MAEDLER Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 12.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-A
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 16.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SIG
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness Rz max. 12.5 μm.- Volume Discount
Starting from∗ ： 29.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-B
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 19.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-L, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Starting from∗ ： 34.86 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 14.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 15.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 2517
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 17.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies BAR
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Starting from∗ ： 24.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-AS
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques. Like COM-A, but with slotted rings.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 12.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1108
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 5.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 3525
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 39.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 18.04 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB3
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• 3 Ranges of sizes, for middle, higher and very high torques.
• Compact size in axial direction.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 13.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1008
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 5.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TT 3-16 mm
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Starting from∗ ： 32.86 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSD-N
MAEDLER
Material: Stainless steel 1.4568 (17/7 PH).
The MSD-N clamping bush is identical with the MSD bush, but is made from stainless steel. It has been used in many industries for years, as, e.g., the food, medical, automotive, chemical, printing and process engineering industries.
Concentricity 0.03 - 0.06 mm.
Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.
Temperature range: - 30 °C to + 85 °C.
PW ≈ 90N/mm², PN ≈ 70N/mm²- Volume Discount
Starting from∗ ： 317.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSD
MAEDLER
Material: Steel.
The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
Concentricity: ≈ 0.03 - 0.06 mm.
Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
Temperature range: -30 °C to 85 °C.
PW ≈ 90N/mm² PN ≈ 70N/mm132- Volume Discount
Starting from∗ ： 199.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spare Screws for Taper Bushes
MAEDLER
Material: Steel.
Supply: One screw. Order quantity as needed.
Taper bushes have two or (from size 3525) three screws, depending on bush size. Thread BSW (Whitworth), with metric hexagon.- Volume Discount
Starting from∗ ： 0.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adaptors for Taper Bushes
MAEDLER
Material: Grey Cast Iron GG25.
Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø da (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.- Volume Discount
Starting from∗ ： 7.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bolt-on Hubs for Taper Bushes
MAEDLER
Material: Grey Cast Iron GG25. Product No. 14090147: from steel.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.- Volume Discount
Starting from∗ ： 14.46 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies BAR, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Self-centering.
• Slight axial offset possible during assembly.- Volume Discount
Starting from∗ ： 28.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies BAR, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• Stainless Steel.
• For low torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Starting from∗ ： 96.16 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-A, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 20.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-A, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For low torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 51.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-B, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 21.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-B, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For low torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 71.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium to high torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Starting from∗ ： 20.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Starting from∗ ： 72.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB1
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Starting from∗ ： 12.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB2
MAEDLER
Material: Steel.
• For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 12.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-D
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Starting from∗ ： 16.71 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-L
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Starting from∗ ： 30.00 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LL
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Starting from∗ ： 32.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LLH
MAEDLER
Material: Steel.
• For fixing a hub (e.g. sprocket or similar) on a shaft.
• For very high torques.
• Very good distribution of pressure.
• High resistant against bending forces.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Starting from∗ ： 54.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-R
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower to medium torques.
• Not self-centering.
• Loose clamping rings. For use with customer's pressure sleeves and customer´s screws.
• Up to 4 clamping sets can be used in line.
• Versatile usage, for customized solutions.- Volume Discount
Starting from∗ ： 5.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1210
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 7.18 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1215
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 8.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1610
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 8.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1615
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 9.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 2012
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 11.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 3020
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 22.50 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 3030
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 32.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 3535
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 51.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 4030
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. With three screws. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Starting from∗ ： 65.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 12.78 € *Unit price with basic configuration Volume Discount | 16.09 € *Unit price with basic configuration Volume Discount | 29.84 € *Unit price with basic configuration Volume Discount | 19.08 € *Unit price with basic configuration Volume Discount | 34.86 € *Unit price with basic configuration Volume Discount | 14.88 € *Unit price with basic configuration Volume Discount | 15.88 € *Unit price with basic configuration Volume Discount | 17.42 € *Unit price with basic configuration Volume Discount | 24.93 € *Unit price with basic configuration Volume Discount | 12.73 € *Unit price with basic configuration Volume Discount | 5.47 € *Unit price with basic configuration Volume Discount | 39.64 € *Unit price with basic configuration Volume Discount | 18.04 € *Unit price with basic configuration Volume Discount | 13.07 € *Unit price with basic configuration Volume Discount | 5.14 € *Unit price with basic configuration Volume Discount | 32.86 € *Unit price with basic configuration Volume Discount | 317.06 € *Unit price with basic configuration Volume Discount | 199.10 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration Volume Discount | 7.07 € *Unit price with basic configuration Volume Discount | 14.46 € *Unit price with basic configuration Volume Discount | 28.53 € *Unit price with basic configuration Volume Discount | 96.16 € *Unit price with basic configuration Volume Discount | 20.26 € *Unit price with basic configuration Volume Discount | 51.84 € *Unit price with basic configuration Volume Discount | 21.74 € *Unit price with basic configuration Volume Discount | 71.08 € *Unit price with basic configuration Volume Discount | 20.05 € *Unit price with basic configuration Volume Discount | 72.66 € *Unit price with basic configuration Volume Discount | 12.31 € *Unit price with basic configuration Volume Discount | 12.69 € *Unit price with basic configuration Volume Discount | 16.71 € *Unit price with basic configuration Volume Discount | 30.00 € *Unit price with basic configuration Volume Discount | 32.52 € *Unit price with basic configuration Volume Discount | 54.08 € *Unit price with basic configuration Volume Discount | 5.93 € *Unit price with basic configuration Volume Discount | 7.18 € *Unit price with basic configuration Volume Discount | 8.37 € *Unit price with basic configuration Volume Discount | 8.19 € *Unit price with basic configuration Volume Discount | 9.73 € *Unit price with basic configuration Volume Discount | 11.31 € *Unit price with basic configuration Volume Discount | 22.50 € *Unit price with basic configuration Volume Discount | 32.63 € *Unit price with basic configuration Volume Discount | 51.53 € *Unit price with basic configuration Volume Discount | 65.07 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | - | Provided | Not Provided | - | - | Provided | Provided | - | Provided | Provided | Provided | - | - | - | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | - | - | - | - | - | - | - | - | - |
| Body Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Centering
- Provided
- Not Provided
-
Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Narrow search by specifying Brand
-
- MISUMI (6)
- MAEDLER (61)
- RINGFEDER (28)
- CONCAR (26)
- ISEL (10)
- KBK (9)
- SUNGIL (9)
- NORELEM (3)
- KATAYAMA CHAIN (3)
- OPTIBELT (2)
- CAP (2)
- MIKI PULLEY (2)
- HALDER (2)
- Save & Secure (2)
- EVER-ON CORPORATION (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Keyless Bushing (Fastening Fittings)
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.