Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování

Vymazat vše

  • Screw Types
  • Screw size (Nominal)
  • Pitch (P), Number of Threading(mm)
  • Tool Material Type
  • work material
  • Výrobce

MISUMI Screw-Hole-Related Tools(Coating Type:TiAlN)

  • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

    Threading cutters that enable the high-speed stable processing are available at special prices
    Více informací
    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
    MeterM3 ~ M200.5 ~ 2.5-CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailable
    Cena (bez DPH) od:
    108.15 €
    Cena včetně DPH:
    128.70 €
    Běžné datum odeslání:
    5 pracovních dnů
    Konfigurovat
  • TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

    The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.
    Více informací
    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
    MeterM2 ~ M120.4 ~ 1.75-CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailable
    Cena (bez DPH) od:
    213.66 €
    Cena včetně DPH:
    254.26 €
    Běžné datum odeslání:
    7 pracovních dnů
    Konfigurovat
  • TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

    [Features] -Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible-Reduced cutting load due to short flute length (3 webs)-Enables effective thread cutting right into the corners of blind holes.
    Více informací
    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
    MeterM1.4 ~ M200.3 ~ 2.5-CarbideLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Thread cutterFor through hole / For blind holeAvailable
    Cena (bez DPH) od:
    174.76 €
    Cena včetně DPH:
    207.96 €
    Běžné datum odeslání:
    7 pracovních dnů
    Konfigurovat