Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

MAEDLER Toothed Belt Pulleys / Timing Pulleys / Idlers

Type

    • Tensioning Rollers / Idlers TS for Belt Drives
      • Volume Discount

      MAEDLER

      Tensioning Rollers / Idlers TS for Belt Drives

      Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges.Distance bushes and ball bearings from steel. Tensioning Rollers / Idlers are used on the outside of the belt (back of belt). Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings. One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side).Support, screw set and tensioning element have to be ordered separately.
      Více informací
      TypeTooth Type (Belt Type)Belt Width (mm)Belt Width (inch)No. of TeethPulley ShapeMaterialSurface Treatment
      ------Aluminium-
      Cena (bez DPH) od:
      10.35 €
      Cena včetně DPH:
      12.32 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat
    • Distance Bushes for Tensioning Rollers / Idlers TS
      • Volume Discount

      MAEDLER

      Distance Bushes for Tensioning Rollers / Idlers TS

      Material: Steel, zinc-plated. As spare part or as an additional distance bush for double-sided mounting.
      Více informací
      TypeTooth Type (Belt Type)Belt Width (mm)Belt Width (inch)No. of TeethPulley ShapeMaterialSurface Treatment
      ------Steel-
      Cena (bez DPH) od:
      0.39 €
      Cena včetně DPH:
      0.46 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat
    • Screw Sets for Tensioning Rollers / Idlers TS
      • Volume Discount

      MAEDLER

      Screw Sets for Tensioning Rollers / Idlers TS

      Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8. The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tensioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.
      Více informací
      TypeTooth Type (Belt Type)Belt Width (mm)Belt Width (inch)No. of TeethPulley ShapeMaterialSurface Treatment
      ------Steel-
      Cena (bez DPH) od:
      1.11 €
      Cena včetně DPH:
      1.32 €
      Běžné datum odeslání:
      4 pracovních dnů
      Konfigurovat