Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
KNIPEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
WERA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
HOZAN
Precision Screwdriver 6 Piece Set【1 až 6 kusů】
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) / Phillips (+)/Flathead(-) | No. 0 / No. 1 | 1.2 ~ 3 | - | Single Item / Set Product | Round | N/A | N/A | N/A |
ANEX
Superfit Precision Hexalobular Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | 30 | Single Item | Round | N/A | N/A | N/A |
KTC(KYOTO TOOL)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Box / Combination / Other | No. 1 / No. 2 / No. 3 | 5.5 ~ 8 | - | Single Item / Set Product | Square | N/A | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
WIHA
Screwdriver SoftFinish® Electric slimFix, Pozidriv
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
WIHA
Screwdriver with SoftFinish® CentroFix Bit Holder, Mechanically Lockable, 1/4"
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
ANEX
Stubby Phosphorescent Screwdriver (Magnetic)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 | - | 100 | Single Item | Round | Available | N/A | N/A |
ANEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) / Torx / Other | No. 00 / No. 0 | 0.9 ~ 2.1 | 10 ~ 24 | Single Item / Set Product | Round | N/A | N/A | N/A |
PB SWISS TOOLS
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Ballpoint | - | - | 80 ~ 120 | Single Item | Square | N/A | N/A | N/A |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 | - | - | Single Item | - | Available | - | - |
TRUSCO NAKAYAMA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item / Set Product | - | - | - | - |
WERA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | 97 | - | - | - | - | - |
CIMCO
1000 V Angled, T-Handle Screwdriver / DIN EN 60900 VDE 0680 / Chromium-vanadium steel
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | 45 ~ 160 | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Ball Grip Tang Thru Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
MEGADORA IMPACTA Pozidriv Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 3 | - | 153 | Single Item | Square | Available | Available | N/A |
MAEDAKINNZOKU
Long Shaft Screwdriver (Through) KLD-M3
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 9 | 275 | Single Item | Square | Available | Available | N/A |
MAEDAKINNZOKU
Long Shaft Screwdriver (Through) KLD-P
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 / No. 3 | - | 275 | Single Item | Square | Available | Available | N/A |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 1 / No. 2 / No. 3 | 4.9 ~ 9 | 76 ~ 153 | Set Product | Square | Available | Available | N/A |
HOZAN
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item | - | - | - | - |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 1 / No. 2 | - | 14 | Single Item | Square | Available | N/A | N/A |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 1 / No. 2 | 4.5 ~ 6 | - | Single Item | - | Available | - | - |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Hexagon | - | - | 90 | Single Item | Square | N/A | N/A | N/A |
ANEX
Superfit Precision Ball Point Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Ballpoint | - | - | 75 | Single Item | Square | N/A | N/A | N/A |
ANEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 2 | 6 | - | Single Item | Round | N/A | - | - |
ANEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 1 / No. 2 / No. 3 | 6 | - | Set Product | Round | N/A | - | - |
ANEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item | - | - | - | - |
SUNFLAG
Offset Ratchet Driver With Forward/Reverse Switch
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | - | 6 | - | Single Item | - | N/A | - | - |
SUNFLAG
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | - | Set Product | - | N/A | - | - |
WERA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | 130 | Single Item | Round | N/A | N/A | N/A |
EIGHT TOOL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Hexagon | - | - | 70 ~ 110 | Single Item / Set Product | Square | N/A | N/A | N/A |
PB SWISS TOOLS
Hex Rod Type Screwdriver (Long)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Hexagon | - | - | 120 ~ 200 | Single Item | Square | N/A | N/A | N/A |
KTC(KYOTO TOOL)
Resin Handle Screwdriver (with Throughput / Magnet)_with Bolster
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) / Flathead (-) | No. 1 / No. 2 | 5.5 ~ 8 | 75 ~ 150 | Single Item | Round | Available | Available | Included |
KTC(KYOTO TOOL)
Resin Handle Screwdriver Long (with Throughput / Magnet)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) / Flathead (-) | No. 1 / No. 2 / No. 3 | 5.5 ~ 6.3 | 300 | Single Item | Round | Available | Available | Included |
KTC(KYOTO TOOL)
Plate Ratchet Replacement Driver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) / Combination | No. 2 / No. 3 | - | - | Single Item / Set Product | Square | N/A | - | - |
KTC(KYOTO TOOL)
Plate Ratchet Replacement Driver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | - | Set Product | Square | N/A | - | - |
VESSEL
Impact Screwdriver (Set Product)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 2 / No. 3 / No. 4 | 5 ~ 10 | - | Set Product | Round | N/A | - | - |
SK 11
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | No. 1 / No. 2 | 4 ~ 6 | - | Set Product | Square | N/A | - | - |
ENGINEER
Twin Wrench Driver Set (Special Screw Compatible Type)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | No. 1 / No. 2 | 4.5 ~ 6 | - | Set Product | - | Available | - | - |