KIPP Fastening Related Components

· For connecting and positioning workpieces one under the other· Hardened and ground

· For connecting and positioning workpieces one under the other

· Axially mounted elements for shafts· Transfers high axial forces· Version: steel or stainless steel

· Securing elements for holes· Transfers high axial forces· Version: steel or stainless steel

· For connecting and positioning workpieces one under the other· Hardened and ground· Easily removable

· Fastening bearings on shafts.· Universally applicable· Eases the installation of bearings

· For removing locating pins and pins with internal threads· Punch handle tempered and chrome-plated· Shaft, end stop and guide sleeve hardened and chrome-plated.

· Simple locking element· Is inserted in shaft groove· Version: steel or stainless steel

· For securing bolts, tubes, shafts etc.· Simple and quick fitting and removal· Reusable

· For round tubes· For simple fastening of feet and castors· Different thread sizes

[Specifications]・Main material: Aluminum・Surface finish body: Anodized・Component material: Nitrile rubber・Nominal diameter(mm): 21-37・Suitable for bores / hex sockets(mm): 8-17[Features]・Destructive reusable system・Prevents swarf and coolant from building up and accumulating in screw heads and countersinks・Quick and easy assembly and dismantling.

· Sealing the grid holes

· For hex nuts and bolts· Keeps out dirt· Protects against sharp edges· Body white or black

Material:Steel 1.1191 (CK45). Tensile strength ≈700 N/mm². Version:Black oxidised. Note:Hoist screws acc. to VDI 3366. As a rule, there should always be four hoist screws fitted. When using four hoist screws, it should be ensured that two hoist screws carry the entire weight of the tool. Thus, when rotating the tool, the load can be distributed across two hoist screws.

· Fastening a bearing on a shaft.· Universally applicable· Makes it easier to install bearings.

[Specifications]・Main material: High carbon steel, Stainless steel・Surface finish body: Black oxidized・D=thread(mm): M5-M20[Features]・For moving connections・Material: Carbon steel 1.1191 or stainless steel 1.4305.・Version: Carbon steel tempered and black oxidised. Stainless steel bright

· Sealing the grid holes

· Sealing the grid holes

· Accessories for KIPP basic elements· For protecting reamed holes from swarf and dust

· For aligning fixtures and clamps· Hardened

· Extension of threaded rods

· For aligning and fastening the 3 and 5-axis clamping systems· Suitable for T-slot tables with slot width 14 and 18

· Universal fastening element· Compatible with all conventional aluminium profiles· Electro zinc-plated steel version

· For square tubes· For simple fastening of feet and castors· Different thread sizes

· For square tubes· For simple fastening of feet and castors· Different thread sizes

· Height-adjustable· For hard and soft floors.· For round and square tubes

· Height-adjustable· For hard and soft floors.· For round and square tubes

· Height-adjustable· For hard and soft floors.· For round and square tubes

· Height-adjustable· With non-slip inserts· For smooth floors· For round and square tubes

· Height-adjustable· With non-slip inserts· For smooth floors· For round and square tubes

· Height-adjustable· With non-slip inserts· For smooth floors· For round and square tubes

· Height-adjustable· With felt glide surface· For sensitive and hard floors· For round and square tubes

· Height-adjustable· With felt glide surface· For sensitive and hard floors· For round and square tubes

· Height-adjustable· With felt glide surface· For sensitive and hard floors· For round and square tubes

· For round and square tubes· With felt glide surface· Gentle gliding· Noise dampening· For sensitive and hard floors

· For round and square tubes· With felt glide surface· Gentle gliding· Noise dampening· For sensitive and hard floors

· For round and square tubes· With felt glide surface· Gentle gliding· Noise dampening· For sensitive and hard floors

Material:Steel 1.1191 (CK45). Tensile strength ≈700 N/mm². Version:Black oxidised. Note:Hoist pins acc. to VDI 3366. As a rule, there should always be four hoist pins fitted. When using four hoist pins, it should be ensured that two hoist pins carry the entire weight of the tool. Thus, when rotating the tool, the load can be distributed across two hoist pins.Supplied with cap screws.

· Versatile application for transport tasks· Ball bearing· Suitable for aluminium profiles with slot width 8· Spring-loaded fastening stud· Can be retrofitted to existing structures

Product description: Fastening sets for thin-walled parts are used e.g. to secure indexing plungers to sheet metal. Material: Steel or stainless steel 1.4305. Version: Steel, black oxidised. Stainless steel, bright.