GANTER Hinges
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Flat hinges / conical countersinks / stainless steel / GN 237 / GANTER
GANTER
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / conical recesses / -90°, 180° / material selectable / coating selectable / GANTER
GANTER
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / conical countersinks / asymmetrical / material selectable / coating selectable / GN 237 / GANTER
GANTER
Hinges GN 237 with extended hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Torque hinges / conical countersinks / zinc die-cast / GN 437 / GANTER
GANTER
The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / conical countersinks / rolled / steel / galvanised, blue passivated / GN 136 / GANTER
GANTER
Sheet metal hinges GN 136 are low-cost designs for low-load applications.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.16 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Multi-pivot hinges / slotted holes / 7-axis / rolled / stainless steel / matt polished / GN 1362 / GANTER
GANTER
Stainless Steel-Multiple-joint hinges GN 7237 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.
Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one type L and one type R are used per opening. For higher loads, e.g. from large hatches, these can be supplemented with additional hinges of either type.- Volume Discount
Starting from∗ ： 109.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / asymmetrical / rolled / stainless steel / blank, galvanised, blue passivated / GN 136 / GANTER
GANTER
GN 136 Stainless Steel-Sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.Type A can be fixed in place by welding or by using holes made by the customer.- Volume Discount
Starting from∗ ： 3.18 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER
GANTER
Hinges GN 128 are produced from drawn weldable profiled steel extrusions.
Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.
The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER
GANTER
With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.04 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 20.46 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat plug-in hinges / conical countersinks / zinc / GN 337 / GANTER
GANTER
Hinges detachable, Zinc die casting- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.32 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER
GANTER
With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 43.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER
GANTER
Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 170.88 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat hinges / asymmetrical / rolled / stainless steel / blank / GN 1364 / GANTER
GANTER
Pointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.Type B is fastened via the existing through-holes using screws or rivets.- Volume Discount
Starting from∗ ： 9.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / unpunched / weldable / rolled / stainless steel / blank / GN 1362 / GANTER
GANTER
Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.- Volume Discount
Starting from∗ ： 5.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 110.76 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges / screw bolts / steel / GN 129.2 / GANTER
GANTER
Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER
GANTER
Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 28.12 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat plug-in hinges / conical recesses / -90°, 180° / stainless steel / GN 337 / GANTER
GANTER
Stainless Steel-Hinges detachable- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 18.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER
GANTER
Hinges GN 128.2 are produced from drawn weldable profiled Stainless Steel extrusions.
The pin is fixed in the lower half.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 16.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / unperforated / rolled / stainless steel / blank / GN 136 / GANTER
GANTER
Stainless Steel-Sheet metal hinges GN 136 are low-cost designs for low-load applications.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.98 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / asymmetrical / rolled / steel / zinc plated, blue passivated / GN 235 / GANTER
GANTER
GN 136 sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.- Volume Discount
Starting from∗ ： 2.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 12.00 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 27.88 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type CK / GANTER
GANTER
Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof. Hinges GN 139.6 without switching function act as additional hinges, e.g. for larger doors or gates where several hinges are required.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 690.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges / cylinder countersinks / steel / GN 129.3 / GANTER
GANTER
Hinges GN 129.3 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 24.52 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat hinges / slotted holes / asymmetrical / zinc die-cast / GN 161 / GANTER
GANTER
Hinges GN 161 have been designed for commercially available profile rails.
With three different types of hinges only, 66 different groove distances „n“ can be accommodated. To achieve this the positioning elements are set in specially marked recesses in the hinge wings.
The rectangular (8x10 mm) positioning elements, two pieces per hinge wing, will prevent a misalignment. They will also carry the weight of the door.
For screwing the hinges onto the profile rails, special T-Nuts are used.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 15.80 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER
GANTER
Hinges GN 128.2 are produced from drawn weldable profiled Aluminuim extrusions.
The pin is fixed in the lower half.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.68 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 139.1 / GANTER
GANTER
Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 172.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type A,B,C / GANTER
GANTER
Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 697.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flat hinges / conical countersinks, compensating element / adjusting inserts / adjusting inserts / zinc die-cast / GN 127 / GANTER
GANTER
Hinges GN 127 allow the technically and visually perfect positioning and alignment of a door in its frame.
The serrations at the wings of the hinge and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. The tips of the arrows mark the 0 reference point for easier installation.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 18.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / tapered / zinc die-cast / GN 238 / GANTER
GANTER
The adjustable hinges GN 238 allow the technically and visually perfect positioning and alignment of a door in its frame.
The steel adjusting disc has a cutting ring in its underside which cuts into the radial fins of the zinc die-cast wings when the countersunk screw is tightened, virtually creating a form-lock that prevents adjusting the hinge after mounting.
The covers conceal the fixing elements and lend the hinge an attractive optical appearance.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Corner hinges / screw bolt / steel / GN 129 / GANTER
GANTER
Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door.
In the two-part design, the door can be unhinged with two identically arranged hinges.
The three-part hinges, which generally cannot be unhinged and are mounted inside, are suitable for doors and flaps which, as anti-tamper precaution, must not be dismountable from the outside.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER
GANTER
Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges, plug-in / internal thread / Zinc / GN 161.2 / GANTER
GANTER
Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.40 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER
GANTER
The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
The long slotted holes allow the attachment to profile
systems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 26.52 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER
GANTER
The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
The long slotted holes allow the attachment to profile
s ystems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 38.10 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Door hinges / internal thread / stainless steel / 139.6-76-126 / GANTER
GANTER
With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.
The compact design combines safety and attractive appearance.
The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 530.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Corner hinges / screw bolts / stainless steel / GN 129.2 / GANTER
GANTER
Stainless Steel-Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 33.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / oblong holes / stainless steel / GN 7237 / GANTER
GANTER
Stainless Steel-Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.- Volume Discount
Starting from∗ ： 17.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flat hinges / unpunched / weldable / rolled / steel / blank / GN 1366 / GANTER
GANTER
Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.- Volume Discount
Starting from∗ ： 12.10 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat hinges / slotted holes / zinc die-cast / GN 1366 / GANTER
GANTER
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.- Volume Discount
Starting from∗ ： 12.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 9.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 30.26 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 18.10 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body Type |
| Flat Hinge Type |
| Detachable Flag Hinges Type |
| Length L *Figure in () is the min length of the adjustable type.(mm) |
| Operating Environment |
| Main Body Material |
| Main Body Surface Treatment |
| Width W(mm) |
| Additional Function |
| Reversed |
| Mounting Method |
| Mounting Screw Hole Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Flat hinges / conical countersinks / stainless steel / GN 237 / GANTER | Flat hinges / conical recesses / -90°, 180° / material selectable / coating selectable / GANTER | Torque hinges / conical countersinks / zinc die-cast / GN 437 / GANTER | Flat hinges / conical countersinks / rolled / steel / galvanised, blue passivated / GN 136 / GANTER | Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER | Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 138 / GANTER | Flat plug-in hinges / conical countersinks / zinc / GN 337 / GANTER | Door hinges / internal thread / zinc die-cast / GN 139.2 / GANTER | Door hinges / internal thread / zinc die-cast / GN 139.2, type AK,CK / GANTER | Flat hinges / asymmetrical / rolled / stainless steel / blank / GN 1364 / GANTER | Flat hinges / unpunched / weldable / rolled / stainless steel / blank / GN 1362 / GANTER | Corner hinges / screw bolts / stainless steel / GN 129.5 / GANTER | Flat plug-in hinges / conical recesses / -90°, 180° / stainless steel / GN 337 / GANTER | Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER | Flat hinges / unperforated / rolled / stainless steel / blank / GN 136 / GANTER | Flat hinges / asymmetrical / rolled / steel / zinc plated, blue passivated / GN 235 / GANTER | Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type CK / GANTER | Corner hinges / cylinder countersinks / steel / GN 129.3 / GANTER | Flat hinges / slotted holes / asymmetrical / zinc die-cast / GN 161 / GANTER | Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER | Flat hinges / internal thread / asymmetrical / zinc die-cast / GN 139.1 / GANTER | Door hinges with safety switch / internal thread / stainless steel / GN 139.5, Type A,B,C / GANTER | Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER | Corner hinges, plug-in / internal thread / Zinc / GN 161.2 / GANTER | Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER | Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER | Door hinges / internal thread / stainless steel / 139.6-76-126 / GANTER | Corner hinges / screw bolts / stainless steel / GN 129.2 / GANTER | Flat hinges / oblong holes / stainless steel / GN 7237 / GANTER | Flat hinges / unpunched / weldable / rolled / steel / blank / GN 1366 / GANTER | Flat hinges / slotted holes / zinc die-cast / GN 1366 / GANTER | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| Starting from∗ | 12.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.20 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.78 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.00 € *Unit price with basic configuration Volume Discount | 2.16 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 109.78 € *Unit price with basic configuration Volume Discount | 3.18 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.60 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.04 € *Unit price with basic configuration Volume Discount | 20.46 € *Unit price with basic configuration Volume Discount | 10.32 € *Unit price with basic configuration Volume Discount | 43.20 € *Unit price with basic configuration Volume Discount | 170.88 € *Unit price with basic configuration Volume Discount | 9.50 € *Unit price with basic configuration Volume Discount | 5.32 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 110.76 € *Unit price with basic configuration Volume Discount | 17.66 € *Unit price with basic configuration Volume Discount | 28.12 € *Unit price with basic configuration Volume Discount | 18.20 € *Unit price with basic configuration Volume Discount | 16.92 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.98 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.38 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.00 € *Unit price with basic configuration Volume Discount | 27.88 € *Unit price with basic configuration Volume Discount | 690.86 € *Unit price with basic configuration Volume Discount | 24.52 € *Unit price with basic configuration Volume Discount | 15.80 € *Unit price with basic configuration Volume Discount | 5.68 € *Unit price with basic configuration Volume Discount | 172.86 € *Unit price with basic configuration Volume Discount | 697.36 € *Unit price with basic configuration Volume Discount | 18.66 € *Unit price with basic configuration Volume Discount | 11.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.20 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.20 € *Unit price with basic configuration Volume Discount | 11.40 € *Unit price with basic configuration Volume Discount | 26.52 € *Unit price with basic configuration Volume Discount | 38.10 € *Unit price with basic configuration Volume Discount | 530.48 € *Unit price with basic configuration Volume Discount | 33.36 € *Unit price with basic configuration Volume Discount | 17.36 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.10 € *Unit price with basic configuration Volume Discount | 12.36 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.66 € *Unit price with basic configuration Volume Discount | 30.26 € *Unit price with basic configuration Volume Discount | 18.10 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | 7 Days | Same day | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | Same day | 7 Days | 7 Days | 7 Days | 7 Days | Same day | Same day | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 4 Days | Same day | Same day | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | Same day | 7 Days | Same day | 7 Days | 7 Days | 7 Days |
| Main Body Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Flat Hinge Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Detachable Flag Hinges Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L *Figure in () is the min length of the adjustable type.(mm) | 30 ～ 60 | 30 ～ 60 | 50 ～ 60 | 40 ～ 60 | 30 ～ 90 | 26 ～ 40 | 30 ～ 60 | - | 42 ～ 62 | - | 40 ～ 60 | 101 | 101 | 50 | 30 ～ 100 | - | 40 ～ 51 | - | 40 ～ 60 | - | 30 ～ 90 | 30 ～ 60 | - | - | 126 | 55 | - | - | 101 | 126 | 60 | 42 ～ 60 | - | - | - | - | - | 126 | 40 ～ 51 | 45 ～ 65 | 30 ～ 100 | 45 ～ 65 | - | - | - |
| Operating Environment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Stainless Steel | Aluminum / Zinc Alloy | Stainless Steel / Zinc Alloy | Zinc Alloy | Steel | Stainless Steel | Stainless Steel | - | Zinc Alloy | - | Zinc Alloy | - | - | Stainless Steel | Stainless Steel | - | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | - | - | - | Steel | - | Aluminum | - | - | - | - | - | - | - | - | - | - | Stainless Steel | Stainless Steel | Steel | Zinc Alloy | - | - | - |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width W(mm) | 30 ～ 60 | 30 ～ 60 | 63 ～ 120 | 40 ～ 60 | 30 ～ 60 | - | 45 ～ 120 | 40 ～ 200 | 40 ～ 60 | - | 40 ～ 60 | 49 ～ 79 | 49 ～ 79 | 70 | 60 ～ 100 | - | 45 ～ 61 | - | 40 ～ 60 | 60 ～ 180 | 30 ～ 60 | 45 ～ 120 | - | - | 76 | 66 ～ 91 | 57 ～ 80 | 60 ～ 180 | 49 ～ 79 | 76 | 76 | 42 ～ 60 | - | 63 | 63 | 101 | 170 | 76 | 45 ～ 50 | 40 ～ 76 | 60 ～ 220 | 40 ～ 76 | - | - | - |
| Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Reversed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Screw Hole Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Main Body Type
-
Flat Hinge Type
-
Detachable Flag Hinges Type
-
Length L *Figure in () is the min length of the adjustable type.(mm)
- 2,000
- 6
- 6.5
- 10
- 17
- 18
- 19
- 20
- 21
- 22
- 23.5
- 24
- 25
- 25.5
- 26
- 27.5
- 29
- 30
- 30.5
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 38
- 39.5
- 40
- 40.5
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 48.5
- 49.5
- 50
- 50.5
- 51
- 52
- 53
- 54
- 54.5
- 55
- 56
- 57
- 59
- 60
- 61
- 62
- 63
- 63.4
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 71
- 71.7
- 72
- 73
- 75
- 75.5
- 76
- 76.5
- 76.7
- 77
- 78
- 79
- 80
- 81
- 81.7
- 82
- 83
- 84
- 85
- 86
- 86.7
- 87
- 87.5
- 88
- 89
- 90
- 92
- 94
- 95
- 95.3
- 96
- 96.5
- 97
- 100
- 101
- 101.2
- 101.5
- 101.7
- 102
- 103
- 104
- 106
- 107
- 108
- 109
- 110
- 113
- 114
- 114.5
- 115
- 117.5
- 118
- 120
- 121
- 123
- 124
- 125
- 126
- 126.5
- 127
- 130
- 132
- 132.5
- 135
- 138
- 139
- 139.7
- 140
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 152.5
- 153
- 154
- 155
- 158
- 160
- 161
- 161.5
- 162
- 170
- 180
- 183
- 184
- 186
- 186.4
- 190
- 200
- 201
- 204
- 210
- 222.3
- 224
- 225
- 250
- 258
- 264
- 289.3
- 300
- 340
- 350
- 400
- 442
- 450
- 476
- 576
- 600
- 626
- 750
- 850
- 900
- 1000
- 1200
- 1800
- 1829
- 1872
- 2000
- 2133
- 2400
- 2500
-
Operating Environment
- Standard
- Corrosion Resistance
- Abrasion Resistance
- Cleanroom
-
Main Body Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Zinc Alloy
- Resin
-
Main Body Surface Treatment
-
Width W(mm)
-
Additional Function
-
Reversed
-
Mounting Method
-
Mounting Screw Hole Type
Narrow search by specifying Brand
-
- MISUMI (41)
- TAKIGEN (360)
- NORELEM (126)
- KIPP (112)
- GANTER (53)
- ELESA (32)
- FUJI LATEX (29)
- TRUSCO NAKAYAMA (26)
- SOWA (21)
- HALDER (20)
- TOK BEARING (16)
- 999SHIMANO (5)
- HILOGIK (5)
- WAKISANGYO (5)
- ACCURATE (3)
- BEST (2)
- KYODO KINZOKU (1)
- ESCO (1)
- IMAO CORPORATION (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Hinges
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.