Data Measurement Equipment（Page 2）

?* Information on days to ship and prices

• 

  Stylus M4 Ruby Ball, Ceramic Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface.

  Select to compare

  Configure now
  Starting from∗ ：	78.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M3 Ruby Ball, Carbide Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	43.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M2 Ruby Ball, Stainless Steel Stem

  MITUTOYO

  Straight styli are used to detect easily reachable features on the measured surface. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	27.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stylus M2 Diamond Coated Ball

  MITUTOYO

  The properties of diamond coated styli are outstanding. While ruby and most other commonly used styli ball materials are exposed to and suffer from abrasive or adhesive wear, diamond coated balls offer advantage over all these styli ball materials. They will outlast ruby balls in everyday use and therefore pay off as a long term investment. Additionally they are not subject to the adhesion of material particles when scanning for e.g. aluminium components. When it comes to measure modern wear resistant coatings with a high surface hardness, diamond coated styli are essential to the success of the measurement, as ruby ball styli can already suffer massive wear in the first measurement cycle.

  Select to compare

  Configure now
  Starting from∗ ：	579.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Special Base Plate

  MITUTOYO

  Fixturing base plate designed for direct mounting on the granite table of CRYSTA-Apex . The base plate provides multiple possibilities for fixing fixtures and direct construction of jigs on the CMM. It is equipped with fixing threads M6 in a 25mm / 50mm grid to directly position and build up fixtures. The base plate is designed to perfectly match the Mitutoyo eco-fix clamping system and also for fixing aids such as chucks, positioning angles or the like. In addition, threads M8 are used to attach CMM accessories such as Measuring balls or stylus rack which are located in the edge area on the base plates. Besides the wide area base for fixturing, it also protects the valuable granite base of the CMM. Precision machined from a high quality aluminum alloy and provided with a surface finish that makes the base plates extremely durable. 1 Segment.

  Select to compare

  Configure now
  Starting from∗ ：	1,100.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Overlay Chart for Meas Projector

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	100.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Loading Receiver Pallet

  MITUTOYO

  Repositiong receiver plate with repositioning receivers for 250mm and 500mm base plates. Achieve easy and precise repositioning and enhance your semi-automatic serial CMM measurement process by using the pallet receiver system plate with its 3 point repositioning system. Results in a significatly higher measurement throughput.

  Select to compare

  Configure now
  Starting from∗ ：	1,360.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flexible Jointed Arm

  MITUTOYO

  Mechanical clamping

  Select to compare

  Configure now
  Starting from∗ ：	247.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension M4, Ceramic

  MITUTOYO

  Multiway stylus holders enable the flexible configuration of star styli. Extensions are required when the measurement location cannot be accessed with the stylus alone, for e.g. to reach features in bores and hard to access areas on the workpiece. The very lightweight and extremely stiff character of ceramic materials and its low thermal expansion, makes it the ideal material, especially for long stems and extensions. The brittle characteristic can protect probes from the effects of crash.

  Select to compare

  Configure now
  Starting from∗ ：	47.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension M3, Carbon Fiber

  MITUTOYO

  Extensions are required when the measurement location cannot be accessed with the stylus alone, for e.g. to reach features in bores and hard to access areas on the workpiece. Carbon fibre, the very lightweight and extremely stiff high quality material, with a thermal expansion coefficient close to zero, is particularly suitable for the manufacture and application of long styli and extensions.

  Select to compare

  Configure now
  Starting from∗ ：	123.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Extension Holder

  MITUTOYO

  Mitutoyo Extension Holder

  Select to compare

  Configure now
  Starting from∗ ：	319.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ethernet/IP I/F Unit for EJ Counter

  MITUTOYO

  Designed to collect data from Mitutoyo's compact EJ Counters, this interface connectsmeasurement peripherals to your IO controllers with ease!
  • Quick and easy setup, the Ethernet/IP interface directly connects to your EJ counters.
  • Compact, the interface was created with a low profile in mind, maintaining the ability tomount an entire system in small spaces on a single DIN rail.
  • Conforming to Ethernet/IP´s industrial standards, you can now use it as an input into yourpreexisting Ethernet/IP system.
  • Secure, Ethernet/IP systems are widely used as standard throughout many industries.

  Select to compare

  Configure now
  Starting from∗ ：	1,102.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EJ-Counter -102N

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms.Multipoint measuring systems with a maximum of 16 gauges can be configured. The EJ-Counter is attached to a DIN rail for use. Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M.Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required).

  Select to compare

  Configure now
  Starting from∗ ：	630.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disk Stylus Ruby M2, Carbide Stem

  MITUTOYO

  Applications that incorporate the inspection of grooves, undercut sections in bores and similar, are often not accessible with other styli configurations. These task can be best executed with disk styli. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	150.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disk Stylus Hardened Steel M3

  MITUTOYO

  Applications that incorporate the inspection of grooves, undercut sections in bores and similar, are often not accessible with other styli configurations. These task can be best executed with disk styli. Ruby, as the hardest of all stylus tip materials, is the perfect choice for most applications. Bend-resistant styli stems made of tungsten carbide are ideal for virtually all standard applications in the measuring lab with its high rigidity properties. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	161.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Solar Indicator ID-SS, ANSI/AGD

  MITUTOYO

  This solar-powered, standard model is environmentally friendly and very easy to use.The ABSOLUTE Digimatic Solar Indicator ID-SS offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.There‘s no battery to change.The solar cell is operates from just 40 Lux.Super-capacitor charge storage enables you to work in low-level lighting conditions of less than 40 Lux.
  You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.

  Select to compare

  Configure now
  Starting from∗ ：	187.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Calculation ID-C, Inch/Metric

  MITUTOYO

  This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1. The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement). Coefficients A,B and C are freely definable. X = displacement of the plunger. Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function. MAX/MIN/RANGE function to measure peak values. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup  via a setup menu. A USB interface box can be used to set up the indicator from PC via dedicated software

  Select to compare

  Configure now
  Starting from∗ ：	612.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-F

  MITUTOYO

  This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
  Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital step

  Select to compare

  Configure now
  Starting from∗ ：	818.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Data Logger

  MITUTOYO

  The Digimatic DL-1000 and 1000 M are data loggers designed for storing measurement data recorded by a Digimatic measuring instrument for subsequent output to a computer. They allow you to collect data when away from a PC, and transfer it later. These Digimatic Data Loggers offer the following benefits:
  The measuring device is connected to the I/O port of the DL-1000/1000 M with a data cable, and you can transmit data either using the data button on the measuring device or on the DL-1000/1000 M.For data transfer the devices are connected via an interface to the target computer. Data transfer from the DL-1000/1000 M is executed with the data button or footswitch of an interface or upon request from the respective software. The DL-1000/1000 M is recognised by the measurement device as a Digimatic measurement instrument.You can output data directly to a printer equipped with a Digimatic interface.

  Select to compare

  Configure now
  Starting from∗ ：	731.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cube, Right-angled Direction Change

  MITUTOYO

  Cube M6 for rectangular change of direction in the room.

  Select to compare

  Configure now
  Starting from∗ ：	78.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Rail

  MITUTOYO

  eco-fix rail.
  Flexible positioning rail system using eco-fix and eco-fixplus components.
  T-slot implied for additional fixturing options.
  Quick change of the base dimension according to workpiece size by moving the corner connectors.
  Fast repositioning with the attachable base plates.
  Build an angle from the rails to easily reposition a base plate.

  Select to compare

  Configure now
  Starting from∗ ：	48.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjustable Location Pin

  MITUTOYO

  The adjustable location pin is used for adjustment of the required height of receiving positions.

  Select to compare

  Configure now
  Starting from∗ ：	46.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ABSOLUTE Digital Thickness Gauge with ID-S

  MITUTOYO

  This ABSOLUTE Digimatic Thickness Gauge enables you to measure film, paper, etc., with flat contact points. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.

  Select to compare

  Configure now
  Starting from∗ ：	438.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connection Cable

  MITUTOYO

  Various dedicated connection cables.
  [Cable length (mm)]1/2

  Select to compare

  Configure now
  Starting from∗ ：	44.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  BT Extension with clamp

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	348.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Millimar Measuring springs RS15

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	18.63 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Swivel Element, Compact, Type A with Spring Drive

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	419.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  AAD-193 Adaptor 3 / 8-32 to 1 / 4-28 with bleed

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	262.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Power supply module Millimar N 1701 PS

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	298.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MV53 Vert. measuring stand 2xoutside 1x inside

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	10,988.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Column

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	200.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Pneumatic Cylnder for BML30

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	132.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MV53 Vert. measuring stand 1xinside+1xoutside

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	8,691.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  SMPR, Extension with Clamp L120

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	342.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TV5 Extention Ø5

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	8.91 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Module for inductive probes Millimar N 1704 M

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	795.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  VG Carbide prism 90° adjustable G100

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	427.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  BM100 Block element with probe and pneu. lifter

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	1,285.71 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  EM3444 Set screw M4 L4

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	2.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Millimar Double measuring fork FD26

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	620.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Inductive probe Millimar P1300 MB without cable

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	371.43 €
  Min. Shipping Days ：	31 Days

  *Unit price with basic configuration

• 

  BM50 Block element with probe ±2

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	1,008.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  ET90 Precision turning unit Morse taper 1

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	4,045.71 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Millimar Measuring bench DIA

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	905.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  PR774 Base plate for coordinate tables ±5

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	258.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...