MISUMI Roller Bearings

It consists of 1 pressure mount and 2 washers and can take axial loads.

The dust-tight cover is fitted on the side of the thrust bearing to prevent dirt ingress and lubricant leakage.

■Features: As a bearing with an outer ring, it has the lowest cross-sectional height, enabling space saving and cost reduction.

■Features: These bearings have needle rollers and cages built into the machined outer ring, and are suitable for high-speed, high-load applications due to their high rigidity and high bearing accuracy.

■Features: Designed so that the raceway surfaces of the inner and outer rings and the apex of the conical surface of the rollers meet at one point on the center line of the bearing, these bearings are suitable for applications where heavy loads or impact loads are applied. They can support axial load in one direction, as well as radial load.

The dustproof cover is fitted on the side of the thrust bearing to prevent dirt ingress and lubricant leakage. Since it can support both radial and thrust loads simultaneously, a compact design as a fixed bearing part is possible.

■Features: Since it can receive both radial load and axial load at the same time, it can be designed compactly as a fixed side bearing section. With Cover Type includes a dust cover to prevent intrusion of dirt and lubricant leakage.

■Features: It can be used to support low-speed rotating bodies with a large dynamic load rating that supports radial loads.Since the one with a cover is equipped with a dust-proof cover to prevent dust from entering and lubricant from leaking.

[Features]Roller bearings subjected to a large dynamic axial load.