Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Stock
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Shank Type
  • Coating Y/N
  • Výrobce
  • EIKOSHA Drill Bits

    • Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM
      • Volume Discount

      EIKOSHA

      Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM

      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3.4 ~ 2013 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel65 ~ 145Straight ShankAvailableOtherN/A
      Cena (bez DPH) od:
      74.70 €
      Cena včetně DPH:
      88.89 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • TAS Counterbore with Drill for Small Plate Screws DCBSTA
      • Volume Discount

      EIKOSHA

      TAS Counterbore with Drill for Small Plate Screws DCBSTA

      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3.4 ~ 1411.5 ~ 32General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel60 ~ 102Straight ShankN/A-N/A
      Cena (bez DPH) od:
      76.33 €
      Cena včetně DPH:
      90.83 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Taper Pin Drill (Straight Shank) TPD
      • Volume Discount

      EIKOSHA

      Taper Pin Drill (Straight Shank) TPD

      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1.98 ~ 19.952 ~ 22General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS65 ~ 370Straight ShankN/A-N/A
      Cena (bez DPH) od:
      97.76 €
      Cena včetně DPH:
      116.33 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Flat Counterbore Drill FZD-A
      • Volume Discount

      EIKOSHA

      Flat Counterbore Drill FZD-A

      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3.05 ~ 1212 ~ 38General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Powder high-speed steel50 ~ 90Straight ShankAvailableTiAlNN/A
      Cena (bez DPH) od:
      61.75 €
      Cena včetně DPH:
      73.48 €
      Běžné datum odeslání:
      6 pracovních dnů
      Konfigurovat
    • Drill Bit for Pipe (Straight Shank) PTDS

        EIKOSHA

        Drill Bit for Pipe (Straight Shank) PTDS

        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        6 ~ 10.74 ~ 8General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS110 ~ 125Straight ShankN/A-N/A
        Cena (bez DPH) od:
        107.35 €
        Cena včetně DPH:
        127.75 €
        Běžné datum odeslání:
        6 pracovních dnů
        Konfigurovat
      • Drill Bit for Pipe (Tapered Shank) PTDT

          EIKOSHA

          Drill Bit for Pipe (Tapered Shank) PTDT

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          7.8 ~ 55.25 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS115 ~ 275Taper shankN/A-N/A
          Cena (bez DPH) od:
          106.97 €
          Cena včetně DPH:
          127.29 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Small Plate Screw Drill with Step for Sinking Use DCB-SSM
          • Volume Discount

          EIKOSHA

          Small Plate Screw Drill with Step for Sinking Use DCB-SSM

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3.4 ~ 911.5 ~ 24.25General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel65 ~ 90Straight ShankAvailableOtherN/A
          Cena (bez DPH) od:
          75.43 €
          Cena včetně DPH:
          89.76 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Counterbore with Drill for Small Plate Screws DCBS
          • Volume Discount

          EIKOSHA

          Counterbore with Drill for Small Plate Screws DCBS

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3.5 ~ 8.510 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel44 ~ 76Straight ShankN/A-N/A
          Cena (bez DPH) od:
          68.57 €
          Cena včetně DPH:
          81.60 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Carbide Semicircular Drill CSHD
          • Volume Discount

          EIKOSHA

          Carbide Semicircular Drill CSHD

          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2.5 ~ 4.123 ~ 30General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide45 ~ 55Straight ShankN/A-N/A
          Cena (bez DPH) od:
          53.19 €
          Cena včetně DPH:
          63.30 €
          Běžné datum odeslání:
          6 pracovních dnů
          Konfigurovat
        • Hexagonal Bolt Drill with Step for Submerged Use R Type DCB-TRM

            EIKOSHA

            Hexagonal Bolt Drill with Step for Submerged Use R Type DCB-TRM

            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            5.3 ~ 2522 ~ 70General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel120 ~ 275Taper shankN/A-N/A
            Cena (bez DPH) od:
            96.83 €
            Cena včetně DPH:
            115.23 €
            Běžné datum odeslání:
            6 pracovních dnů
            Konfigurovat
          • Hexagonal Bolt Drill with Step for Submerged Use Z Type DCB-TZM

              EIKOSHA

              Hexagonal Bolt Drill with Step for Submerged Use Z Type DCB-TZM

              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.4 ~ 3313 ~ 100General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel110 ~ 335Taper shankN/A-N/A
              Cena (bez DPH) od:
              96.83 €
              Cena včetně DPH:
              115.23 €
              Běžné datum odeslání:
              6 pracovních dnů
              Konfigurovat
            • Counterbore with Drill for Bolts with Hexagonal Holes DCB
              • SLEVA
              • Volume Discount

              EIKOSHA

              Counterbore with Drill for Bolts with Hexagonal Holes DCB

              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3.5 ~ 2010 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel48 ~ 189Straight Shank / Taper shankN/A-N/A
              Cena (bez DPH) od:
              51.47 €
              Speciální cena
              Běžné datum odeslání:
              Skladová položka: 1 pracovní den
              Některé položky lze dodat ve stejný den
              Konfigurovat