HALDER Eye-Bolts, U-Bolts for Plumbing
Search by sub-category
?* Information on days to ship and prices
-
- Promotional pricing
Swing Bolts, DIN 444, form B
HALDER
Swing bolts similar to DIN 444 however, steel design with higher quality 8.8. The stainless steel A2-50 design has a tensile strength of min. 500 N/mm2.- 3D CAD data available
Starting from∗ ： 4.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking
HALDER
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
[Operation]
The threaded elements are unlocked by pressing the button.- 3D CAD data available
Starting from∗ ： 175.17 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
- Promotional pricing
Lifting Pin Self-Locking
HALDER
[Features]
· Corrosion resistant
· Heat resistant to 250°C
· Locating· Bushing use one from 22350.0900 to 0.0936 (for d1 = 8, 10, 12, 16).
· Fitting for hanging that is speedy and simple to use yet solid.
· The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally.
· A tap hole is not required for the item to be hung, only a H11 hole is needed.- 3D CAD data available
Starting from∗ ： 67.17 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Lifting Pin, Self-Locking, Stainless Steel
HALDER
[Features]
· Has high corrosion and weather resistance enabling use outdoors
· Pin part uses hardened stainless steel and so has high strength
· Operating temperature range is to a maximum of 250°C
· Locating· Bushing use from 22350.0900 to 0.0936 (d1 = 8, 10, 12, 16) as well.
· Fitting for hanging that is speedy and simple to use yet solid. The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally. A tap hole is not required for the item to be hung, only a H11 hole is needed.- 3D CAD data available
Starting from∗ ： 121.57 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Locating· For Bushing Lifting Pin
HALDER
This bushing is a reliable holder for the safety of the lifting pin EH22350. [Features]
· Mounting is simple and reliable.
· Can be mounted to products made of various material.
· Can be used in narrow areas or blind holes.
· High corrosion resistance
· Wear resistant- 3D CAD data available
Starting from∗ ： 34.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking, for centre holes according to DIN 332
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
- 3D CAD data available
Starting from∗ ： 189.97 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking, with rotatable shackle
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
- 3D CAD data available
Starting from∗ ： 303.41 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Ball Lock Connectors, self-locking, with holder, compact construction
HALDER
Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.
The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood and one version that can be mounted into plastic.
As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.
[Operation]
The balls are unlocked by pressing the knob.Starting from∗ ： 6.71 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Ball Lock Connectors, self-locking, holder / Bushing holder, function Nominal mm / mm / mm
HALDER
Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.The ball lock connector is maintenancefree, soundless and secured against loss.Starting from∗ ： 14.09 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking - INCH
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
Notes
- • This product is manufactured in INCH dimensions.
- 3D CAD data available
Starting from∗ ： 193.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Threaded Lifting Pins, self-locking, with rotatable shackle - INCH
HALDER
MaterialPin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardenedPress button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
Notes
- • This product is manufactured in INCH dimensions.
- 3D CAD data available
Starting from∗ ： 311.03 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Nominal (M) |
| Length L (mm) |
| Material |
| Surface Treatment |
| Pitch(mm) |
| Tip Shape |
| Strength Class (Steel) |
| Thread Type |
| Sales Unit |
| Screw Nominal (inch) |
| Application |
| Screw Type |
| Technical Standard |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Threaded Lifting Pins, self-locking, for centre holes according to DIN 332 | Ball Lock Connectors, self-locking, with holder, compact construction | Ball Lock Connectors, self-locking, holder / Bushing holder, function Nominal mm / mm / mm | Threaded Lifting Pins, self-locking, with rotatable shackle - INCH | |||||||
| CAD |
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 4.22 € Special price *Unit price with basic configuration Promotional pricing | 175.17 € *Unit price with basic configuration | 67.17 € Special price *Unit price with basic configuration Promotional pricing | 121.57 € Special price *Unit price with basic configuration Promotional pricing | 34.22 € Special price *Unit price with basic configuration Promotional pricing | 189.97 € *Unit price with basic configuration | 303.41 € *Unit price with basic configuration | 6.71 € *Unit price with basic configuration | 14.09 € *Unit price with basic configuration | 193.91 € *Unit price with basic configuration | 311.03 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 2 Days | Same day | Same day | Same day | 3 Days | 3 Days | 2 Days | 1 Day | 3 Days | 3 Days |
| Screw Nominal (M) | M5 ～ M24 | M8 ～ M30 | - | - | - | M10 ～ M24 | M10 ～ M24 | - | - | - | - |
| Length L (mm) | 25 ～ 200 | 17.6 ～ 45 | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel ～ Steel | Stainless Steel ～ Steel | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - |
| Pitch(mm) | - | - | - | - | - | - | - | - | - | - | - |
| Tip Shape | Flat End | Flat End | - | - | - | - | - | - | - | - | - |
| Strength Class (Steel) | 8.8 | - | - | - | - | - | - | - | - | - | - |
| Thread Type | Metric Coarse | Metric Coarse | - | - | - | - | - | - | - | - | - |
| Sales Unit | - | Low Quantity (Available beginning with 1 pc.) | - | - | - | - | - | - | - | - | - |
| Screw Nominal (inch) | - | - | - | - | - | - | - | - | - | - | - |
| Application | Standard | Heat Resistance / Chemical Resistance / High Strength | - | - | - | - | - | - | - | - | - |
| Screw Type | Semi-finished Bolt | - | - | - | - | - | - | - | - | - | - |
| Technical Standard | DIN | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Nominal (M)
-
Length L (mm)
-
Material
-
Surface Treatment
- Not Provided
- Black Oxide
- Black Oxide
- Trivalent Chromate
- Bright Chrome Plating
-
Pitch(mm)
-
Tip Shape
-
-
Rounded End
-
-
Strength Class (Steel)
-
Thread Type
- Metric Coarse
- Whit Coarse
-
Sales Unit
-
Screw Nominal (inch)
-
Application
-
Screw Type
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 1 Day or Less
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 12 Days or Less
- 14 Days or Less
Categories related to Eye-Bolts, U-Bolts for Plumbing
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.