HALDER Guide Elements（Page 2）

121

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Clamping Bars, length 100, 200, 300, 400 - 700

HALDER

[Specifications]
・Material: Tool steel, hardened
・l1(mm): 400~700
・Suitable for: M8, M12, M16

Clamping Bars, length 100, 200, 300, 400 - 700

3D CAD data available

Starting from^∗ ：	317.55 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Cubes, semi-finished

HALDER

[Specifications]
・Material: Grey cast iron GG
・a(mm): 150, 200
・Suitable for: M12, M16

Clamping Cubes · semi-finished EH 1908.Threaded Lifting Pins, self-locking.

3D CAD data available

Starting from^∗ ：	2,686.63 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Cubes, welded, semi-finished

HALDER

[Specifications]
・Material: Steel, welded
・a(mm): 150, 200
・Suitable for: M12, M16

Clamping Cubes · welded, semi-finished EH 1910.

3D CAD data available

Starting from^∗ ：	2,478.52 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Heads

HALDER

[Specifications]
・Material: Steel, blackened
・System: L12, L16, V70
・Suitable for: M12, M16

3D CAD data available

Starting from^∗ ：	113.27 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Vices, fixed jaw

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・System: V70

Clamping Vices · fixed jaw EH 1137.400

Starting from^∗ ：	530.26 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Clamping Vices, replacement jaw, ribbed / flat

HALDER

[Specifications]
・Material: Steel, case-hardened, blackened
・System: V70

Clamping Vices, replacement jaw, ribbed / flat EH 1138.400

Starting from^∗ ：	96.92 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Combination Clamping Bars

HALDER

The combination clamping bar offers 3 ways to clamp/support the workpiece:
Floating mode
Floating mode is used to clamp and support additional clamping points on components.
Centric mode
The jaws of the clamping bar move in sync. The centre axis of the workpiece remains unchanged even if the outer diameters are modified.
Machine vice mode
When this mode is selected, one of the jaws is locked in place on the clamping bar. The second jaw remains movable.

Starting from^∗ ：	1,374.06 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Consoles

HALDER

[Specifications]
・Material: Grey cast iron, phosphatized
・b(mm): 78, 98
・d1(mm):12, 16
・d2(mm): M12, M16

3D CAD data available

Starting from^∗ ：	1,293.86 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Fixing screws for clamping bars

HALDER

[Specifications]
・l1(mm): 100~700
・n2: 1~7

Fixing screws for clamping bars.

Starting from^∗ ：	23.44 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Floating Clamps, compact construction, separate clamping and locking M 12

HALDER

Floating clamps with separate clamp and locking are used to clamp and support
additional clamping points
on extremly pliable
workpieces. Both, clamping and supporting force can individually be designed.
The benefits of the floating clamp are:
avoids vibration during the processing. clamps ribs, beads and shackles to reinforce clamped components. distortion-free clamping of raw parts. compact version with reduced height.

Starting from^∗ ：	1,091.69 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Strips, reversible

HALDER

Gripper strip can be reversed for mounting on the five-sided machining jaw (4 of them are required). For clamping unmachined parts close to the edge, 3 or 5 mm. Incl. 2 mounting screws M 6 x 16 each (Art. No. 1704.600).

Starting from^∗ ：	153.12 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs

HALDER

Gripper stud for universal gripper set (Art. No. 1702.600).

Starting from^∗ ：	35.14 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs, low

HALDER

For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 3.0 to 4.5 mm.

Starting from^∗ ：	56.13 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs, pointed

HALDER

For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 4.5 to 6.0 mm.

Starting from^∗ ：	56.13 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Gripper Studs, smooth

HALDER

With carbide coating for clamping pre-machined or hardened workpieces.

Starting from^∗ ：	63.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Insertable Plates

HALDER

Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.

3D CAD data available

Starting from^∗ ：	176.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Elements

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・System: V70

Intermediate Elements.

3D CAD data available

Starting from^∗ ：	367.08 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Intermediate Plates / Steel, case-hardened, ground / V40, V70

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・d1(mm): 40, 56
・System: V40, V70

T-Slot Systems Mounting Elements, Intermediate Plates EH 1047.700-EH 1147.700

3D CAD data available

Starting from^∗ ：	136.78 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Jaws for Five-Sided Machining Sets

HALDER

Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
Supplied in handycase consisting of:
4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
4 x wedge elements, four-point (Art. No. 1703.340)
4 x wedge elements, Microgripper (Art. No. 1703.350)
2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)

Starting from^∗ ：	1,436.66 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Jaws for Five-Sided Machining / Jaw

HALDER

Particularly suitable for five-side machining. Better accessibility for tools. Ground clamping surfaces. Additional thread for parallels. Accuracy through pull-down. Stability through form-locking.

3D CAD data available

Starting from^∗ ：	742.97 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Jaws, soft

HALDER

For self-made special jaws. Chamfer provides very good accessibility to the workpiece.

3D CAD data available

Starting from^∗ ：	198.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing

Lateral Stops / Steel / M6

HALDER

[Specifications]
・Material: Steel
・d1: M6

The stop can be mounted on both sides of the clamping bar.

Starting from^∗ ：	42.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Locating Segments

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 10, 14
・b2(mm): 20, 34

The stop can be mounted on both sides of the clamping bar.

3D CAD data available

Starting from^∗ ：	268.65 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Mounting Screws, for jaws

HALDER

[Specifications]
・Material: Steel, tempered
・d(mm): M10
・l(mm): 23

Mounting Screws, for jaws EH 1701.

Starting from^∗ ：	8.43 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Mounting Screws, for jaws for five-sided machining

HALDER

For mounting the wedge adapters on the five-sided machining jaws as well as for mounting the insertable plates on the five-sided machining jaws.

Starting from^∗ ：	2.82 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

T-Wrenches

HALDER

[Specifications]
・Material: Steel, case-hardened
・l1(mm): 210, 250
・l2(mm): 105, 125
・System: V40, V70

Wrenches EH 1032.100-EH 1132.100

Starting from^∗ ：	48.72 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Step Jaws

HALDER

Top face and side face, with thread for mounting of parallel jaws. Ground clamping surfaces. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.

3D CAD data available

Starting from^∗ ：	360.93 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Multi-Vices, MS 125

HALDER

Scope of application:
Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
Product features:
High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
Scope of supply:
1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
Please order the clamping jaws separately.

3D CAD data available

Starting from^∗ ：	2,749.75 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Multi-Vices, MS 125eco

HALDER

The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
Scope of supply:
1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.

Starting from^∗ ：	2,340.67 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pivot Jaws, movable / Jaw, movable

HALDER

One side smooth and ground, the other side ribbed. 360° swivel. Use together with hardened base jaws (Art. No. 1701.120). Suitable for mounting of swap-on parallels (Art. No. 1701.190 - 1701.200).

Starting from^∗ ：	692.32 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Positioning Clamping Bars, two-sided

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・b1(mm): 10, 14
・b2(mm): 20, 30
・System: V40, V70

Positioning Clamping Bars, two-sided EH 1049.200-EH 1149.200

3D CAD data available

Starting from^∗ ：	310.78 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Prismatic Jaws

HALDER

For horizontal and vertical clamping of round and flat workpieces. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a two piece.

Starting from^∗ ：	605.31 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pull-Down Sets, high

HALDER

Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
Supplied in handycase consisting of:
4 x wedge adapters, high (Art. No. 1703.310). 4 x bolts, high M 10 x 45 mm (Art. No. 1703.330). 4 x wedge elements, 4 point (Art. No. 1703.340). 4 x wedge elements, Microgripper (Art. No. 1703.350). 4 x clamping bolts 48 mm (Art. No. 1703.440). 4 x clamping bolts 34 mm (Art. No. 1703.420).

Starting from^∗ ：	1,652.88 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Pull-Down Sets, low

HALDER

Pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the clamping bolts largely reduces vibrations in the workpiece
Supplied in handycase consisting of:
4 x wedge adapter, low (Art. No. 1703.300). 4 x bolts, low M 10 x 30 mm (Art. No. 1703.320). 4 x wedge element, 4 point (Art. No. 1703.340). 4 x wedge element Microgripper (Art. No. 1703.350). 4 x clamping bolts 23 mm (Art. No. 1703.400). 4 x clamping bolts 34 mm (Art. No. 1703.420).

Starting from^∗ ：	1,516.62 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Screw Plugs

HALDER

[Specifications]
・Material: Plastic
・d(mm): M12, M16
・l1(mm): 25, 30
・System: L12, L16

Screw Plugs EH 1557.000-EH 1657.000

3D CAD data available

Starting from^∗ ：	0.95 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Seating Pins

HALDER

Five support heights. For levelling the workpiece on the guideway. Ground to high accuracy.

3D CAD data available

Starting from^∗ ：	70.22 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Snap-on Parallels, click

HALDER

For accurate height setting of workpiece
Height ground. Snap-on, with screw mounting
For the high sides of the jaws
Supplied as pair.

Starting from^∗ ：	182.54 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Spacers

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・d1(mm): 8.5, 13
・d2(mm): 24, 39.5, 59.5
・System: L12, V40

This mounting element is a system part of the T-slot system.

3D CAD data available

Starting from^∗ ：	15.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spacers, for the L-12 hole and dowel system

HALDER

For the L-12 hole and dowel system the disks 1107.400 - 1108.300 are used.

3D CAD data available

Starting from^∗ ：	16.40 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Standard Ranges EH 1586

HALDER

[Features]
・1586.410: Flexible 3-sided machining.You can machine up to 4 workpieces at once
・1586.411: Two ranges of 1586.410. Particularly well suited for machining long workpieces
・1586.412: Flexible 3-sided machining. 1-2 workpieces can be machined at the same time
・1586.413: Flexible 3-sided machining. Particularly well suited for machining long workpieces
・1586.414: For machining large workpieces
・1586.415: For machining cylindrical workpieces. 4 workpieces can be machined at the same time
・1586.416:For machining large workpieces. Including supports with a height of 15 mm

Starting from^∗ ：	941.07 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Step Jaws, for horizontal clamping of flat workpieces

HALDER

For horizontal clamping of flat workpieces. Please order mounting screws separately (Art. No. 1701.300).
This product is supplied as a pair.

Starting from^∗ ：	327.23 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Stops / Steel, case-hardened, ground / V70

HALDER

[Specifications]
・Material: Steel, case-hardened, ground
・h1(mm): 37, 57
・System: V70

T-Slot Systems Mounting Elements, Stops EH 1116.000-EH 1116.100

3D CAD data available

Starting from^∗ ：	80.64 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Stops, diamond coated

HALDER

[Specifications]
・Body: Tool steel, hardened
・Pin: Diamond coating
・l1(mm): 42, 44
・l2(mm): 20

Stops, diamond coated EH 1586.

3D CAD data available

Starting from^∗ ：	202.66 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Stops, Gripper Studs

HALDER

Gripper insert consists of two pins from HSS, when clamped they penetrate into the workpiece surface and may leave residual marks.

3D CAD data available

Starting from^∗ ：	206.67 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Stops, horizontal prisms

HALDER

[Specifications]
・Body: Tool steel, hardened
・b1(mm): 44
・h1(mm): 21.4
・l2(mm): 20

Stops, horizontal prisms EH 1586.

3D CAD data available

Starting from^∗ ：	168.71 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：

																						Promotional pricing
Brand	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER	HALDER
Product Series	Clamping Bars, length 100, 200, 300, 400 - 700	Clamping Cubes, semi-finished	Clamping Cubes, welded, semi-finished	Clamping Heads	Clamping Vices, fixed jaw	Clamping Vices, replacement jaw, ribbed / flat	Combination Clamping Bars	Consoles	Fixing screws for clamping bars	Floating Clamps, compact construction, separate clamping and locking M 12	Gripper Strips, reversible	Gripper Studs	Gripper Studs, low	Gripper Studs, pointed	Gripper Studs, smooth	Insertable Plates	Intermediate Elements	Intermediate Plates / Steel, case-hardened, ground / V40, V70	Jaws for Five-Sided Machining Sets	Jaws for Five-Sided Machining / Jaw	Jaws, soft	Lateral Stops / Steel / M6	Locating Segments	Mounting Screws, for jaws	Mounting Screws, for jaws for five-sided machining	T-Wrenches	Step Jaws	Multi-Vices, MS 125	Multi-Vices, MS 125eco	Pivot Jaws, movable / Jaw, movable	Positioning Clamping Bars, two-sided	Prismatic Jaws	Pull-Down Sets, high	Pull-Down Sets, low	Screw Plugs	Seating Pins	Snap-on Parallels, click	Spacers	Spacers, for the L-12 hole and dowel system	Standard Ranges EH 1586	Step Jaws, for horizontal clamping of flat workpieces	Stops / Steel, case-hardened, ground / V70	Stops, diamond coated	Stops, Gripper Studs	Stops, horizontal prisms
CAD	3D	3D	3D	3D				3D								3D	3D	3D		3D	3D		3D				3D	3D			3D				3D	3D		3D	3D			3D	3D	3D	3D
Starting from^∗	317.55 € *Unit price with basic configuration	2,686.63 € *Unit price with basic configuration	2,478.52 € *Unit price with basic configuration	113.27 € *Unit price with basic configuration	530.26 € *Unit price with basic configuration	96.92 € *Unit price with basic configuration	1,374.06 € *Unit price with basic configuration	1,293.86 € *Unit price with basic configuration	23.44 € *Unit price with basic configuration	1,091.69 € *Unit price with basic configuration	153.12 € *Unit price with basic configuration	35.14 € *Unit price with basic configuration	56.13 € *Unit price with basic configuration	56.13 € *Unit price with basic configuration	63.23 € *Unit price with basic configuration	176.88 € *Unit price with basic configuration	367.08 € *Unit price with basic configuration	136.78 € *Unit price with basic configuration	1,436.66 € *Unit price with basic configuration	742.97 € *Unit price with basic configuration	198.00 € *Unit price with basic configuration	42.30 € Special price *Unit price with basic configuration Promotional pricing	268.65 € *Unit price with basic configuration	8.43 € *Unit price with basic configuration	2.82 € *Unit price with basic configuration	48.72 € *Unit price with basic configuration	360.93 € *Unit price with basic configuration	2,749.75 € *Unit price with basic configuration	2,340.67 € *Unit price with basic configuration	692.32 € *Unit price with basic configuration	310.78 € *Unit price with basic configuration	605.31 € *Unit price with basic configuration	1,652.88 € *Unit price with basic configuration	1,516.62 € *Unit price with basic configuration	0.95 € *Unit price with basic configuration	70.22 € *Unit price with basic configuration	182.54 € *Unit price with basic configuration	15.03 € *Unit price with basic configuration	16.40 € *Unit price with basic configuration	941.07 € *Unit price with basic configuration	327.23 € *Unit price with basic configuration	80.64 € *Unit price with basic configuration	202.66 € *Unit price with basic configuration	206.67 € *Unit price with basic configuration	168.71 € *Unit price with basic configuration
Min. Shipping Days ：	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	Same day	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	Same day	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days	3 Days