Starting from∗ ：	874.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Sheet Metal Micrometer, Inch

  MITUTOYO

  A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. The extra-deep frame (305 mm/12 inch) enables measurement of sheet metal thickness farther from the edge of a sheet than is possible with a standard deep-frame micrometer. A ratchet stop guarantees repeatable measurement. Digimatic data output.

  Select to compare

  Configure now
  Starting from∗ ：	1,330.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	2,006.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Set

  MITUTOYO

  Cut-away frame behind anvil for measuring in hard to reach places. A ratchet stop or friction thimble guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	417.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Select to compare

  Configure now
  Starting from∗ ：	1,017.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Disc Micrometer, Adjustable Force

  MITUTOYO

  The ABSOLUTE Digimatic Disc Micrometer Quickmike allows you to measure with a fast spindle feed of 10 mm per thimble rotation.
  It offers you the following benefits:
  - Suitable for measuring felt, rubber, cardboard, fabric etc.
  - Suitable to measure "root tangent length" of spur gears and helical gears.
  - With a non-rotating spindle and disc-shaped measuring surface.
  - Measuring force is adjustable for various kinds of workpieces (series 227)

  Select to compare

  Configure now
  Starting from∗ ：	1,387.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Inside Micrometer

  MITUTOYO

  The Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Select to compare

  Configure now
  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Gauge Micrometer

  MITUTOYO

  This Dial Gauge Micrometer allows you to quickly measure mass-produced parts.
  It offers the following benefits:
  - Designed to mount a dial or a Digital indicator for direct GO/NG judgement of mass-produced parts.
  - You can take rapid measurements thanks to its anvil retracting trigger.
  - 3 mm anvil retracting stroke

  Select to compare

  Configure now
  Starting from∗ ：	443.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Inside Micrometer Caliper Type

  MITUTOYO

  The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Select to compare

  Configure now
  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer IP65, Inch/Metric, Friction Thimble

  MITUTOYO

  A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	277.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer QuantuMike IP65

  MITUTOYO

  This is an IP65 micrometer offering movement four times as fast as a standard micrometer.

  Select to compare

  Configure now
  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Stand

  MITUTOYO

  These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tube Micrometer

  MITUTOYO

  This Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings.

  Select to compare

  Configure now
  Starting from∗ ：	177.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tubular Inside Micrometer Set

  MITUTOYO

  This is a standard single rod type inside micrometer (boxed set), with the following features:
  - Standard single rod
  - Carbide measuring faces

  Select to compare

  Configure now
  Starting from∗ ：	633.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  V-Anvil Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with a V-shaped anvil to enable measurement of 5-flute cutting tools, such as taps and reamers. A ratchet stop guarantees repeatable measurement. High resolution provided by a vernier scale on sleeve.

  Select to compare

  Configure now
  Starting from∗ ：	608.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  326/126 Series, Replaceable Anvil Screw Thread Micrometer TMC

  MITUTOYO

  [Applications]
  · Used by replacing the spare stylus on a single main body.
  [Features]
  · The effective diameter of the screw can be read directly (calculation not needed).
  · Equipped with a constant pressure device.
  · With reference rod for reference point adjustment for metric (unified) 60°

  Select to compare

  Configure now
  Starting from∗ ：	77.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike, Inch/Metric

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Select to compare

  Configure now
  Starting from∗ ：	1,338.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Micrometer, Adjustable Force

  MITUTOYO

  This Quickmike has an adjustable measuring force to suit various kinds of workpieces.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - It's dedicated to applications requiring a constant/low measuring force such as measuring wire, paper and plastic/rubber parts.
  - Constant and low measuring force mechanism in the thimble.
  - Non-rotating spindle
  - Speedy spindle feed of 10 mm per thimble rotation

  Select to compare

  Configure now
  Starting from∗ ：	1,214.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Blade Micrometer

  MITUTOYO

  This Blade Micrometer is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts
  - Non-rotating spindle

  Select to compare

  Configure now
  Starting from∗ ：	303.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with caliper jaws to enable measurement in confined spaces. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	390.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Can Seam Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring the width, height and depth of steel-can seams.

  Select to compare

  Configure now
  Starting from∗ ：	262.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer

  MITUTOYO

  A Mitutoyo non-digital depth micrometer. The 63 mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.

  Select to compare

  Configure now
  Starting from∗ ：	174.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer Carbide Tipped Rod

  MITUTOYO

  This Depth Micrometer offers you the following benefits:
  - ∅4 mm measuring rod
  - Ratchet stop provides you with constant measuring force.
  - Measuring rod lock
  - Carbide-tipped measuring rod model is available.

  Select to compare

  Configure now
  Starting from∗ ：	207.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Depth Micrometer, Interchangeable Rods

  MITUTOYO

  This interchangeable rod type micrometer can be used for wide range measurements.
  It offers you the following benefits:
  - ∅4 mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement.
  - The ratchet stop provides constant measuring force.
  - Measuring rod lock

  Select to compare

  Configure now
  Starting from∗ ：	170.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Micrometer IP65 Metric

  MITUTOYO

  This IP65 Micrometer offers outstanding accuracy, with data output, is highly robust and offers the following benefits:
  - Oil-resistant material used for all plastic parts
  - Extraordinary battery life of 2.4 years
  - Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid.

  Select to compare

  Configure now
  Starting from∗ ：	1,259.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital 3-Point Internal Micrometer

  MITUTOYO

  These are three-point internal micrometers that offer you the following benefits:
  - Individual micrometer
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  - Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  - Without setting rings or extensions.

  Select to compare

  Configure now
  Starting from∗ ：	1,228.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Absolute Micrometer QuickMike, Inch

  MITUTOYO

  This Quickmike, with a non-rotating spindle, delivers much faster movement than standard models.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - With 10 mm feed per thimble rotation, it delivers twenty times as fast as standard devices.
  - Excellent resistance against water and dust (IP65) enables this micrometer to be used in machining situations that include splashing coolant fluid.
  - ABSOLUTE linear scale means no restriction on adjustment speed.
  - Larger measuring range - 30 mm compared with 25 mm - than standard micrometer.

  Select to compare

  Configure now
  Starting from∗ ：	587.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Blade Micrometer

  MITUTOYO

  This Digimatic Blade Micrometer is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle

  Select to compare

  Configure now
  Starting from∗ ：	1,151.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Crimp Height Micrometer IP65

  MITUTOYO

  This Crimp Height Micrometer that features a flat anvil and pointed spindle offers you the following benefits:
  - It allows you to measure the crimped height of electrical contacts.
  - Excellent resistance against water and dust (IP65 protection level).

  Select to compare

  Configure now
  Starting from∗ ：	720.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Depth Micrometer

  MITUTOYO

  This interchangeable rod type micrometer can be used for wide range measurements.
  It offers you the following benefits:
  - ∅4 mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement.
  - The ratchet stop provides constant measuring force.
  - Measuring rod lock

  Select to compare

  Configure now
  Starting from∗ ：	938.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Disc Micrometer IP65

  MITUTOYO

  This Digimatic Disc Micrometer enables you to measure hard-to-reach features, offering you the following benefits:
  - Measuring the root tangent length of spur and helical gears.
  - You can measure recessed features that are difficult to reach with a standard micrometer.

  Select to compare

  Configure now
  Starting from∗ ：	851.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Disc Micrometer QuickMike, IP65

  MITUTOYO

  The ABSOLUTE Digimatic Disc Micrometer Quickmike allows you to measure with a fast spindle feed of 10 mm per thimble rotation.
  It offers you the following benefits:
  - Suitable for measuring felt, rubber, cardboard, fabric etc.
  - Suitable to measure "root tangent length" of spur gears and helical gears.
  - With a non-rotating spindle and disc-shaped measuring surface.
  - Measuring force is adjustable for various kinds of workpieces (series 227)

  Select to compare

  Configure now
  Starting from∗ ：	1,018.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Disc Micrometer, IP65, Non-Rotating Spindle

  MITUTOYO

  This Digimatic Disc Micrometer allows you to measure a range of different materials.
  It offers you the following benefits:
  - Non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - Suitable for measuring felt, rubber, cardboard, fabric etc.

  Select to compare

  Configure now
  Starting from∗ ：	946.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Flute V-Anvil Micrometer

  MITUTOYO

  This Digimatic V-Anvil Micrometer helps you to measure cutting tools and taps.
  It offers the following benefits:
  - It measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three flutes.
  - V-anvils with a centreline groove are available for measuring the pitch diameter of taps by the single-wire method.

  Select to compare

  Configure now
  Starting from∗ ：	1,009.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...